Publikationen

Veröffentlichungen des Fachbereichs Maschinenbau

Nachfolgend finden Sie eine Übersicht der Publikationen, die im Fachbereich Maschinenbau entstanden und bei der Universitäts-und Landesbibliothek (ULB) Darmstadt gelistet sind.

Weitere Informationen dazu finden Sie bei TU Biblio .

Anzahl der Einträge auf dieser Ebene: 16450.

Artikel

Li, Can ; Lv, Qimeng ; Wu, Yingchun ; Wu, Xuecheng ; Tropea, Cameron (2020):
Measurement of transient evaporation of an ethanol droplet stream with phase rainbow refractometry and high-speed microscopic shadowgraphy.
146, In: International Journal of Heat and Mass Transfer, 2020, Elsevier, S. 118843, ISSN 00179310, DOI: 10.1016/j.ijheatmasstransfer.2019.118843,
[Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118843],
[Artikel]

Haaf, Martin ; Peters, Jens ; Hilz, Jochen ; Unger, Antonio ; Ströhle, Jochen ; Epple, Bernd (2020):
Combustion of solid recovered fuels within the calcium looping process – Experimental demonstration at 1 MWth scale.
113, In: Experimental Thermal and Fluid Science, 33, Elsevier, S. 110023, ISSN 08941777, DOI: 10.1016/j.expthermflusci.2019.110023,
[Online-Edition: https://doi.org/10.1016/j.expthermflusci.2019.110023],
[Artikel]

Wang, H. ; Scholtissek, A. ; Dietzsch, F. ; Hasse, C. (2020):
Effects of Soret diffusion on turbulent non-premixed H2 jet flames.
213, In: Combustion and Flame, 2020, Elsevier BV, S. 39-51, e-ISSN 1556-2921, DOI: 10.1016/j.combustflame.2019.11.029,
[Artikel]

Brulin, Sebastian ; Tropea, Cameron ; Roisman, Ilia V. (2020):
Pinch-off of a viscous liquid bridge stretched with high Reynolds numbers.
587, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, Elsevier, S. 124271, ISSN 09277757, DOI: 10.1016/j.colsurfa.2019.124271,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2019.124271],
[Artikel]

Löwe, Jens-Michael ; Engelhardt, Jan ; Secklehner, Maximilian ; Hinrichsen, Volker (2020):
Determination of the Spatial Impulse Response of Compensating Electrostatic Voltmeters.
27, In: IEEE Transactions on Dielectrics and Electrical Insulation, 2020, (1), IEEE, S. 47-52, ISSN 0018-9367; 1070-9878, e-ISSN 1557-962X; 1558-4135, DOI: 10.1109/TDEI.2019.008305,
[Artikel]

Wen, X. ; Rieth, M. ; Scholtissek, A. ; Stein, O. T. ; Wang, H. ; Luo, K. ; Kronenburg, A. ; Fan, J. ; Hasse, C. (2020):
A comprehensive study of flamelet tabulation methods for pulverized coal combustion in a turbulent mixing layer - Part II: Strong heat losses and multi-mode combustion.
In: Combustion and Flame, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.12.028,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0010218019...],
[Artikel]

Frommater, S. ; Neumann, J. ; Hasse, C. (2020):
A phenomenological modelling framework for particle emission simulation in a direct-injection gasoline engine.
In: International Journal of Engine Research, DOI: 10.1177/1468087419895161,
[Online-Edition: https://doi.org/10.1177/1468087419895161],
[Artikel]

Flegler, Felix ; Neuhäuser, Simon ; Groche, Peter (2020):
Influence of sheet metal texture on the adhesive wear and friction behaviour of EN AW-5083 aluminum under dry and starved lubrication.
141, In: Tribology International, Elsevier, S. 105956, ISSN 0301-679X, DOI: 10.1016/j.triboint.2019.105956,
[Artikel]

Drass, Michael ; Rosendahl, Philipp Laurens ; Kraus, Michael A. ; Kolupaev, Vladimir A. ; Schneider, Jens ; Becker, Wilfried (2020):
Coupled distortional–dilatational failure mode concept for rubber-like materials.
In: Engineering Fracture Mechanics, [Artikel]

Tenzer, Fabian M. ; Roisman, Ilia V. ; Tropea, Cameron (2019):
Fast transient spray cooling of a hot thick target.
881, In: Journal of Fluid Mechanics, 2019, S. 84-103, ISSN 0022-1120, DOI: 10.1017/jfm.2019.743,
[Online-Edition: https://doi.org/10.1017/jfm.2019.743],
[Artikel]

Gerlach, Felix ; Hartmann, Maximilian ; Tropea, Cameron (2019):
The interaction of inner and outer surface corners during spontaneous wetting.
583, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2019, S. 123977, ISSN 09277757, DOI: 10.1016/j.colsurfa.2019.123977,
[Artikel]

Henrich, Franziska ; Linke, Dorota ; Sauer, Hans Martin ; Dörsam, Edgar ; Hardt, Steffen ; Butt, Hans-Jürgen ; Auernhammer, Günter K. (2019):
Forced dynamic dewetting of structured surfaces: Influence of surfactants.
4, In: Physical Review Fluids, 2019, (12), American Physical Society, S. 124202, ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.4.124202,
[Online-Edition: https://link.aps.org/doi/10.1103/PhysRevFluids.4.124202],
[Artikel]

Smuda, Martin ; Oberlack, Martin (2019):
On the analytical solution of the two-phase Couette flow with wall transpiration.
31, In: Physics of Fluids, (12), S. 123603, ISSN 1070-6631, DOI: 10.1063/1.5119795,
[Artikel]

Köhler, Stefan ; Husmann, Henning ; Corbean, Daniel ; Groche, Peter (2019):
Analytical modelling of buckling in stringer sheet forming.
In: International Journal of Material Forming, 2019, Springer, ISSN 1960-6206, e-ISSN 1960-6214, DOI: 10.1007/s12289-019-01518-y,
[Online-Edition: https://doi.org/10.1007/s12289-019-01518-y],
[Artikel]

Kersten, Antje ; Lang, Silvia ; Harling, Antje (2019):
Mikroplastik - relevant für die Papierindustrie? Eine Bestandsaufnahme.
147, In: Wochenblatt für Papierfabrikation, (11), S. 698-703, [Artikel]

Mittelstedt, Christian (2019):
Buckling and Postbuckling of Thin-walled Composite Laminated Beams - A Review of Engineering Analysis Methods.
In: Applied Mechanics Reviews, 2019, ASME, S. AMR-19-1052, ISSN 0003-6900, DOI: 10.1115/1.4045680,
[Online-Edition: https://doi.org/10.1115/1.4045680],
[Artikel]

Dorsch, M. ; Neumann, J. ; Hasse, C. (2019):
Fully coupled control of a spark-ignited engine in driving cycle simulations.
4, In: Automotive and Engine Technology, (3), S. 125-137, ISSN 2365-5135, DOI: 10.1007/s41104-019-00050-0,
[Online-Edition: https://doi.org/10.1007/s41104-019-00050-0],
[Artikel]

Hatakenaka, Ryuta ; Breitenbach, Jan ; Roisman, Ilia V. ; Tropea, Cameron ; Tagawa, Yoshiyuki (2019):
Magic carpet breakup of a drop impacting onto a heated surface in a depressurized environment.
145, In: International Journal of Heat and Mass Transfer, 2019, Elsevier, S. 118729, ISSN 00179310, DOI: 10.1016/j.ijheatmasstransfer.2019.118729,
[Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118729],
[Artikel]

Kersten, Antje ; Schabel, Samuel ; Helmlinger, Lars ; Hoffmann, Christina ; Rudloff, Johannes ; Lang, Marieluise ; Hochrein, Thomas ; Bastian, Martin ; Runte, Saskia ; Pietsch, Arne (2019):
CO2 entfernt kritische Substanzen.
74, In: Recycling Magazin, (11), S. 45-47, [Artikel]

Mittelstedt, S. ; Mittelstedt, C. (2019):
Mixed-mode buckling of shear-deformable composite laminated I-beams.
In: International Journal of Mechanical Sciences, 2019, S. 105332, ISSN 0020-7403, DOI: 10.1016/j.ijmecsci.2019.105332,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0020740319...],
[Artikel]

Schwenke, K. Uta ; Spiehl, Dieter ; Krauße, Marcel ; Riedler, Laura ; Ruppenthal, Anna ; Villforth, Klaus ; Meckel, Tobias ; Biesalski, Markus ; Rupprecht, Daniel ; Schwall, Gerhard (2019):
Analysis of free chlorine in aqueous solution at very low concentration with lateral flow tests.
9, In: Scientific reports, (1), S. 17212, ISSN 2045-2322, DOI: 10.1038/s41598-019-53687-0,
[Online-Edition: https://doi.org/10.1038/s41598-019-53687-0],
[Artikel]

Bender, Achim ; Stroh, Alexander ; Frohnapfel, Bettina ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2019):
A Novel Two-Step Model to Investigate Turbulent Gas Flows Shearing Thin Liquid Films.
19, In: Proceedings in Applied Mathematics and Mechanics, (1), Wiley-VCH, S. e201900083, ISSN 1617-7061, DOI: 10.1002/pamm.201900083,
[Online-Edition: https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.2019000...],
[Artikel]

Schneider, P. ; Kienzler, R. (2019):
Dual-energy extension of the uniform-approximation approach.
19, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), Wiley, S. e201900222, ISSN 1617-7061, DOI: 10.1002/pamm.201900222,
[Online-Edition: https://onlinelibrary.wiley.com/doi/abs/10.1002/pamm.2019002...],
[Artikel]

Sabia, Gabriele ; Heinze, Christian ; Alobaid, Falah ; Martelli, Emanuele ; Epple, Bernd (2019):
ASPEN dynamics simulation for combined cycle power plant – Validation with hot start-up measurement.
187, In: Energy, Elsevier, S. 115897, ISSN 0360-5442, DOI: 10.1016/j.energy.2019.115897,
[Artikel]

Müller, T. M. ; Leise, Philipp ; Lorenz, Imke ; Altherr, Lena C. ; Pelz, P. F. (2019):
Optimization and Validation of Pumping System Design and Operation for Water Supply in High-Rise Buildings.
In: Optimization Online, Mathematical Optimization Society, S. 1-43, [Online-Edition: http://www.optimization-online.org/DB_HTML/2019/11/7463.html],
[Artikel]

Weigold, Matthias ; Abele, Eberhard ; Panten, Niklas ; Grosch, Benedikt (2019):
Datengestützte Verfahren für einen energieeffizienten und flexiblen Betrieb von Produktions- und Versorgungstechnik (Teil 4): Reihe: Künstliche Intelligenz, Maschinendaten, Algorithmen, Effizienz, Geschäftsmodelle.
In: Werkstatt + Betrieb : WB - Portal für spanende Fertigung, Carl Hanser Verlag, ISSN 0177-8897, [Online-Edition: https://www.werkstatt-betrieb.de/fachinformationen/e-only/ar...],
[Artikel]

Großmann, A. ; Felger, J. ; Frölich, T. ; Gosmann, J. ; Mittelstedt, C. (2019):
Melt pool controlled laser powder bed fusion for customised low-density lattice structures.
In: Materials & Design, S. 108054, ISSN 02641275, DOI: 10.1016/j.matdes.2019.108054,
[Artikel]

Hartl, S. ; Geyer, D. ; Hasse, C. ; Zhao, X. ; Wang, H. ; Barlow, R. S. (2019):
Assessing an experimental approach for chemical explosive mode and heat release rate using DNS data.
209, In: Combustion and Flame, Elsevier BV, S. 214-224, ISSN 1556-2921, DOI: 10.1016/j.combustflame.2019.07.038,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2019.07.038],
[Artikel]

Wen, X. ; Stein, Oliver T. ; Tufano, G. L. ; Kronenburg, A. ; Scholtissek, A. ; Hasse, C. (2019):
Multi-dimensional and transient effects on flamelet modeling for turbulent pulverized coal combustion.
255, In: Fuel, Elsevier, S. 115772, ISSN 0016-2361, DOI: 10.1016/j.fuel.2019.115772,
[Online-Edition: https://doi.org/10.1016/j.fuel.2019.115772],
[Artikel]

Bier, Lukas ; Emele, Michael ; Gut, Katja ; Kulenovic, Jasna ; Rzany, David ; Peter, Max ; Abendroth, Bettina (2019):
Preventing the risks of monotony related fatigue while driving through gamification.
11, In: European Transport Research Review, Springer, S. 44, ISSN 1866-8887 (online), 1867-0717 (print), DOI: 10.1186/s12544-019-0382-4,
[Online-Edition: https://link.springer.com/article/10.1186/s12544-019-0382-4?...],
[Artikel]

Wassenberg, Joern R. ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2019):
The influence of splattering on the development of the wall film after horizontal jet impingement onto a vertical wall.
60, In: Experiments in Fluids, (11), Springer, S. 173, ISSN 0723-4864, e-ISSN 1432-1114, DOI: 10.1007/s00348-019-2810-6,
[Online-Edition: https://doi.org/10.1007/s00348-019-2810-6],
[Artikel]

Vorwerk-Handing, Gunnar ; Gwosch, Thomas ; Schork, Stefan ; Kirchner, Eckhard ; Matthiesen, Sven (2019):
Classification and Examples of Next Generation Machine Elements.
In: Forschung im Ingenieurwesen, Springer, ISSN 1434-0860, DOI: 10.1007/s10010-019-00382-1,
[Artikel]

Hoche, Holger ; Pusch, Casper ; Oechsner, Matthias (2019):
Establishing PVD-coatings for the corrosion protection of mild steel substrates for tribological and corrosive stresses.
376, In: Surface and Coatings Technology, Elsevier, S. 74-83, ISSN 02578972, DOI: 10.1016/j.surfcoat.2018.06.007,
[Artikel]

Schneider, P. ; Kienzler, R. (2019):
A priori estimation of the systematic error of consistently derived theories for thin structures.
In: International Journal of Solids and Structures, Elsevier, ISSN 0020-7683, DOI: 10.1016/j.ijsolstr.2019.10.010,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0020768319...],
[Artikel]

Weigold, Matthias ; Metternich, Joachim ; Bardy, Sebastian ; Ziegenbein, Amina ; Stanula, Patrick (2019):
Intelligente Zustandsüberwachung des Werkzeugverschleißes — Fallbeispiele aus der Instandhaltung (Teil 3): Reihe: Künstliche Intelligenz, Maschinendaten, Algorithmen, Effizienz, Geschäftsmodelle.
2019, In: Werkstatt + Betrieb : WB : Portal für spanende Fertigung, (E-Paper), Carl Hanser Verlag, [Online-Edition: https://www.werkstatt-betrieb.de/fachinformationen/e-only/ar...],
[Artikel]

Dressler, L. ; Ries, F. ; Kuenne, G. ; Janicka, J. ; Sadiki, A. (2019):
Analysis of Shear Effects on Mixing and Reaction Layers in Premixed Turbulent Stratified Flames using LES coupled to Tabulated Chemistry.
2019, In: Combustion Science and Technology, Taylor & Francis, S. 1-16, ISSN 1563-521X, DOI: 10.1080/00102202.2019.1678915,
[Online-Edition: https://doi.org/10.1080/00102202.2019.1678915],
[Artikel]

Geschwindner, Christopher ; Kranz, Patrick ; Welch, Cooper ; Schmidt, Marius ; Böhm, Benjamin ; Kaiser, Sebastian A. ; De la Morena, Joaquin (2019):
Analysis of the interaction of Spray G and in-cylinder flow in two optical engines for late gasoline direct injection.
In: International Journal of Engine Research, (Online First), Sage Publications, S. 146808741988153, ISSN 1468-0874, DOI: 10.1177/1468087419881535,
[Online-Edition: https://doi.org/10.1177/1468087419881535],
[Artikel]

Khalil, Adnan ; Zimmermann, Matthias ; Bell, Alena K. ; Kunz, Ulrike ; Hardt, Steffen ; Kleebe, Hans-Joachim ; Stark, Robert W. ; Stephan, Peter ; Andrieu-Brunsen, Annette (2019):
Insights into the interplay of wetting and transport in mesoporous silica films.
In: Journal of Colloid and Interface Science, (Online First), ISSN 00219797, DOI: 10.1016/j.jcis.2019.09.093,
[Online-Edition: https://doi.org/10.1016/j.jcis.2019.09.093],
[Artikel]

Bühler, Johannes ; Leichtfuß, Sebastian ; Schiffer, Heinz-Peter ; Lischer, Thomas ; Raabe, Simon (2019):
Surge Limit Prediction for Automotive Air-Charged Systems.
4, In: International Journal of Turbomachinery, Propulsion and Power, (4), Molecular Diversity Preservation International (MDPI), S. 34, ISSN 2504-186X, DOI: 10.3390/ijtpp4040034,
[Online-Edition: https://doi.org/10.3390/ijtpp4040034],
[Artikel]

Großmann, A. ; Gosmann, J. ; Mittelstedt, C. (2019):
Lightweight lattice structures in selective laser melting: Design, fabrication and mechanical properties.
766, In: Materials Science and Engineering: A, S. 138356, ISSN 09215093, DOI: 10.1016/j.msea.2019.138356,
[Artikel]

Kreß, Antonio ; Lieb, Nicole ; Lorenz, Verena ; Metternich, Joachim (2019):
Kompetenzorientierte Gestaltung mobiler Lernfabrikmodule bei der DB Netz AG.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (10), Carl Hanser Verlag, München, S. 631-634, ISSN 0947-0085, DOI: 10.3139/104.112169,
[Artikel]

Suckow, Timon ; Günzel, Janosch ; Schell, Lukas ; Sellner, Erik ; Dagnew, Jonathan ; Groche, Peter (2019):
Temperatureinfluss in der Aluminium-Blechumformung - Rückfederungsverhalten und Prozessgrenzen beim Gesenkbiegen von EN AW-6082 und EN AW-7075.
10, In: Werkstattstechnik online: wt, Springer VDI Verlag, Düsseldorf, S. 733-739, ISSN 1436-4980, [Artikel]

Viehmann, Andreas ; Schleiffer, J.-E. ; König, Ruben ; Rinderknecht, Stephan (2019):
Innovatives Antriebskonzept für das smarte Fahrzeug der Zukunft.
Volume 121, In: ATZ - Automobiltechnische Zeitschrift, (Oktober 2019), Springer Verlag, S. 74-79, [Online-Edition: https://doi.org/10.1007/s35148-019-0121-0],
[Artikel]

Baumann, Sebastian ; Klingauf, Uwe (2019):
Modeling of aircraft fuel consumption using machine learning algorithms.
In: CEAS Aeronautical Journal, Springer, ISSN 1869-5590, DOI: 10.1007/s13272-019-00422-0,
[Artikel]

Wei, Nathaniel J. ; Kissing, Johannes ; Tropea, Cameron (2019):
Generation of periodic gusts with a pitching and plunging airfoil.
60, In: Experiments in Fluids, (11), Springer, S. 166, ISSN 0723-4864, DOI: 10.1007/s00348-019-2815-1,
[Online-Edition: https://doi.org/10.1007/s00348-019-2815-1],
[Artikel]

Budakli, Mete ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2019):
Gas-driven thin liquid films: Effect of interfacial shear on the film waviness and convective heat transfer.
146, In: International Journal of Thermal Sciences, Elsevier, S. 106077, ISSN 1290-0729, e-ISSN 1778-4166, DOI: 10.1016/j.ijthermalsci.2019.106077,
[Online-Edition: https://doi.org/10.1016/j.ijthermalsci.2019.106077],
[Artikel]

Dahl, E. ; Becker, J. S. ; Mittelstedt, C. ; Schürmann, H. (2019):
A new concept for a modular composite pressure vessel design.
124, In: Composites Part A: Applied Science and Manufacturing, Elsevier, S. 105475, ISSN 1359835X, DOI: 10.1016/j.compositesa.2019.105475,
[Online-Edition: https://doi.org/10.1016/j.compositesa.2019.105475],
[Artikel]

Tripathi, Gaurav ; Sharma, Priybrat ; Dhar, Atul ; Sadiki, Amsini (2019):
Computational investigation of diesel injection strategies in hydrogen-diesel dual fuel engine.
36, In: Sustainable Energy Technologies and Assessments, 2019, Elsevier, S. 100543, ISSN 22131388, DOI: 10.1016/j.seta.2019.100543,
[Online-Edition: https://doi.org/10.1016/j.seta.2019.100543],
[Artikel]

Schwehr, Julian ; Luthardt, Stefan ; Dang, Hien ; Henzel, Maren ; Winner, Hermann ; Adamy, Jürgen ; Fürnkranz, Johannes ; Willert, Volker ; Lattke, Benedikt ; Höpfl, Maximilian ; Wannemacher, Christoph (2019):
The PRORETA 4 City Assistant System.
67, In: Automatisierungstechnik, (9), De Gruyter, S. 783-798, ISSN 2196-677X ; Druckausg.: 0178-2312, DOI: 10.1515/auto-2019-0051,
[Online-Edition: https://www1.rmr.tu-darmstadt.de/pdf/proreta4-2019.pdf],
[Artikel]

Ding, Carl-Philipp ; Vuilleumier, David ; Kim, Namho ; Reuss, David L. ; Sjöberg, Magnus ; Böhm, Benjamin (2019):
Effect of engine conditions and injection timing on piston-top fuel films for stratified direct-injection spark-ignition operation using E30.
In: International Journal of Engine Research, Sage, S. 146808741986978, ISSN 1468-0874, DOI: 10.1177/1468087419869785,
[Online-Edition: https://doi.org/10.1177/1468087419869785],
[Artikel]

Klein, M. ; Herbert, A. ; Kosaka, H. ; Böhm, B. ; Dreizler, A. ; Chakraborty, N. ; Papapostolou, V. ; Im, H. G. ; Hasslberger, J. (2019):
Evaluation of Flame Area Based on Detailed Chemistry DNS of Premixed Turbulent Hydrogen-Air Flames in Different Regimes of Combustion.
In: Flow, Turbulence and Combustion, Springer Science+Business Media B.V., S. 1-17, ISSN 1573-1987, DOI: 10.1007/s10494-019-00068-2,
[Online-Edition: https://doi.org/10.1007/s10494-019-00068-2],
[Artikel]

Bruder, Ralph (2019):
Arbeitswissenschaftliche Betrachtung von Interaktionsarbeit.
In: Arbeiten mit Menschen - Interaktionsarbeit, ver.di - Vereinte Dienstleistungsgewerkschaft Bereich Innovation und Gute Arbeit, S. 105-106, [Artikel]

Dillen, Sebastian ; Oberlack, Martin ; Wang, Yongqi (2019):
Analytical investigation of rotationally symmetrical oscillating flows of viscoelastic fluids.
272, In: Journal of Non-Newtonian Fluid Mechanics, Elsevier, S. 104168, ISSN 03770257, DOI: 10.1016/j.jnnfm.2019.104168,
[Online-Edition: https://doi.org/10.1016/j.jnnfm.2019.104168],
[Artikel]

Hartl, S. ; Messig, D. ; Fuest, F. ; Hasse, C. (2019):
Flame Structure Analysis and Flamelet/Progress Variable Modelling of DME/Air Flames with Different Degrees of Premixing.
102, In: Flow, Turbulence and Combustion, (3), Springer, S. 757-773, ISSN 1386-6184, DOI: 10.1007/s10494-018-9981-8,
[Online-Edition: https://doi.org/10.1007/s10494-018-9981-8],
[Artikel]

Hirmer, Katrin ; Bodenstein, Christina ; Sauer, Hans Martin ; Dörsam, Edgar ; Hofmann, Klaus (2019):
Nonlinear behavior in electrical properties of fully screen printed electroluminescent panels.
8, In: Journal of Print and Media Technology Research, (3), Iarigai, S. 145-154, ISSN 2414-6250, DOI: 10.14622/JPMTR-1905,
[Online-Edition: https://iarigai.com/publications/journals/3-2019/],
[Artikel]

Peter, Nicolas J. ; Gerlitzky, Christiane ; Altin, Abdulrahman ; Wohletz, Simon ; Krieger, Waldemar ; Hai Tran, The ; Liebscher, Christian H. ; Scheu, Christina ; Dehm, Gerhard ; Groche, Peter ; Erbe, Andreas (2019):
Atomic level bonding mechanism in steel/aluminum joints produced by cold pressure welding.
7, In: Materialia, Elsevier Science Publishing, S. 100396, ISSN 2589-1529, DOI: 10.1016/j.mtla.2019.100396,
[Artikel]

Scholtissek, A. ; Domingo, P. ; Vervisch, L. ; Hasse, C. (2019):
A self-contained composition space solution method for strained and curved premixed flamelets.
207, In: Combustion and Flame, Elsevier, S. 342-355, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.06.010,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2019.06.010],
[Artikel]

Wagner, Maximilian ; Weigold, Matthias ; Hamm, Christoph ; Michels, Heiner ; Appelt, Michael ; Röser, Thomas (2019):
Eisenaluminide als Substitutionswerkstoff in der Luft- und Raumfahrt – Erste Erkenntnisse zur spanenden Bearbeitung.
In: Fertigung, [Online-Edition: https://www.fertigung.de/news/aus-der-branche/eisenaluminide...],
[Artikel]

Weis, Patrick ; Großmann, A. ; Clemen, Christof ; Mittelstedt, C. (2019):
Optimization and Re-Design of a Metallic Riveting Tool for Selective Laser Melting - A Case Study.
In: Additive Manufacturing, 2019, S. 100892, ISSN 2214-8604, DOI: 10.1016/j.addma.2019.100892,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S2214860419...],
[Artikel]

Leichtfuß, Sebastian ; Bühler, Johannes ; Schiffer, Heinz-Peter ; Peters, Patrick ; Hanna, Michael (2019):
A Casing Treatment with Axial Grooves for Centrifugal Compressors.
4, In: International Journal of Turbomachinery, Propulsion and Power, (3), MDPI, S. 27, ISSN 2504-186X, DOI: 10.3390/ijtpp4030027,
[Online-Edition: https://www.mdpi.com/2504-186X/4/3/27],
[Artikel]

Heß, Julian ; Tai, Yih-Chin ; Wang, Yongqi (2019):
Debris flows with pore pressure and intergranular friction on rugged topography.
190, In: Computers & Fluids, S. 139-155, ISSN 00457930, DOI: 10.1016/j.compfluid.2019.06.015,
[Online-Edition: https://doi.org/10.1016/j.compfluid.2019.06.015],
[Artikel]

Herold, Maximilian ; Lippert, Moritz ; Müller, Matthias ; Neumann, Wolfgang (2019):
Wichtige Impulse. Auswirkungen von vertikalen Beschleunigungen bei der horizontalen Ladungssicherungsprüfung.
In: Sichere Ladung, ecomed, [Online-Edition: https://www.ecomed-storck.de/Ladungssicherung-Logistik/Ladun...],
[Artikel]

Herold, Maximilian ; Lippert, Moritz ; Neumann, Wolfgang (2019):
Der Anfang der Ladungssicherung.
In: Gefährliche Ladung, (E-paper Nr. 9), ecomed-Storck GmbH, ISSN 0016-5808, [Artikel]

Beetz, Jean-Paul ; Kirchner, Eckhard (2019):
Das Wirkraummodell ‐ Ein Hilfsmittel bei der Gestaltung sauberkeitsrelevanter Produkte.
In: Forschung im Ingenieurwesen, (Online First), Springer, ISSN 1434-0860, DOI: 10.1007/s10010-019-00375-0,
[Artikel]

Amersbach, Christian ; Winner, Hermann (2019):
Functional decomposition—A contribution to overcome the parameter space explosion during validation of highly automated driving.
In: Traffic Injury Prevention, (20), S. 52-57, DOI: 10.1080/15389588.2019.1624732,
[Online-Edition: https://doi.org/10.1080/15389588.2019.1624732],
[Artikel]

Maldonado, D.J.G. ; Karev, Artem ; Hagedorn, Peter ; Ritto, T.G. ; Sampaio, Rubens (2019):
Analysis of a rotordynamic system with anisotropy and nonlinearity using the Floquet theory and the method of normal forms.
453, In: Journal of Sound and Vibration, S. 201-213, ISSN 0022-460X, DOI: 10.1016/j.jsv.2019.04.006,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S0022460X1...],
[Artikel]

Gerlitzky, Christiane ; Kuhn, C. ; Groche, Peter ; Tran, T.H. ; Zhang, S. ; Peter, N. J. ; Rohwerder, M. (2019):
3D cold pressure welded components – From the bonding mechanisms to the production of high strength joints.
50, In: Material Science & Engineering Technology, Wiley, S. 913-923, DOI: 10.1002/mawe.201900101,
[Artikel]

Han, W. ; Scholtissek, A. ; Dietzsch, F. ; Jahanbakhshi, R. ; Hasse, C. (2019):
Influence of flow topology and scalar structure on flame-tangential diffusion in turbulent non-premixed combustion.
206, In: Combustion and Flame, Elsevier, S. 21-36, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.04.038,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2019.04.038],
[Artikel]

Nienhaus, Vinzenz ; Smith, Kevin ; Spiehl, Dieter ; Dörsam, Edgar (2019):
Investigations on nozzle geometry in fused filament fabrication.
28, In: Additive Manufacturing, (13), Elsevier, S. 711-718, ISSN 2214-8604, DOI: 10.1016/j.addma.2019.06.019,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S221486041...],
[Artikel]

Popp, S. ; Kuenne, G. ; Janicka, J. ; Hasse, C. (2019):
An extended artificial thickening approach for strained premixed flames.
206, In: Combustion and Flame, Elsevier, S. 252-265, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.04.047,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2019.04.047],
[Artikel]

Schulte, Fiona ; Kirchner, Eckhard ; Kloberdanz, Hermann (2019):
Analysis and Synthesis of Resilient Load-Carrying Systems.
1, In: Proceedings of the Design Society: International Conference on Engineering Design, (1), Cambridge University Press, S. 1403-1412, ISSN 2220-4342, DOI: 10.1017/dsi.2019.146,
[Online-Edition: https://www.cambridge.org/core/journals/proceedings-of-the-i...],
[Artikel]

Li, D. ; Marchisio, D. ; Hasse, C. ; Lucas, D. (2019):
Comparison of Eulerian QBMM and classical Eulerian–Eulerian method for the simulation of polydisperse bubbly flows.
65, In: AIChE Journal, (11), S. e16732, DOI: 10.1002/aic.16732,
[Online-Edition: https://aiche.onlinelibrary.wiley.com/doi/abs/10.1002/aic.16...],
[Artikel]

Zimmermann, Matthias ; Heinz, Michael ; Sielaff, Axel ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2019):
Influence of System Pressure on Pool Boiling Regimes on a Microstructured Surface Compared to a Smooth Surface.
In: Experimental Heat Transfer, Taylor & Francis, ISSN 0891-6152, DOI: 10.1080/08916152.2019.1635228,
[Artikel]

Kumar, Abhijeet ; Kleinen, Jochen ; Venzmer, Joachim ; Trybała, Anna ; Starov, Victor ; Gambaryan-Roisman, Tatiana (2019):
Spreading and Imbibition of Vesicle Dispersion Droplets on Porous Substrates.
3, In: Colloids and Interfaces, (3), S. 53, ISSN 2504-5377, DOI: 10.3390/colloids3030053,
[Artikel]

Löwe, Jens-Michael ; Plog, Jevon ; Jiang, Yizhou ; Pan, Yayue ; Yarin, Alexander L. (2019):
Drop deposition affected by electrowetting in direct ink writing process.
126, In: Journal of Applied Physics, (3), AIP Publishing, ISSN 00218979, DOI: 10.1063/1.5109385,
[Artikel]

Geisenhofer, Markus ; Kummer, Florian ; Müller, Björn (2019):
A discontinuous Galerkin immersed boundary solver for compressible flows: Adaptive local time stepping for artificial viscosity based shock‐capturing on cut cells.
91, In: International Journal for Numerical Methods in Fluids, Wiley-Blackwell, S. 448-472, ISSN 0271-2091, DOI: 10.1002/fld.4761,
[Online-Edition: https://doi.org/10.1002/fld.4761],
[Artikel]

Bodenstein, Christina ; Sauer, Hans Martin ; Hirmer, Katrin ; Dörsam, Edgar (2019):
Printing process and characterization of fully pad printed electroluminescent panels on curved surfaces.
16, In: Journal of Coatings Technology and Research, 2019, (6), Springer US, S. 1673-1681, ISSN 1547-0091, DOI: 10.1007/s11998-019-00243-0,
[Online-Edition: https://doi.org/10.1007/s11998-019-00243-0],
[Artikel]

Großmann, A. ; Mittelstedt, C. (2019):
Lightweight construction with two-dimensional cellular solids in additive manufacturing.
18, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), Wiley, ISSN 1617-7061, DOI: 10.1002/pamm.201800007,
[Artikel]

Mittelstedt, C. ; Becker, W. (2019):
Asymptotic analysis of free-edge and free-corner effects in laminate structures.
5, In: Proceedings in Applied Mathematics and Mechanics (PAMM), (1), Wiley, S. 251-252, ISSN 1617-7061, DOI: 10.1002/pamm.200510102,
[Artikel]

Schnabel, J. ; Mittelstedt, C. (2019):
Efficient analysis of stress concentrations in laminated composite structures with geometric discontinuities.
18, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), Wiley, S. 1-2, ISSN 1617-7061, DOI: 10.1002/pamm.201800046,
[Artikel]

Stamm, Jacqueline ; Daume, Dominik ; Hartwig, Tobias ; Oschmann, Maximilian ; Schäfer, Julian ; Sauer, Hans Martin ; Dörsam, Edgar (2019):
Dynamic interferometric imaging of the thickness distribution of evaporating thin liquid films.
16, In: Journal of Coatings Technology and Research, (6), S. 1663-1671, ISSN 1935-3804, DOI: 10.1007/s11998-019-00236-z,
[Online-Edition: https://doi.org/10.1007/s11998-019-00236-z],
[Artikel]

Ashihmin, Alexander ; Piskunov, Maxim ; Roisman, Ilia ; Yanovsky, Vycheslav (2019):
Thermal stability control of the water-in-diesel microemulsion fuel produced by using a nonionic surfactant combined with aliphatic alcohols.
In: Journal of Dispersion Science and Technology, Taylor & Francis online, S. 1-8, ISSN 0193-2691, DOI: 10.1080/01932691.2019.1634583,
[Online-Edition: https://doi.org/10.1080/01932691.2019.1634583],
[Artikel]

Plog, Jevon ; Löwe, Jens-Michael ; Jiang, Yizhou ; Pan, Yayue ; Yarin, Alexander L. (2019):
Control of Direct Writing of Ink Droplets using Electrowetting.
In: Langmuir, DOI: 10.1021/acs.langmuir.9b01061,
[Online-Edition: https://doi.org/10.1021/acs.langmuir.9b01061],
[Artikel]

Thiem, Mikula ; Hummel, Nicolas ; Beidl, Christian (2019):
Betriebsbedingungen für Systeme zur Abgasnachbehandlung im hybridisierten Nutzfahrzeug.
80, In: MTZ - Motortechnische Zeitschrift, (7-8), Springer, S. 94-101, ISSN 2192-8843, DOI: 10.1007/s35146-019-0087-1,
[Artikel]

Jesch, David ; Bevrnja, Alija ; di Mare, Francesca ; Janicka, Johannes ; Sadiki, Amsini (2019):
Large eddy simulation of a turbulent flame using tabulated chemistry with a novel multivariate PDF.
In: International Journal of Computational Fluid Dynamics, S. 1-21, ISSN 1061-8562, DOI: 10.1080/10618562.2019.1640359,
[Online-Edition: https://doi.org/10.1080/10618562.2019.1640359],
[Artikel]

Nishad, Kaushal ; Ries, Florian ; Li, Yongxiang ; Sadiki, Amsini (2019):
Numerical Investigation of Flow through a Valve during Charge Intake in a DISI -Engine Using Large Eddy Simulation.
12, In: Energies, (13), MDPI, S. 2620, ISSN 1996-1073, DOI: 10.3390/en12132620,
[Online-Edition: https://doi.org/10.3390/en12132620],
[Artikel]

Nishad, Kaushal ; Stein, Marcus ; Ries, Florian ; Bykov, Viatcheslav ; Maas, Ulrich ; Deutschmann, Olaf ; Janicka, Johannes ; Sadiki, Amsini (2019):
Thermal Decomposition of a Single AdBlue® Droplet Including Wall–Film Formation in Turbulent Cross-Flow in an SCR System.
12, In: Energies, (13), MDPI, S. 2600, ISSN 1996-1073, DOI: 10.3390/en12132600,
[Online-Edition: https://doi.org/10.3390/en12132600],
[Artikel]

Reichwein, Jannik ; Kaspar, Jerome ; Vielhaber, Michael ; Kirchner, Eckhard (2019):
Exploitation of AM-Potentials by Linking Manufacturing Processes to Function-Driven Product Design.
1, In: Proceedings of the Design Society: International Conference on Engineering Design, (1), Cambridge University Press, S. 739-748, ISSN 2220-4342, DOI: 10.1017/dsi.2019.78,
[Online-Edition: https://www.cambridge.org/core/journals/proceedings-of-the-i...],
[Artikel]

Rieks, Sebastian ; Wende, Marc ; Preußer, Niklas ; Gambaryan-Roisman, Tatiana ; Kenig, Eugeny Y. (2019):
A hydrodynamic analogy based modelling approach for zero-gravity distillation with metal foams.
147, In: Chemical Engineering Research and Design, Elsevier, S. 615-623, ISSN 02638762, DOI: 10.1016/j.cherd.2019.05.022,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0263876219...],
[Artikel]

Rinderknecht, Stephan ; Viehmann, Andreas ; Eßer, Arved ; Langhammer, Felix (2019):
Dedizierte Hybridantriebe für eine ökoeffiziente und langstreckentaugliche Mobilität der Zukunft.
In: eMobilJournal, (Juli 2019), InnoTech Medien GmbH, ISSN 2568-213X, [Online-Edition: https://www.emobilserver.de/emobil-exklusiv/1818-dedizierte-...],
[Artikel]

Sacomano Filho, F. L. ; Krieger Filho, G. C. ; van Oijen, J. A. ; Sadiki, A. ; Janicka, J. (2019):
A novel strategy to accurately represent the carrier gas properties of droplets evaporating in a combustion environment.
In: International Journal of Heat and Mass Transfer, (137), S. 1141-1153, ISSN 0017-9310, DOI: 10.1016/j.ijheatmasstransfer.2019.03.164,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0017931018...],
[Artikel]

Schork, Stefan ; Kirchner, Eckhard (2019):
Purpose-Oriented Modelling of the Learning Process When Using Prototypes.
1, In: Proceedings of the Design Society: International Conference on Engineering Design, (1), Cambridge University Press, S. 1573-1582, ISSN 2220-4342, DOI: 10.1017/dsi.2019.163,
[Online-Edition: https://www.cambridge.org/core/journals/proceedings-of-the-i...],
[Artikel]

Vogel, Sven ; Kirchner, Eckhard (2019):
Simple Integration of Sensory Functions.
1, In: Proceedings of the Design Society: International Conference on Engineering Design, (1), Cambridge University Press, S. 3711-3720, ISSN 2220-4342, DOI: 10.1017/dsi.2019.378,
[Online-Edition: https://www.cambridge.org/core/journals/proceedings-of-the-i...],
[Artikel]

Wen, X. ; Rieth, M. ; Scholtissek, A. ; Stein, O. T. ; Wang, H. ; Luo, K. ; Kempf, A. M. ; Kronenburg, A. ; Fan, J. ; Hasse, C. (2019):
A comprehensive study of flamelet tabulation methods for pulverized coal combustion in a turbulent mixing layer — Part I: A priori and budget analyses.
In: Combustion and Flame, Elsevier, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.05.046,
[Artikel]

Traub, Tilman ; Güngör, Burcu ; Groche, Peter (2019):
Measures towards roll forming at the physical limit of energy consumption.
2019, In: The International Journal of Advanced Manufacturing Technology, Springer, S. 1-13, ISSN 1433-3015, DOI: 10.1007/s00170-019-03992-9,
[Online-Edition: https://doi.org/10.1007/s00170-019-03992-9],
[Artikel]

Sadeghi, Arman ; Azari, Milad ; Hardt, Steffen (2019):
Electroosmotic flow in soft microchannels at high grafting densities.
4, In: Physical Review Fluids, (6), American Physical Society (APS), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.4.063701,
[Online-Edition: https://doi.org/10.1103/PhysRevFluids.4.063701],
[Artikel]

Hell, Sascha ; Becker, Wilfried (2019):
An Enriched Scaled Boundary Finite Element Method for 3D Cracks.
215, In: Engineering Fracture Mechanics, Elsevier, S. 272-293, ISSN 0013-7944, DOI: 10.1016/j.engfracmech.2019.04.032,
[Artikel]

Thiem, Mikula ; Hummel, Nicolas ; Beidl, Christian (2019):
Betriebsbedingungen für Systeme zur Abgasnachbehandlung im hybridisierten Nutzfahrzeug.
12, In: ATZheavy duty, (2), Springer Fachmedien Wiesbaden, S. 62-70, ISSN 2524-8782, DOI: 10.1007/s35746-019-0025-7,
[Artikel]

Altherr, Lena C. ; Leise, Philipp ; Pfetsch, Marc E. ; Schmitt, Andreas (2019):
Resilient layout, design and operation of energy-efficient water distribution networks for high-rise buildings using MINLP.
20, In: Optimization and Engineering, (2), Springer US, S. 605-645, ISSN 1389-4420, DOI: 10.1007/s11081-019-09423-8,
[Online-Edition: https://doi.org/10.1007/s11081-019-09423-8],
[Artikel]

Hoche, Holger ; Balser, Adrian ; Oechsner, Matthias ; Franceschi, Alessandro ; Groche, Peter (2019):
Verbesserung des Eigenspannungszustands beim Kaltfließpressen durch den aktiven Einsatz eines gesteuerten Gegenstempels.
50, In: Material Science and Engineering Technology, (6), Wiley, S. 669-681, ISSN 0049-8688; 0933-5137, [Online-Edition: https://doi.org/10.1002/mawe.201900050],
[Artikel]

Van Harselaar, Wilco ; Schreuders, Niels ; Hofman, Theo ; Rinderknecht, Stephan (2019):
Improved Implementation of Dynamic Programming on the Example of Hybrid Electric Vehicle Control.
52, In: IFAC-PapersOnLine, (5), Elsevier, S. 147-152, ISSN 1474-6670; 2405-8963, DOI: 10.1016/j.ifacol.2019.09.024,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S240589631...],
[Artikel]

Karev, Artem ; Harzheim, Lothar ; Immel, Rainer ; Erzgräber, Matthias (2019):
Free sizing optimization of a front hood using the ESL method: overcoming challenges and traps.
In: Structural and Multidisciplinary Optimization, Springer Berlin Heidelberg, S. 1-21, ISSN 1615-1488, DOI: 10.1007/s00158-019-02285-9,
[Online-Edition: https://doi.org/10.1007/s00158-019-02285-9],
[Artikel]

Debiagi, P. ; Heuer, S. ; Ontyd, C. ; Schiemann, M. ; Faravelli, T. ; Hasse, C. ; Scherer, V. (2019):
Differences in Formation and Oxidation of Colombian Coal Chars in Air and Oxy-fuel Atmospheres.
74, In: CHEMICAL ENGINEERING TRANSACTIONS, The Italian Association of Chemical Engineering, S. 151-156, ISSN 2283-9216, DOI: 10.3303/CET1974026,
[Online-Edition: https://doi.org/10.3303/CET1974026],
[Artikel]

Sinn, Nico ; Schür, Maximilian T. ; Hardt, Steffen (2019):
No-contact electrostatic manipulation of droplets on liquid-infused surfaces: Experiments and numerical simulations.
114, In: Applied Physics Letters, (21), S. 213704, ISSN 0003-6951, DOI: 10.1063/1.5091836,
[Online-Edition: https://doi.org/10.1063/1.5091836],
[Artikel]

Traub, Tilman ; Sellner, Erik ; Eiermann, Jonas ; Groche, Peter (2019):
Durch Kooperation zur Win-Win-Win Situation.
2019, In: Technik & Mensch, VMK, Verl. für Marketing und Kommunikation, S. 8-9, ISSN 1611-5546, [Artikel]

Ehehalt, Ulrich ; Alber, Oliver ; Markert, Richard ; Wegener, Georg (2019):
Experimental observations on rotor-to-stator contact.
446, In: Journal of Sound and Vibration, S. 453-467, ISSN 0022-460X, DOI: 10.1016/j.jsv.2019.01.008,
[Online-Edition: https://doi.org/10.1016/j.jsv.2019.01.008],
[Artikel]

Fedorova, Nataliia ; Aziziyanesfahani, Pegah ; Jovicic, Vojislav ; Zbogar-Rasic, Ana ; Jehanzaib Khan, Muhammad ; Delgado, Antonio (2019):
Investigation of the Concepts to Increase the Dew Point Temperature for Thermal Energy Recovery from Flue Gas, Using Aspen ®.
12, In: Energies, (1585), Molecular Diversity Preservation International (MDPI), S. 1-17, ISSN 1996-1073, DOI: 10.3390/en12091585,
[Online-Edition: https://www.mdpi.com/1996-1073/12/9/1585/pdf],
[Artikel]

Heinze, Christian ; May, Jan ; Peters, Jens ; Ströhle, Jochen ; Epple, Bernd (2019):
Techno-economic assessment of polygeneration based on fluidized bed gasification.
250, In: Fuel, Elsevier, S. 285-291, ISSN 0016-2361, DOI: 10.1016/j.fuel.2019.04.020,
[Artikel]

Cloos, F.-J. ; Pelz, P. F. (2019):
Experimental Investigation of the Swirl Development at the Inlet of a Coaxial Rotating Diffuser or Nozzle.
141, In: Journal of Fluids Engineering, ASME, S. 041107, ISSN 0098-2202, DOI: 10.1115/1.4042095,
[Online-Edition: http://fluidsengineering.asmedigitalcollection.asme.org/arti...],
[Artikel]

Groche, Peter ; Storbeck, Martin ; Wang, Tianbo (2019):
Continuous forming of height-variable profiles by flexible roller beading.
103, In: The International Journal of Advanced Manufacturing Technology, Springer, S. 2649-2663, ISSN 1433-3015, DOI: 10.1007/s00170-019-03670-w,
[Artikel]

Hermann, J. ; Greifenstein, M. ; Boehm, B. ; Dreizler, A. (2019):
Experimental Investigation of Global Combustion Characteristics in an Effusion Cooled Single Sector Model Gas Turbine Combustor.
102, In: Flow, Turbulence and Combustion, (4), Springer Science+Business Media B.V., S. 1025-1052, ISSN 1573-1987, DOI: 10.1007/s10494-018-9999-y,
[Online-Edition: https://doi.org/10.1007/s10494-018-9999-y],
[Artikel]

Groche, Peter ; Christiany, Matthias ; Wu, Yutian (2019):
Load-dependent wear in sheet metal forming.
422/423, In: Wear, Elsevier, S. 252-260, ISSN 0043-1648, [Online-Edition: https://doi.org/10.1016/j.wear.2019.01.071],
[Artikel]

Niessen, Pia (2019):
Organisationale Resilienz im Sanierungsfall bewerten.
63, In: Controlling & Management Review, (2), Springer Fachmedien Wiesbaden, S. 54-57, ISSN 2195-8262, DOI: 10.1007/s12176-019-0004-y,
[Online-Edition: http://link.springer.com/article/10.1007/s12176-019-0004-y],
[Artikel]

Jardin, Philippe ; Eßer, Arved ; Givone, S. ; Eichenlaub, Tobias ; Schleiffer, J.-E. ; Rinderknecht, Stephan (2019):
The Sensitivity in Consumption of Different Vehicle Drivetrain Concepts Under Varying Operating Conditions: A Simulative Data Driven Approach.
In: Vehicles — Open Access Journal from MDPI, [Online-Edition: https://www.mdpi.com/journal/vehicles],
[Artikel]

Bodenstein, Christina ; Sauer, Hans Martin ; Fernandes, Felipe ; Dörsam, Edgar (2019):
Assessing and improving edge roughness in pad-printing by using outlines in a one-step exposure process for the printing form.
8, In: Journal of Print and Media Technology Research (JPMTR), (1), The International Association of Research Organizations for the Information, Media and Graphic Arts Industries, S. 19-27, ISSN 2414-6250 (Online) 2223-8905 (Print), [Artikel]

Friesen, John ; Hannes, Taubenböck ; Wurm, Michael ; Pelz, P. F. (2019):
Size distributions of slums across the globe using different data and classification.
In: European Journal of Remote Sensing, DOI: 10.1080/22797254.2019.1579617,
[Online-Edition: https://www.tandfonline.com/doi/full/10.1080/22797254.2019.1...],
[Artikel]

Li, D. ; Li, Z. ; Gao, Z. (2019):
Quadrature-based moment methods for the population balance equation: An algorithm review.
27, In: Chinese Journal of Chemical Engineering, (3), S. 483 - 500, ISSN 1004-9541, DOI: 10.1016/j.cjche.2018.11.028,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S1004954118...],
[Artikel]

Groche, Peter ; Gerlitzky, Christiane ; Niessen, Benedikt (2019):
Hochgeschwindigkeitsfügen bei niedrigen Energien.
In: Blechnet, [Online-Edition: https://www.blechnet.com/hochgeschwindigkeitsfuegen-bei-nied...],
[Artikel]

Junietz, Philipp ; Steininger, Udo ; Winner, Hermann (2019):
Macroscopic Safety Requirements for Highly Automated Driving.
2673, In: Transportation Research Record, (3), Sage, S. 1-10, ISSN 2169-4052; 0361-1981, DOI: 10.1177/0361198119827910,
[Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8656],
[Artikel]

Shen, Ye ; Viehmann, Andreas ; Rinderknecht, Stephan (2019):
Investigation of the power losses of the hybrid transmission DE-REX based on modeling and measurement.
1-12, In: Journal of Automobile Engineering, DOI: 10.1177/0954407019829655,
[Online-Edition: https://journals.sagepub.com/home/pid],
[Artikel]

Seiler, Patrick M. ; Gloerfeld, Mark ; Roisman, Ilia V. ; Tropea, Cameron (2019):
Aerodynamically driven motion of a wall-bounded drop on a smooth solid substrate.
4, In: Physical Review Fluids, (2), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.4.024001,
[Online-Edition: https://doi.org/10.1103/PhysRevFluids.4.024001],
[Artikel]

Katz, J. ; Klimach, M. ; Haupt, F. ; Brechtel, A. ; Mittelstedt, C. (2019):
Structural optimization and experimental investigation of CFRP lock nuts.
In: Composites Part A — Applied Science and Manufacturing, (117), Elsevier, S. 156-168, ISSN 1359-835X, DOI: 10.1016/j.compositesa.2018.11.004,
[Artikel]

Pelz, P. F. ; Friesen, John ; Hartig, Jakob (2019):
Similar size of slums caused by a Turing instability of migration behavior.
99, In: Physical Review E, American Physical Society, S. 022302, DOI: 10.1103/PhysRevE.99.022302,
[Online-Edition: https://link.aps.org/doi/10.1103/PhysRevE.99.022302],
[Artikel]

Zöller, Chris ; Wagner, Paul ; Winner, Hermann (2019):
Tires and vertical dynamics of wheeled mobile driving simulators.
61, In: Transportation research part F: traffic psychology and behaviour, Elsevier, S. 69-83, DOI: 10.1016/j.trf.2017.09.009,
[Online-Edition: https://doi.org/10.1016/j.trf.2017.09.009],
[Artikel]

Ries, F. ; Yongxiang, L. ; Nishad, K. ; Janicka, J. ; Sadiki, A. (2019):
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
21, In: Entropy, (2), MDPI, S. 129, ISSN 1099-4300, DOI: 10.3390/e21020129,
[Artikel]

Karev, Artem ; Hagedorn, Peter (2019):
Global stability effects of parametric excitation.
448, In: Journal of Sound and Vibration, S. 34 - 52, ISSN 0022-460X, DOI: 10.1016/j.jsv.2019.02.014,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0022460X19...],
[Artikel]

Liu, Zhihong ; Shen, Ye ; Rinderknecht, Stephan (2019):
Theoretical and Experimental Investigation on Power Loss of Vehicle Transmission Synchronizers with Spray Lubrication.
In: SAE Technical Paper, SAE International, ISSN 0148-7191, DOI: 10.4271/2019-01-0028,
[Online-Edition: https://saemobilus.sae.org/content/2019-01-0028],
[Artikel]

Jaeger, Jeannine ; Groher, Florian ; Stamm, Jacqueline ; Spiehl, Dieter ; Braun, Johannes ; Dörsam, Edgar ; Suess, Beatrix (2019):
Characterization and Inkjet Printing of an RNA Aptamer for Paper-Based Biosensing of Ciprofloxacin.
9, In: Biosensors, (1), S. E7, ISSN 2079-6374, DOI: 10.3390/bios9010007,
[Artikel]

Bruder, Ralph ; Spanner-Ulmer, Birgit (2019):
Zusammenarbeit von Mensch und Technik im Medienbereich.
16, In: Medien Wirtschaft, (1), New Business Verlag, S. 25-31, ISSN 1613-0669, [Online-Edition: https://www.medienwirtschaft-online.de/inhalt/index.php?rubr...],
[Artikel]

Heimrich, Felix ; Kohler, Michael ; Kristl, Lisa (2019):
Nonparametric estimation of time-dependent quantiles in a simulation model.
30, In: Statistica Sinica, S. 1-17, ISSN 1017-0405, [Artikel]

Heß, Julian ; Wang, Yongqi (2019):
On the role of pore-fluid pressure evolution and hypoplasticity in debris flows.
74, In: European Journal of Mechanics - B/Fluids, S. 363-379, ISSN 09977546, DOI: 10.1016/j.euromechflu.2018.09.005,
[Online-Edition: https://doi.org/10.1016/j.euromechflu.2018.09.005],
[Artikel]

Rönick, Katharina ; Stockinger, Christopher (2019):
Gestaltung für den Mitarbeiter – Akzeptanz als Voraussetzung in der Arbeitswelt 4.0.
In: Arbeiten in der digital vernetzten Welt, (11), Begleitforschung Mittelstand-Digital, ISSN 2198-8544, [Artikel]

Talmon l'Armée, Andreas ; Becker, Wilfried (2019):
Coupled stress and energy criterion for composite failure: Pointwise versus averaged evaluation of the stress criterion.
In: Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2018.1519618,
[Artikel]

Abele, Eberhard ; Scherer, Timo ; Geßner, Felix ; Weigold, Matthias (2019):
Einbringen von Gewinden in SLM-Bauteile – Strategie zur prozesssicheren Gewindefertigung in additiv gefertigten Komponenten.
109, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 24-29, ISSN 1436-4980, [Artikel]

Ali, Fares ; Birk, Frederik ; Öztürk, Tuğrul ; Abele, Eberhard ; Weigold, Matthias (2019):
Hybrider Leichtbau in Werkzeugmaschinen: Untersuchung des dynamischen Verhaltens von CFK-Mineralguss-Hybrid-Bauweisen.
109, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 67-71, ISSN 1436-4980, [Artikel]

Antritter, Thomas ; Hachmann, Peter ; Gambaryan-Roisman, Tatiana ; Buck, Bernhard ; Stephan, Peter (2019):
Spreading of Micrometer-Sized Droplets under the Influence of Insoluble and Soluble Surfactants: A Numerical Study.
3, In: Colloids and Interfaces, (3), Molecular Diversity Preservation International (MDPI), S. 56, ISSN 2504-5377, DOI: 10.3390/colloids3030056,
[Online-Edition: https://doi.org/10.3390/colloids3030056],
[Artikel]

Bakhtiari, Faramarz ; Schiffer, Heinz-Peter (2019):
Numerical approach to the modelling of transient interaction of prospective combustor concepts and conventional high pressure turbines.
In: Propulsion and Power Research, ISSN 2212540X, DOI: 10.1016/j.jppr.2019.01.008,
[Online-Edition: https://doi.org/10.1016/j.jppr.2019.01.008],
[Artikel]

Baron, Andreas ; Kohne, Thomas ; Panten, Niklas ; Roloff, Nils ; Abele, Eberhard (2019):
Jenseits der Energiemärkte.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (9), Carl Hanser Verlag, München, S. 564-568, ISSN 0947-0085, DOI: 10.3139/104.112151,
[Artikel]

Becker, Lukas G. ; von Langenthal, Thomas ; Pielsticker, Stefan ; Böhm, Benjamin ; Kneer, Reinhold ; Dreizler, Andreas (2019):
Experimental investigation of particle-laden flows in an oxy-coal combustion chamber for non-reacting conditions.
235, In: Fuel, S. 753-762, ISSN 00162361, DOI: 10.1016/j.fuel.2018.08.076,
[Online-Edition: https://doi.org/10.1016/j.fuel.2018.08.076],
[Artikel]

Bender, Achim ; Stroh, Alexander ; Frohnapfel, Bettina ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2019):
Combined direct numerical simulation and long-wave simulation of a liquid film sheared by a turbulent gas flow in a channel.
31, In: Physics of Fluids, (2), S. 022103, DOI: 10.1063/1.5064423,
[Online-Edition: https://doi.org/10.1063/1.5064423],
[Artikel]

Brumm, Pauline ; Sauer, Hans Martin ; Dörsam, Edgar (2019):
Scaling Behavior of Pattern Formation in the Flexographic Ink Splitting Process.
3, In: Colloids and Interfaces, (1), S. 37, ISSN 2504-5377, DOI: 10.3390/colloids3010037,
[Online-Edition: https://www.mdpi.com/2504-5377/3/1/37],
[Artikel]

Butz, David ; Hartl, Sandra ; Popp, Sebastian ; Walther, Steffen ; Barlow, Robert S. ; Hasse, Christian ; Dreizler, Andreas ; Geyer, Dirk (2019):
Local flame structure analysis in turbulent CH4/air flames with multi-regime characteristics.
210, In: Combustion and Flame, Elsevier, S. 426 - 438, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.08.032,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2019.08.032],
[Artikel]

Bürkle, Sebastian ; Becker, Lukas G. ; Agizza, Maria A. ; Dreizler, Andreas ; Wagner, Steven (2019):
Comparison of two measurement strategies to obtain the residence time distribution in combustion chambers using tunable diode laser absorption spectroscopy.
58, In: Applied Optics, (10), S. C36, ISSN 1559-128X, DOI: 10.1364/ao.58.000c36,
[Online-Edition: https://doi.org/10.1364/ao.58.000c36],
[Artikel]

Dammel, Frank ; Oltmanns, Johannes ; Stephan, Peter (2019):
Nutzung der Abwärme des Hochleistungsrechners am Campus Lichtwiese.
In: Euro Heat & Power, EW Medien und Kongresse GmbH, S. 28-31, ISSN 0949-166X, [Online-Edition: https://bc.pressmatrix.com/de/profiles/3710b1d1bc07/editions...],
[Artikel]

Diemel, Oliver ; Honza, Rene ; Ding, Carl-Philipp ; Böhm, Benjamin ; Wagner, Steven (2019):
In situ sensor for cycle-resolved measurement of temperature and mole fractions in IC engine exhaust gases.
37, In: Proceedings of the Combustion Institute, (2), Elsevier, S. 1453 - 1460, ISSN 1540-7489, DOI: 10.1016/j.proci.2018.06.182,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.182],
[Artikel]

Ding, C.-P. ; Peterson, B. ; Schmidt, M. ; Dreizler, A. ; Böhm, B. (2019):
Flame/flow dynamics at the piston surface of an IC engine measured by high-speed PLIF and PTV.
37, In: Proceedings of the Combustion Institute, (4), Elsevier, S. 4973 - 4981, ISSN 1540-7489, DOI: 10.1016/j.proci.2018.06.215,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.215],
[Artikel]

Emmert, Johannes ; Grauer, Samuel J. ; Wagner, Steven ; Daun, Kyle J. (2019):
Efficient Bayesian inference of absorbance spectra from transmitted intensity spectra.
27, In: Optics Express, (19), Optical Society of America (OSA), S. 26893, ISSN 1094-4087, DOI: 10.1364/oe.27.026893,
[Online-Edition: https://doi.org/10.1364/oe.27.026893],
[Artikel]

Felger, Julian ; Rosendahl, Philipp Laurens ; Leguillon, Dominique ; Becker, Wilfried (2019):
Predicting crack patterns at bi-material junctions: A coupled stress and energy approach.
164, In: International Journal of Solids and Structures, Elsevier, S. 191-201, ISSN 0020-7683, DOI: 10.1016/j.ijsolstr.2019.01.015,
[Artikel]

Felger, Julian ; Stein, Nicolas ; Frey, Christopher ; Becker, Wilfried (2019):
Scaling laws for the adhesive composite butt joint strength derived by finite fracture mechanics.
208, In: Composite Structures, S. 546-556, ISSN 0263-8223, DOI: 10.1016/j.compstruct.2018.09.100,
[Artikel]

Franceschi, Alessandro ; Groche, Peter (2019):
Verzugsarme Kaltmassivumformung - Entwicklung einer neuen Technologie zur Reduzierung der Eigenspannungen.
10, In: wt Werkstattstechnik online, Springer-VDI-Verlag, S. 740-744, ISSN 1436-4980, [Online-Edition: https://www.werkstattstechnik.de/wt/article.php?data[article...],
[Artikel]

Franceschi, Alessandro ; Kaffenberger, Matthias ; Schork, Benjamin ; Hoche, Holger ; Oechsner, Matthias ; Groche, Peter (2019):
Observations on the stability of the residual stresses after cold forming and unidirectional loading.
In: Production Engineering, Research and Development: WGP, Springer Verlag, Heidelberg, [Artikel]

Franz, Daniel ; Schneider, Maximilian ; Richter, Michael ; Rinderknecht, Stephan (2019):
Thermal Behavior of a Magnetically Levitated Spindle for Fatigue Testing of Fiber Reinforced Plastic.
8, In: Actuators, (2), MDPI, ISSN 2076-0825, DOI: 10.3390/act8020037,
[Online-Edition: https://doi.org/10.3390/act8020037],
[Artikel]

Friesen, John ; Taubenböck, Hannes ; Wurm, Michael ; Pelz, P. F. (2019):
Size distributions of slums across the globe using different data and classification methods.
In: European Journal of Remote Sensing, Taylor & Francis, S. 1-13, ISSN 2279-7254, DOI: 10.1080/22797254.2019.1579617,
[Online-Edition: https://doi.org/10.1080/22797254.2019.1579617],
[Artikel]

Gambaryan-Roisman, Tatiana (2019):
Simultaneous imbibition and evaporation of liquids on grooved substrates.
7, In: Interfacial Phenomena and Heat Transfer, 2019, (3), Begell, S. 239-253, ISSN 2169-2785, e-ISSN 2167-857X, DOI: 10.1615/InterfacPhenomHeatTransfer.2019031166,
[Online-Edition: https://doi.org/10.1615/InterfacPhenomHeatTransfer.201903116...],
[Artikel]

Groche, Peter ; Hohmann, Johannes ; Übelacker, David (2019):
Overview and comparison of different sensor positions and measuring methods for the process force measurement in stamping operations.
135, In: Journal of the International Measurement Confederation, S. 122-130, [Artikel]

Groche, Peter ; Wu, Yutian (2019):
Inline observation of tool wear in deep drawing with thermoelectric and optical measurements.
68, In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, (1), Elsevier, S. 567-570, ISSN 0007-8506, [Online-Edition: https://doi.org/10.1016/j.cirp.2019.04.034],
[Artikel]

Grosch, Benedikt ; Weitzel, Timm ; Panten, Niklas ; Abele, Eberhard (2019):
A Metaheuristic for Energy Adaptive Production Scheduling with Multiple Energy Carriers and its Implementation in a Real Production System 2.
80, In: Procedia CIRP, 26th CIRP Life Cycle Engineering Conference, West Lafayette, IN (USA), Elsevier B.V., S. 203-208, ISSN 2212-8271, DOI: 10.1016/j.procir.2019.01.043,
[Artikel]

Grosch, Thomas ; Schloen, Jan ; Weigold, Matthias ; Abele, Eberhard (2019):
SmartTool++: Test und Erweiterung eines intelligenten Werkzeugs.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (4), Carl Hanser Verlag, S. 219-222, ISSN 0932-0482, DOI: 10.3139/104.112073,
[Artikel]

Haaf, Martin ; Ohlemüller, Peter ; Ströhle, Jochen ; Epple, Bernd (2019):
Techno-economic assessment of alternative fuels in second-generation carbon capture and storage processes.
In: Mitigation and Adaptation Strategies for Global Change, ISSN 1381-2386, DOI: 10.1007/s11027-019-09850-z,
[Online-Edition: https://doi.org/10.1007/s11027-019-09850-z],
[Artikel]

Haaf, Martin ; Unger, Antonio ; Ströhle, Jochen ; Epple, Bernd (2019):
Polygeneration im Kontext der Abfallverwertung.
71, In: BWK Das Energie-Fachmagazin, (9), S. 60-63, [Artikel]

Han, W. ; Wang, H. ; Kuenne, G. ; Hawkes, E. ; Chen, J. ; Janicka, J. ; Hasse, C. (2019):
Large eddy simulation/dynamic thickened flame modeling of a high Karlovitz number turbulent premixed jet flame.
37, In: Proceedings of the Combustion Institute, (2), S. 2555-2563, DOI: 10.1016/j.proci.2018.06.228,
[Artikel]

Han, Wang ; Scholtissek, Arne ; Hasse, Christian (2019):
The role of tangential diffusion in evaluating the performance of flamelet models.
37, In: Proceedings of the Combustion Institute, (2), S. 1767-1774, ISSN 15407489, DOI: 10.1016/j.proci.2018.06.171,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.171],
[Artikel]

Han, Wang ; Wang, Haiou ; Kuenne, Guido ; Hawkes, Evatt R. ; Chen, Jacqueline H. ; Janicka, Johannes ; Hasse, Christian (2019):
Large eddy simulation/dynamic thickened flame modeling of a high Karlovitz number turbulent premixed jet flame.
37, In: Proceedings of the Combustion Institute, (2), S. 2555-2563, ISSN 15407489, DOI: 10.1016/j.proci.2018.06.228,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.228],
[Artikel]

Hartl, S. ; Van Winkle, R. ; Geyer, D. ; Dreizler, A. ; Magnotti, G. ; Hasse, C. ; Barlow, R.S. (2019):
Assessing the relative importance of flame regimes in Raman/Rayleigh line measurements of turbulent lifted flames.
37, In: Proceedings of the Combustion Institute, (2), S. 2297-2305, ISSN 15407489, DOI: 10.1016/j.proci.2018.06.067,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.067],
[Artikel]

Hartmann, Maximilian ; Hardt, Steffen (2019):
Stability of Evaporating Droplets on Chemically Patterned Surfaces.
35, In: Langmuir, (14), S. 4868-4875, ISSN 0743-7463, DOI: 10.1021/acs.langmuir.9b00172,
[Online-Edition: https://doi.org/10.1021/acs.langmuir.9b00172],
[Artikel]

Heckmann, Martin ; Köhler, Stefan ; Biffar, Simon ; Groche, Peter (2019):
Stegblechumformung für den Karosseriebau.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (9), Carl Hanser Verlag, S. 554-558, ISSN 0947-0085, DOI: 10.3139/104.112155,
[Artikel]

Heep, Thomas ; Bickert, Christian ; Abele, Eberhard (2019):
Application of Carbon Dioxide Snow in Machining of CGI using an Additively Manufactured Turning Tool.
3, In: Journal of Manufacturing and Materials Processing, MDPI AG, Switzerland, (15), ISSN 2504-4494, [Online-Edition: https://doi.org/10.3390/jmmp3010015],
[Artikel]

Herzog, Nicole ; Brilmayer, Robert ; Stanzel, Mathias ; Kalyta, Anastasia ; Spiehl, Dieter ; Dörsam, Edgar ; Hess, Christian ; Andrieu-Brunsen, Annette (2019):
Gravure printing for mesoporous film preparation.
9, In: RSC Advances, (41), Royal Socienty of Chemistry, S. 23570-23578, ISSN 2046-2069, DOI: 10.1039/C9RA04266K,
[Online-Edition: https://doi.org/10.1039/C9RA04266K],
[Artikel]

Heß, Julian ; Cheviakov, Alexei F. (2019):
A solution set-based entropy principle for constitutive modeling in mechanics.
31, In: Continuum Mechanics and Thermodynamics, (3), S. 775-806, ISSN 0935-1175, DOI: 10.1007/s00161-018-0737-4,
[Online-Edition: https://doi.org/10.1007/s00161-018-0737-4],
[Artikel]

Hill, H. ; Ding, C.-P. ; Baum, E. ; Böhm, B. ; Dreizler, A. ; Peterson, B. (2019):
An application of tomographic PIV to investigate the spray-induced turbulence in a direct-injection engine.
121, In: International Journal of Multiphase Flow, Elsevier, S. 103116, ISSN 0301-9322, DOI: 10.1016/j.ijmultiphaseflow.2019.103116,
[Online-Edition: https://doi.org/10.1016/j.ijmultiphaseflow.2019.103116],
[Artikel]

Hilz, Jochen ; Haaf, Martin ; Helbig, Martin ; Lindqvist, Niklas ; Ströhle, Jochen ; Epple, Bernd (2019):
Scale-up of the carbonate looping process to a 20 MWth pilot plant based on long-term pilot tests.
88, In: International Journal of Greenhouse Gas Control, S. 332-341, ISSN 17505836, DOI: 10.1016/j.ijggc.2019.04.026,
[Online-Edition: https://doi.org/10.1016/j.ijggc.2019.04.026],
[Artikel]

Hoppe, Florian ; Hohmann, Johannes ; Knoll, Maximilian ; Kubik, Christian ; Groche, Peter (2019):
Feature-based Supervision of Shear Cutting Processes on the Basis of Force Measurements: Evaluation of Feature Engineering and Feature Extraction.
34, In: Procedia Manufacturing, Elsevier B.V, S. 847-856, ISSN 2351-9789, DOI: 10.1016/j.promfg.2019.06.164,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S235197891...],
[Artikel]

Hänichen, Philipp ; Bender, Achim ; Voß, Bernhard ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2019):
Drop evaporation of hydrocarbon fluids with deposit formation.
128, In: International Journal of Heat and Mass Transfer, S. 115 - 124, ISSN 0017-9310, DOI: 10.1016/j.ijheatmasstransfer.2018.08.102,
[Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.102],
[Artikel]

Johchi, Ayane ; Pareja, Jhon ; Böhm, Benjamin ; Dreizler, Andreas (2019):
Quantitative mixture fraction imaging of a synthetic biogas turbulent jet propagating into a NO-vitiated air co-flow using planar laser-induced fluorescence (PLIF).
60, In: Experiments in Fluids, (5), ISSN 0723-4864, DOI: 10.1007/s00348-019-2723-4,
[Online-Edition: https://doi.org/10.1007/s00348-019-2723-4],
[Artikel]

Kaiser, Joscha ; Urnauer, Christian ; Metternich, Joachim (2019):
A Framework for Planning Logistical Alternatives in Value Stream Design.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), Elsevier B.V., S. 180-185, DOI: 10.1016/j.procir.2019.03.032,
[Artikel]

Keller, Thimo ; Bayer, Christian ; Bausch, Phillip ; Metternich, Joachim (2019):
Benefit Evaluation of Digital Assistance Systems for Assembly Workstations.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), S. 441-446, DOI: 10.1016/j.procir.2019.03.076,
[Artikel]

Keller, Thimo ; Bayer, Christian ; Metternich, Joachim ; Schmidt, Stephanie ; Saki, Mehrach ; Straeter, Oliver ; Hartwich, Hans-Dieter ; Anlauft, Wolfgang (2019):
Evaluationskonzept zur Nutzenbewertung digitaler Assistenzsysteme am Montagearbeitsplatz.
In: Frühjahrskongress 2019, Dresden – Arbeit interdisziplinär analysieren – bewerten – gestalten, GfA, Dortmund (Hrsg.):, S. C.9.5, [Artikel]

Kez, Vitali ; Consalvi, Jean-Louis ; Liu, Fengshan ; Gronarz, Tim ; Ströhle, Jochen ; Kneer, Reinhold ; Epple, Bernd (2019):
Investigation of gas and particle radiation modelling in wet oxy-coal combustion atmospheres.
133, In: International Journal of Heat and Mass Transfer, S. 1026-1040, ISSN 00179310, DOI: 10.1016/j.ijheatmasstransfer.2019.01.013,
[Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.013],
[Artikel]

Knappstein, R. ; Kuenne, G. ; Nicolai, H. ; di Mare, F. ; Sadiki, A. ; Janicka, J. (2019):
Description of the char conversion process in coal combustion based on premixed FGM chemistry.
236, In: Fuel, S. 124-134, ISSN 00162361, DOI: 10.1016/j.fuel.2018.08.158,
[Online-Edition: https://doi.org/10.1016/j.fuel.2018.08.158],
[Artikel]

Kohne, Thomas ; Becker, Aron ; Weber, Thomas ; Panten, Niklas ; Abele, Eberhard (2019):
Modeling Approach for Thermal Dependencies in Complex Industrial Energy Supply System.
2, In: 8th DACH+ Conference on Energy Informatics, Abstract, (S2), S. 13-17, DOI: 10.1186/s42162-019-0098-7,
[Artikel]

Kramer, Philipp ; Groche, Peter (2019):
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
7, In: Lubricants, (2), MDPI, ISSN 2075-4442, DOI: 10.3390/lubricants7020012,
[Online-Edition: https://doi.org/10.3390/lubricants7020012],
[Artikel]

Kumar, Abhijeet ; Trambitas, Alexandra ; Peggau, Jörg ; Dahl, Verena ; Venzmer, Joachim ; Gambaryan-Roisman, Tatiana ; Kleinen, Jochen (2019):
Charge and size matters — How to formulate organomodified silicones for textile applications.
560, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, S. 180 - 188, ISSN 0927-7757, DOI: 10.1016/j.colsurfa.2018.09.080,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2018.09.080],
[Artikel]

Köser, Jan ; Li, Tao ; Vorobiev, Nikita ; Dreizler, Andreas ; Schiemann, Martin ; Böhm, Benjamin (2019):
Multi-parameter diagnostics for high-resolution in-situ measurements of single coal particle combustion.
37, In: Proceedings of the Combustion Institute, (3), S. 2893-2900, ISSN 15407489, DOI: 10.1016/j.proci.2018.05.116,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.05.116],
[Artikel]

Li, Lingxi ; Rosenkranz, Simon ; Schäfer, Walter ; Tropea, Cameron (2019):
Light scattering from a drop with an embedded particle and its exploitation in the time-shift technique.
227, In: Journal of Quantitative Spectroscopy and Radiative Transfer, S. 20-31, ISSN 00224073, DOI: 10.1016/j.jqsrt.2019.01.022,
[Online-Edition: https://doi.org/10.1016/j.jqsrt.2019.01.022],
[Artikel]

Löber, Florian ; Moog, Daniel ; Langner, Robin ; Abele, Eberhard (2019):
Kennzahlenbasierte Bewertung technischer Energieflexibilitätspotenziale in der Produktion.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (3), S. 128-133, ISSN 0947-0085, [Artikel]

Ma, Bole ; Wang, Yongqi ; Kikker, Anne (2019):
Analytical solutions of oscillating Couette–Poiseuille flows for the viscoelastic Oldroyd B fluid.
In: Acta Mechanica, ISSN 0001-5970, DOI: 10.1007/s00707-019-02391-1,
[Online-Edition: https://doi.org/10.1007/s00707-019-02391-1],
[Artikel]

Mardani, Houman ; Stein, Nicolas ; Rosendahl, Philipp Laurens ; Becker, Wilfried (2019):
An efficient stress and deformation model for arbitrary elastic-perfectly plastic adhesive lap joints.
In: International Journal of Adhesion and Adhesives, ISSN 0143-7496, [Artikel]

Mateus, M. M. ; Matos, S. ; Guerreiro, D. ; Debiagi, P. ; Gaspar, D. ; Ferreira, O. ; Bordado, J. C. ; Santos, R. G. (2019):
Liquefaction of almond husk for assessment as feedstock to obtain valuable bio-oils.
In: Pure and Applied Chemistry, De Gruyter, ISSN 1365-3075, DOI: 10.1515/pac-2019-0304,
[Online-Edition: https://doi.org/10.1515/pac-2019-0304],
[Artikel]

Meister, Maximilian ; Beßle, Julia ; Cviko, Amir ; Böing, Tobias ; Metternich, Joachim (2019):
Manufacturing Analytics for Problem-Solving Processes in Production.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), Elsevier Ltd., S. 1-6, DOI: 10.1016/j.procir.2019.03.001,
[Artikel]

Meister, Maximilian ; Hartmann, Lukas ; Wünsch, Markus ; Metternich, Joachim ; Cviko, Amir ; Böing, Tobias (2019):
Manufacturing Analytics für reaktive Qualitätsprozesse: Literaturanalyse und Beispiele aus der Praxis.
35, In: Industrie 4.0 Management, (2), GITO Verlag, Berlin, S. 43-48, ISSN 1434-1980, [Artikel]

Merklein, Lisa ; Daume, Dominik ; Braig, Felix ; Schlisske, Stefan ; Rödlmeier, Tobias ; Mink, Marvin ; Kourkoulos, Dimitrios ; Ulber, Benjamin ; Di Biase, Manuela ; Meerholz, Klaus ; Hernandez-Sosa, Gerardo ; Lemmer, Uli ; Sauer, Hans Martin ; Dörsam, Edgar ; Scharfer, Philip ; Schabel, Wilhelm (2019):
Comparative Study of Printed Multilayer OLED Fabrication through Slot Die Coating, Gravure and Inkjet Printing, and Their Combination.
3, In: Colloids and Interfaces, (1), S. 32, ISSN 2504-5377, DOI: 10.3390/colloids3010032,
[Online-Edition: https://www.mdpi.com/2504-5377/3/1/32],
[Artikel]

Metternich, Joachim ; Weigold, Matthias ; Stanula, Patrick ; Ziegenbein, Amina (2019):
Vernetzung und Digitalisierung für die innovative Datenanalyse (Teil 1): Reihe: Künstliche Intelligenz, Maschinendaten, Algorithmen, Effizienz, Geschäftsmodelle.
In: Portal für spanende Fertigung, Werkstatt + Betrieb : WB, (E-Paper), [Online-Edition: https://www.werkstatt-betrieb.de/fachinformationen/e-only/ar...],
[Artikel]

Miranda, Flavia C. ; Coelho, Pedro J. ; Mare, Francesca di ; Janicka, Johannes (2019):
Study of turbulence-radiation interactions in large-eddy simulation of scaled Sandia flame D.
228, In: Journal of Quantitative Spectroscopy and Radiative Transfer, S. 47-56, ISSN 00224073, DOI: 10.1016/j.jqsrt.2019.02.010,
[Online-Edition: https://doi.org/10.1016/j.jqsrt.2019.02.010],
[Artikel]

Müller, T. M. ; Altherr, L. C. ; Ahola, Marja Birgit ; Schabel, Samuel ; Pelz, P. F. Multi-Criteria Optimization of Pressure Screen Systems in Paper Recycling — Balancing Quality, Yield, Energy Consumption and System Complexity.
In: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, Springer International Publishing, S. 1216-1228, DOI: 10.1007/978-3-319-97773-7_105,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_190701_E...],
[Artikel]

Noll, Veronika ; Whitmore, Sigrid ; Beckerle, Philipp ; Rinderknecht, Stephan (2019):
A Sensor Array for the Measurement of Relative Motion in Lower Limb Prosthetic Sockets.
19, In: Sensors, (12), MDPI, ISSN 1424-8220, DOI: 10.3390/s19122658,
[Online-Edition: https://doi.org/10.3390/s19122658],
[Artikel]

Ohlemüller, Peter ; Reitz, Michael ; Ströhle, Jochen ; Epple, Bernd (2019):
Investigation of chemical looping combustion of natural gas at 1 MWth scale.
37, In: Proceedings of the Combustion Institute, (4), S. 4353-4360, ISSN 15407489, DOI: 10.1016/j.proci.2018.07.035,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.07.035],
[Artikel]

Okajima, Junnosuke ; Stephan, Peter (2019):
Numerical simulation of liquid film formation and its heat transfer through vapor bubble expansion in a microchannel.
136, In: International Journal of Heat and Mass Transfer, S. 1241 - 1249, ISSN 0017-9310, DOI: 10.1016/j.ijheatmasstransfer.2019.03.004,
[Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.004],
[Artikel]

Olguin, H. ; Scholtissek, A. ; Gonzalez, S. ; Gonzalez, F. ; Ihme, M. ; Hasse, C. ; Gutheil, E. (2019):
Closure of the scalar dissipation rate in the spray flamelet equations through a transport equation for the gradient of the mixture fraction.
208, In: Combustion and Flame, Elsevier BV, S. 330-350, ISSN 1556-2921, DOI: 10.1016/j.combustflame.2019.05.033,
[Online-Edition: http://10.1016/j.combustflame.2019.05.033],
[Artikel]

Pareja, Jhon ; Johchi, Ayane ; Li, Tao ; Dreizler, Andreas ; Böhm, Benjamin (2019):
A study of the spatial and temporal evolution of auto-ignition kernels using time-resolved tomographic OH-LIF.
37, In: Proceedings of the Combustion Institute, (2), Elsevier, S. 1321 - 1328, ISSN 1540-7489, DOI: 10.1016/j.proci.2018.06.028,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.028],
[Artikel]

Paulssen, Dorothea ; Hardt, Steffen ; Levkin, Pavel A. (2019):
Droplet Sorting and Manipulation on Patterned Two-Phase Slippery Lubricant-Infused Surface.
11, In: ACS Applied Materials & Interfaces, (17), S. 16130-16138, ISSN 1944-8244, DOI: 10.1021/acsami.8b21879,
[Online-Edition: https://doi.org/10.1021/acsami.8b21879],
[Artikel]

Peterson, Brian ; Baum, Elias ; Dreizler, Andreas ; Böhm, Benjamin (2019):
An experimental study of the detailed flame transport in a SI engine using simultaneous dual-plane OH-LIF and stereoscopic PIV.
202, In: Combustion and Flame, S. 16-32, ISSN 00102180, DOI: 10.1016/j.combustflame.2018.12.024,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2018.12.024],
[Artikel]

Pollack, M. ; Pütz, M. ; Marchisio, D. L. ; Oevermann, M. ; Hasse, C. (2019):
Zero-flux approximations for multivariate quadrature-based moment methods.
398, In: Journal of Computational Physics, S. 108879, ISSN 0021-9991, DOI: 10.1016/j.jcp.2019.108879,
[Online-Edition: https://doi.org/10.1016/j.jcp.2019.108879],
[Artikel]

Rau, F. ; Hartl, S. ; Hasse, C. (2019):
Numerical and experimental investigation of the laminar burning velocity of biofuels at atmospheric and high-pressure conditions.
247, In: Fuel, S. 250-256, ISSN 00162361, DOI: 10.1016/j.fuel.2019.03.024,
[Online-Edition: https://doi.org/10.1016/j.fuel.2019.03.024],
[Artikel]

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Janicka, Johannes ; Sadiki, Amsini (2019):
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
21, In: Entropy, (2), MDPI, S. 129, ISSN 1099-4300, DOI: 10.3390/e21020129,
[Online-Edition: https://doi.org/10.3390/e21020129],
[Artikel]

Rosendahl, Philipp Laurens ; Drass, Michael ; Felger, Julian ; Schneider, Jens ; Becker, Wilfried (2019):
Equivalent strain failure criterion for multiaxially loaded incompressible hyperelastic elastomers.
166, In: International Journal of Solids and Structures, Elsevier, S. 32-46, ISSN 00207683, DOI: 10.1016/j.ijsolstr.2019.01.030,
[Artikel]

Rosendahl, Philipp Laurens ; Staudt, Yves ; Odenbreit, Christoph ; Schneider, Jens ; Becker, Wilfried (2019):
Measuring mode I fracture properties of thick-layered structural silicone sealants.
91, In: International Journal of Adhesion and Adhesives, S. 64-71, ISSN 01437496, DOI: 10.1016/j.ijadhadh.2019.02.012,
[Artikel]

Rosendahl, Philipp Laurens ; Staudt, Yves ; Schneider, Alexandra Patrizia ; Schneider, Jens ; Becker, Wilfried (2019):
Nonlinear elastic finite fracture mechanics: Modeling mixed-mode crack nucleation in structural glazing silicone sealants.
182, In: Materials & Design, Elsevier, S. 108057, ISSN 02641275, DOI: 10.1016/j.matdes.2019.108057,
[Online-Edition: https://tuprints.ulb.tu-darmstadt.de/9297],
[Artikel]

Rosendahl, Philipp Laurens ; Weißgraeber, Philipp (2019):
Modeling snow slab avalanches caused by weak layer failure – Part I: Slabs on compliant and collapsible weak layers.
In: The Cryosphere Discussions, S. 1-28, ISSN 1994-0440, DOI: 10.5194/tc-2019-86,
[Artikel]

Rosendahl, Philipp Laurens ; Weißgraeber, Philipp (2019):
Modeling snow slab avalanches caused by weak layer failure – Part II: Coupled mixed-mode criterion for skier-triggered anticracks.
In: The Cryosphere Discussions, S. 1-25, ISSN 1994-0440, DOI: 10.5194/tc-2019-87,
[Artikel]

Roy, Tamal ; Szuttor, Kai ; Smiatek, Jens ; Holm, Christian ; Hardt, Steffen (2019):
Conformation and Dynamics of Long-Chain End-Tethered Polymers in Microchannels.
11, In: Polymers, (3), S. 488, ISSN 2073-4360, DOI: 10.3390/polym11030488,
[Online-Edition: https://doi.org/10.3390/polym11030488],
[Artikel]

Sacomano Filho, F. L. ; Kadavelil, J. ; Staufer, M. ; Sadiki, A. ; Janicka, J. (2019):
Analysis of LES-based combustion models applied to an acetone turbulent spray flame.
191, In: Combustion Science and Technology, (1), Taylor & Francis Inc, S. 54-67, ISSN 0010-2202, DOI: 10.1080/00102202.2018.1452404,
[Artikel]

Salenbauch, Steffen ; Hasse, Christian ; Vanni, Marco ; Marchisio, Daniele L. (2019):
A numerically robust method of moments with number density function reconstruction and its application to soot formation, growth and oxidation.
128, In: Journal of Aerosol Science, S. 34-49, ISSN 00218502, DOI: 10.1016/j.jaerosci.2018.11.009,
[Online-Edition: https://doi.org/10.1016/j.jaerosci.2018.11.009],
[Artikel]

Schabel, Samuel ; Klüh, Daniel (2019):
Im Spannungsfeld zwischen neuen Technologien, Energiewende und Klimazielen.
In: Aktuelle Papier-Rundschau, (1-2), S. 42-45, [Artikel]

Schaede, Carsten ; Hartmann, Lukas ; Metternich, Joachim (2019):
Mapping and Design of Information Processing for Machining of Individualized Components.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), Elsevier, S. 1366-1371, ISSN 2212-8271, DOI: 10.1016/j.procir.2019.04.029,
[Artikel]

Schneider, Silvan ; Geyer, Dirk ; Magnotti, Gaetano ; Dunn, Matthew J. ; Barlow, Robert S. ; Dreizler, Andreas (2019):
Structure of a stratified CH4 flame with H2 addition.
37, In: Proceedings of the Combustion Institute, (2), Elsevier, S. 2307 - 2315, ISSN 1540-7489, DOI: 10.1016/j.proci.2018.06.205,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.205],
[Artikel]

Scholtissek, A. ; Domingo, P. ; Vervisch, L. ; Hasse, C. (2019):
A self-contained progress variable space solution method for thermochemical variables and flame speed in freely-propagating premixed flamelets.
37, In: Proceedings of the Combustion Institute, (2), S. 1529-1536, ISSN 15407489, DOI: 10.1016/j.proci.2018.06.168,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.06.168],
[Artikel]

Schott, Paul ; Sedlmeir, Johannes ; Strobel, Nina ; Weber, Thomas ; Fridgen, Gilbert ; Abele, Eberhard (2019):
A Generic Data Model for Describing Flexibility in Power Markets.
12, In: Energies, (10), MDPI AG, Basel, Switzerland, S. 1893, ISSN 1996-1073, DOI: 10.3390/en12101893,
[Artikel]

Schraml, Philipp (2019):
Weiterdenker gesucht.
In: VDMA MAGAZIN, VDMA Verlag, Frankfurt am Main, (1), S. 15, [Artikel]

Schwarzer, Madeleine ; Otto, Thomas ; Schremb, Markus ; Marschelke, Claudia ; Tee, Hisaschi T. ; Wurm, Frederik R. ; Roisman, Ilia V. ; Tropea, Cameron ; Synytska, Alla (2019):
Supercooled Water Drops Do Not Freeze During Impact on Hybrid Janus Particle-Based Surfaces.
31, In: Chemistry of Materials, (1), S. 112-123, ISSN 0897-4756, DOI: 10.1021/acs.chemmater.8b03183,
[Online-Edition: https://doi.org/10.1021/acs.chemmater.8b03183],
[Artikel]

Schweikert, Kai ; Sielaff, Axel ; Stephan, Peter (2019):
Heat flux during dip-coating of a superheated substrate.
7, In: Interfacial Phenomena and Heat Transfer, 2019, (3), Begell, S. 269-281, ISSN 2169-2785, e-ISSN 2167-857X, DOI: 10.1615/InterfacPhenomHeatTransfer.2019032623,
[Online-Edition: https://doi.org/10.1615/InterfacPhenomHeatTransfer.201903262...],
[Artikel]

Schweikert, Kai ; Sielaff, Axel ; Stephan, Peter (2019):
On the transition between contact line evaporation and microlayer evaporation during the dewetting of a superheated wall.
145, In: International Journal of Thermal Sciences, Elsevier, S. 106025, ISSN 1290-0729, DOI: 10.1016/j.ijthermalsci.2019.106025,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S1290072919...],
[Artikel]

Schäfer, Julian ; Roisman, Ilia V. ; Sauer, Hans Martin ; Dörsam, Edgar (2019):
Millisecond fluid pattern formation in the nip of a gravure printing machine.
575, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, S. 222-229, ISSN 09277757, DOI: 10.1016/j.colsurfa.2019.04.085,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2019.04.085],
[Artikel]

Schürmann, Tim ; Mohler, Betty Jo ; Peters, Jan ; Beckerle, Philipp (2019):
How Cognitive Models of Human Body Experience Might Push Robotics.
13, In: Frontiers in Neurorobotics, Frontiers, ISSN 1662-5218, DOI: 10.3389/fnbot.2019.00014,
[Online-Edition: https://doi.org/10.3389/fnbot.2019.00014],
[Artikel]

Seitz, Philipp ; Abele, Eberhard ; Bank, Lukas ; Bauernhansl, Thomas ; Colangelo, Eduardo ; Fridgen, Gilbert ; Schilp, Johannes ; Schott, Paul ; Sedlmeir, Johannes ; Strobel, Nina ; Weber, Thomas (2019):
IT-based Architecture for Power Market Oriented Optimization at Multiple Levels in Production Processes.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), Elsevier B.V., S. 618-623, DOI: 10.1016/j.procir.2019.03.165,
[Artikel]

Shokina, Nina ; Bauer, Andreas ; Teschner, Gabriel ; Buchenberg, Waltraud B. ; Tropea, Cameron ; Egger, Herbert ; Hennig, Jürgen ; Krafft, Axel J. (2019):
MR-based wall shear stress measurements in fully developed turbulent flow using the Clauser plot method.
305, In: Journal of Magnetic Resonance, Elsevier, S. 16-21, ISSN 10907807, DOI: 10.1016/j.jmr.2019.05.009,
[Online-Edition: https://doi.org/10.1016/j.jmr.2019.05.009],
[Artikel]

Sossenheimer, Johannes ; Walther, Jessica ; Fleddermann, Jan ; Abele, Eberhard (2019):
A Sensor Reduced Machine Learning Approach for Condition-based Energy Monitoring for Machine Tools.
81, In: Procedia CIRP, 52nd CIRP Conference on Manufacturing Systems, Ljubljana (Slovenia), Elsevier B.V., S. 570-575, DOI: 10.1016/j.procir.2019.03.157,
[Artikel]

Stamm, Jacqueline ; Spiehl, Dieter ; Jaeger, Jeannine ; Groher, Florian ; Meckel, Tobias ; Suess, Beatrix ; Dörsam, Edgar (2019):
A test system for the printing of functional nucleic acids onto different carriers and verification of its functionality by DNA dyes.
8, In: Journal of Print and Media Technology Research, (1), Iarigai, S. 7-17, ISSN 2414-6250, DOI: 10.14622/JPMTR-1821,
[Online-Edition: https://iarigai.org],
[Artikel]

Stanula, Patrick ; Metternich, Joachim ; Glockseisen, Thomas (2019):
Selbstlernendes, dezentrales Produktionssystem in der Kleinserienfertigung.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (6), Carl Hanser Verlag, München, S. 332-335, ISSN 0947-0085, [Artikel]

Stein, Philipp ; Franke, Wilken ; von Elling, Magnus ; Groche, Peter (2019):
Forming Behaviour of Paperboard in Single Point Incremental Forming.
14, In: BioResources.com, S. 1731-1764, [Artikel]

Stephan, Michael ; Zentgraf, Florian ; Berrocal, Edouard ; Albert, Barbara ; Böhm, Benjamin ; Dreizler, Andreas (2019):
Multiple scattering reduction in instantaneous gas phase phosphor thermometry: applications with dispersed seeding.
30, In: Measurement Science and Technology, (5), S. 054003, ISSN 0957-0233, DOI: 10.1088/1361-6501/ab0abc,
[Online-Edition: https://doi.org/10.1088/1361-6501/ab0abc],
[Artikel]

Tai, Yih‐Chin ; Heß, Julian ; Wang, Yongqi (2019):
Modeling Two‐Phase Debris Flows With Grain‐Fluid Separation Over Rugged Topography: Application to the 2009 Hsiaolin Event, Taiwan.
124, In: Journal of Geophysical Research: Earth Surface, (2), S. 305-333, ISSN 2169-9003, DOI: 10.1029/2018JF004671,
[Online-Edition: https://doi.org/10.1029/2018JF004671],
[Artikel]

Takawale, Anand ; Abraham, Satyanand ; Sielaff, Axel ; Mahapatra, Pallab Sinha ; Pattamatta, Arvind ; Stephan, Peter (2019):
A comparative study of flow regimes and thermal performance between flat plate pulsating heat pipe and capillary tube pulsating heat pipe.
149, In: Applied Thermal Engineering, S. 613 - 624, ISSN 1359-4311, DOI: 10.1016/j.applthermaleng.2018.11.119,
[Online-Edition: https://doi.org/10.1016/j.applthermaleng.2018.11.119],
[Artikel]

Traub, Tilman ; Müller, Christian (PtU) ; Groche, Peter (2019):
The perspective of sensor integration and automated decision making in roll forming.
2113, In: AIP Conference Proceedings, S. 170015, [Artikel]

Ullrich, Andre ; Enke, Judith ; Teichmann, Malte ; Kreß, Antonio ; Gronau, Norbert (2019):
Audit – and then what? A Roadmap for Digitization of Learning Factories.
31, In: Procedia Manufacturing, 9th Conference on Learning Factories 2019, Braunschweig, Elsevier B.V., S. 162-168, ISSN 2351-9789, [Online-Edition: https://doi.org/10.1016/j.promfg.2019.03.025],
[Artikel]

Volz, Marcel ; Abele, Eberhard ; Weigold, Matthias (2019):
Innovatives Spannfutter mit integrierter Drehdurchführung.
109, In: Werkstattstechnik online : wt, (1/2), Springer VDI Verlag, Düsseldorf, S. 61-66, ISSN 1436-4980, [Artikel]

Walther, Jessica ; Spanier, Dario ; Panten, Niklas ; Abele, Eberhard (2019):
Very Short-Term Load Forecasting on Factory Level — A Machine Learning Approach.
80, In: Procedia CIRP, 26th CIRP Conference on Life Cycle Engineering Purdue University, West Lafayette, IN (USA), Elsevier B.V., S. 705-710, DOI: 10.1016/j.procir.2019.01.060,
[Artikel]

Wang, Tianbo ; Groche, Peter (2019):
Sheet metal profiles with variable height: Numerical analyses on flexible roller beading.
In: Journal of Manufacturing and Materials Processing, S. 15, [Artikel]

Weber, Markus ; Helfert, Mark ; Unterderweide, Florian ; Abele, Eberhard ; Weigold, Matthias (2019):
Synchronreluktanz-Motorspindeln in Werkzeugmaschinen.
109, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 72-80, ISSN 1436-4980, [Artikel]

Weber, Thomas ; Sossenheimer, Johannes ; Schäfer, Steffen ; Ott, Moritz ; Walther, Jessica ; Abele, Eberhard (2019):
Machine Learning based System Identification Tool for data-based Energy and Resource Modeling and Simulation.
80, In: Procedia CIRP, 26th CIRP Conference on Life Cycle Engineering (LCE) Purdue University, West Lafayette, IN (USA), Elsevier B.V., S. 683-688, DOI: 10.1016/j.procir.2018.12.021,
[Artikel]

Weigold, Matthias ; Hähn, Felix ; Burmester, Jonathan (2019):
Genauere Roboter für Zerspanungsaufgaben — Durch Kompensation ans Ziel.
In: Ingenieurspiegel, (3), Public Verlag, Bingen, S. 27-29, ISSN 1868-5919, [Artikel]

Weigold, Matthias ; Metternich, Joachim ; Brockhaus, Benjamin ; Fertig, Alexander (2019):
Herausforderungen bei Datenerfassung und Datentransport in bestehenden Produktionsumgebungen (Teil 2): Reihe: Künstliche Intelligenz, Maschinendaten, Algorithmen, Effizienz, Geschäftsmodelle.
In: Portal für spanende Fertigung, Werkstatt + Betrieb : WB, (E-Paper), [Online-Edition: https://www.werkstatt-betrieb.de/fachinformationen/e-only/ar...],
[Artikel]

Wen, X. ; Debiagi, P. ; Stein, O. T. ; Kronenburg, A. ; Kempf, A. M. ; Hasse, C. (2019):
Flamelet tabulation methods for solid fuel combustion with fuel-bound nitrogen.
209, In: Combustion and Flame, Elsevier, S. 155 - 166, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2019.07.039,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0010218019...],
[Artikel]

Weyand, Astrid ; Heßler, Florian ; Sossenheimer, Johannes ; Abele, Eberhard (2019):
Ressourceneffizienz in der Produktion: Vorgehen zur Quantifizierung und Steigerung der Ressourceneffizienz am Beispiel von Altkühlgeräteentsorgungsanlagen.
114, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (9), Carl Hanser Verlag, München, S. 525-529, ISSN 0947-0085, [Artikel]

Wilhelm, Manuel ; Schiffer, Heinz-Peter (2019):
Experimental Investigation of Rotor Tip Film Cooling at an Axial Turbine with Swirling Inflow Using Pressure Sensitive Paint.
4, In: International Journal of Turbomachinery, Propulsion and Power, (3), MDPI, S. 23, ISSN 2504-186X, DOI: 10.3390/ijtpp4030023,
[Online-Edition: https://doi.org/10.3390/ijtpp4030023],
[Artikel]

Yuan, Qingqing ; Wang, Chun ; Wang, Yongqi ; Peng, Chong ; Meng, Xiannan (2019):
Investigation of Submerged Soil Excavation by High-Velocity Water Jet Using Two-Fluid Smoothed Particle Hydrodynamics Method.
145, In: Journal of Hydraulic Engineering, (6), S. 04019016, ISSN 0733-9429, DOI: 10.1061/(asce)hy.1943-7900.0001599,
[Online-Edition: https://doi.org/10.1061/(asce)hy.1943-7900.0001599],
[Artikel]

Zech, Philipp ; Plöger, Daniel Fritz ; Rinderknecht, Stephan (2019):
Active control of planetary gearbox vibration using phase-exact and narrowband simultaneous equations adaptation without explicitly identified secondary path models.
120, In: Mechanical Systems and Signal Processing, S. 234-251, [Artikel]

Zhao, Sicheng ; Dietzel, Mathias ; Hardt, Steffen (2019):
Faraday instability of a liquid layer on a lubrication film.
879, In: Journal of Fluid Mechanics, Cambridge University Press, S. 422-447, ISSN 0022-1120, DOI: 10.1017/jfm.2019.684,
[Online-Edition: https://doi.org/10.1017/jfm.2019.684],
[Artikel]

Postulka, Niels ; Striegel, Andreas ; Krausse, Marcel ; Mager, Dario ; Spiehl, Dieter ; Meckel, Tobias ; Worgull, Matthias ; Biesalski, Markus (2018):
Combining wax printing with hot embossing for the design of geometrically well-defined microfluidic papers.
11, In: ACS Applied Materials & Interfaces, (4), ACS Publications, S. 4578-4587, ISSN 1944-8244, DOI: 10.1021/acsami.8b18133,
[Online-Edition: https://doi.org/10.1021/acsami.8b18133],
[Artikel]

Bier, Lukas ; Joisten, Philip ; Abendroth, Bettina (2018):
Warum nutzt der Mensch bevorzugt das Auto als Verkehrsmittel? Eine Analyse zum erlebten Fahrspaß unterschiedlicher Verkehrsmittelnutzer.
73, In: Zeitschrift für Arbeitswissenschaft, (1), Springer Berlin Heidelberg, S. 58-68, ISSN 0340-2444, [Online-Edition: https://link.springer.com/article/10.1007/s41449-018-00144-9],
[Artikel]

Bier, Lukas ; Wolf, Philipp ; Hilsenbek, Hanna ; Abendroth, Bettina (2018):
How to measure monotony-related fatigue? A systematic review of fatigue measurement methods for use on driving tests.
In: Theoretical Issues in Ergonomics Science, Taylor & Francis, ISSN 1464-536X, DOI: 10.1080/1463922X.2018.1529204,
[Online-Edition: https://doi.org/10.1080/1463922X.2018.1529204],
[Artikel]

Greifenstein, M. ; Hermann, J. ; Boehm, B. ; Dreizler, A. (2018):
Flame-cooling air interaction in an effusion-cooled model gas turbine combustor at elevated pressure.
60, In: Experiments in Fluids, (1), Springer, S. 10, ISSN 1432-1114, DOI: 10.1007/s00348-018-2656-3,
[Online-Edition: https://doi.org/10.1007/s00348-018-2656-3],
[Artikel]

Bremm, Sophia ; Hell, Sascha ; Becker, Wilfried (2018):
Convergence properties of the enriched Scaled Boundary Finite Element Method in fracture mechanics.
18, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), S. e201800194, DOI: 10.1002/pamm.201800194,
[Artikel]

Dölling, Sebastian ; Hell, Sascha ; Becker, Wilfried (2018):
Investigation of the laminate free-edge effect by means of the scaled boundary finite element method.
18, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), S. e201800129, DOI: 10.1002/pamm.201800129,
[Artikel]

Felger, Julian ; Becker, Wilfried (2018):
A modified plate model for an efficient analytical treatment of stress concentrations at notches.
18, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), S. e201800133, DOI: 10.1002/pamm.201800133,
[Artikel]

Schreiber, P. ; Mittelstedt, C. (2018):
A holistic approach for local buckling of composite laminated beams under compressive load.
In: Archive of Applied Mechanics, (Online first), Springer, ISSN 0939-1533, DOI: 10.1007/s00419-018-1496-1,
[Artikel]

Altherr, Lena C. ; Brötz, N. ; Dietrich, Ingo ; Gally, Tristan ; Geßner, Felix ; Kloberdanz, Hermann ; Leise, Philipp ; Pelz, P. F. ; Schlemmer, Pia Dorothea ; Schmitt, Andreas (2018):
Resilience in Mechanical Engineering - A Concept for Controlling Uncertainty during Design, Production and Usage Phase of Load-Carrying Structures.
885, In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, S. 187-198, ISSN 1662-7482, [Online-Edition: https://www.scientific.net/AMM.885.187],
[Artikel]

Altherr, Lena C. ; Joggerst, Laura ; Leise, Philipp ; Pfetsch, Marc E. ; Schmitt, Andreas ; Wendt, Janine (2018):
On Obligations in the Development Process of Resilient Systems with Algorithmic Design Methods.
885, In: Applied Mechanics and Materials, Trans Tech Publications, S. 240-252, ISSN 1660-9336, [Online-Edition: https://www.scientific.net/AMM.885.240],
[Artikel]

Altherr, Lena C. ; Leise, Philipp ; Pfetsch, Marc E. ; Schmitt, Andreas (2018):
Algorithmic Design and Resilience Assessment of Energy Efficient High-Rise Water Supply Systems.
885, In: Applied Mechanics and Materials, Trans Tech Publications, S. 211-223, ISSN 1660-9336, [Online-Edition: https://www.scientific.net/AMM.885.211],
[Artikel]

Gally, Tristan ; Kuttich, Anja ; Pfetsch, Marc E. ; Schaeffner, Maximilian ; Ulbrich, Stefan (2018):
Optimal Placement of Active Bars for Buckling Control in Truss Structures under Bar Failures.
885, In: Applied Mechanics and Materials, Trans Tech Publications, S. 119-130, ISSN 1660-9336, [Online-Edition: https://www.scientific.net/AMM.885.119],
[Artikel]

Kolvenbach, Philip ; Ulbrich, Stefan ; Krech, Martin ; Groche, Peter (2018):
Robust Design of a Smart Structure under Manufacturing Uncertainty via Nonsmooth PDE-Constrained Optimization.
885, In: Applied Mechanics and Materials, Trans Tech Publications, S. 131-144, ISSN 1660-9336, [Online-Edition: https://www.scientific.net/AMM.885.131],
[Artikel]

Eßer, Arved ; Kohnhäuser, F. ; Ostern, N. ; Engleson, K. ; Rinderknecht, Stephan (2018):
Enabling a Privacy-Preserving Synthesis of Representative Driving Cycles from Fleet Data using Data Aggregation.
In: 2018 21st International Conference on Intelligent Transportation Systems (ITSC), S. 1384-1389, [Online-Edition: https://ieeexplore.ieee.org/document/8569429],
[Artikel]

Prell, Bastian ; Stoldt, Johannes ; Putz, Matthias ; Schlüter, Peter ; Szabo, Andrei ; Bergs, Christoph ; Unterberger, Eric ; Reihnhart, Gunther ; Moog, Daniel ; Flum, Dominik ; Abele, Eberhard Simulation von Steuerungsmaßnahmen zum energieflexiblen Fabrikbetrieb.
24, In: Tagungsband, Vernetzt planen und produzieren – Smarte Produktion und digitale Vernetzung, Chemnitz, Technische Universität Chemnitz, S. 79-88, ISSN 0947-2495, [Artikel]

Ritter, Bastian ; Schmitz, Christian ; Pelz, P. F. (2018):
Control-orientated modelling and state estimation of tidal turbines with pitch control.
In: Proceedings of the 20th International Seminar on Hydropower Plants, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180927_C...],
[Artikel]

Schmitz, Christian ; Studenroth, Marcel ; Pelz, P. F. (2018):
Optimal operation of turbine cascades in tidal flows.
In: Proceedings of the 20th International Seminar on Hydropower Plants, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180926_O...],
[Artikel]

De Maleprade, Helene ; Soto, Dan ; Quéré, David ; Hinch, E. John ; Baier, Tobias ; Schür, Maximilian T. ; Hardt, Steffen (2018):
Air-propelled, herringbone-textured platelets.
3, In: Physical Review Fluids, (104101), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.3.104101,
[Online-Edition: https://link.aps.org/doi/10.1103/PhysRevFluids.3.104101],
[Artikel]

Müller, Andreas ; Ogrizek, Markus ; Bier, Lukas ; Abendroth, Bettina (2018):
Design concept for a visual, vibrotactile and acoustic take-over request in a conditional automated vehicle during non-driving-related tasks.
In: DDI, S. 12-21, [Online-Edition: http://ddi2018.org/wp-content/uploads/2018/10/DDI2018_Procee...],
[Artikel]

Pelz, P. F. ; Taubert, Paul (2018):
Vortex-Induced Transient Stall.
In: Archive of Applied Mechanics, Springer, S. 1-6, ISSN 1432-0681, DOI: 10.1007/s00419-018-1468-5,
[Online-Edition: https://link.springer.com/article/10.1007/s00419-018-1468-5],
[Artikel]

Meng, Xiannan ; Wang, Yongqi ; Feng, Feng ; Wang, Chun ; Zhou, Yunlai (2018):
Granular flows in a rotating drum and on an inclined plane: Analytical and numerical solutions.
30, In: Physics of Fluids, (10), S. 106605, ISSN 1070-6631, DOI: 10.1063/1.5045308,
[Online-Edition: https://doi.org/10.1063/1.5045308],
[Artikel]

Meyer, Tobias ; Li, Pu ; Lu, Daixing ; Schweizer, Bernhard (2018):
Implicit co-simulation method for constraint coupling with improved stability behavior.
44, In: Multibody System Dynamics, (2), S. 135-161, ISSN 1573-272X, [Artikel]

Souza, J. ; Großmann, A. ; Mittelstedt, C. (2018):
Micromechanical analysis of the effective properties of lattice structures in additive manufacturing.
In: Additive Manufacturing, (23), Elsevier, S. 53-69, ISSN 2214-8604, DOI: 10.1016/j.addma.2018.07.007,
[Artikel]

Weber, Thomas ; Strobel, Nina ; Kohne, Thomas ; Wolber, Jakob ; Abele, Eberhard (2018):
Realistic Modeling of a Combined Heat and Power Plant in the Context of Mixed Integer Linear Programming.
1, In: Proceedings, 7th DACH + Conference on Energy Informatics, (1), S. 27, ISSN 2520-8942, DOI: 10.1186/s42162-018-0037-z,
[Online-Edition: https://doi.org/10.1186/s42162-018-0037-z],
[Artikel]

Heindel, Stefan ; Müller, P.C. ; Rinderknecht, Stephan (2018):
Unbalance and resonance elimination with active bearings on general rotors.
431, In: Journal of Sound and Vibration, S. 422-440, DOI: 10.1016/j.jsv.2017.07.048,
[Artikel]

Altherr, Lena C. ; Ederer, T. ; Pfetsch, Marc E. ; Pelz, P. F. (2018):
Maschinelles Design eines optimalen Getriebes.
120, In: ATZ - Automobiltechnische Zeitschrift (2018), (10), S. 72-77, DOI: 10.1007/s35148-018-0131-3,
[Online-Edition: https://link.springer.com/content/pdf/10.1007%2Fs35148-018-0...],
[Artikel]

Schänzle, C. ; Corneli, T. ; Pelz, P. F. (2018):
A similarity based efficiency model of spindle screw pumps.
In: International Conference on Screw Machines (ICSM) 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180717_I...],
[Artikel]

Schänzle, C. ; Störmer, Nils ; Pelz, P. F. (2018):
Modeling the efficiency of external gear pumps based on similarity considerations.
In: Symposium on Fluid Power and Motion Control (FPMC) 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180625_F...],
[Artikel]

Baier, Tobias ; Tiwari, Sudarshan ; Shrestha, Samir ; Klar, Axel ; Hardt, Steffen (2018):
Thermophoresis of Janus particles at large Knudsen numbers.
3, In: Physical Review Fluids, (094202), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.3.094202,
[Online-Edition: https://link.aps.org/doi/10.1103/PhysRevFluids.3.094202],
[Artikel]

Schmitz, Christian ; Krämer, D. ; Pelz, P. F. (2018):
Multipole optimization of turbine arrays in tidal flows.
In: 29th IAHR Symposium on Hydraulic Machinery and Systems, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180723_M...],
[Artikel]

Adams, Christian ; Bös, Joachim ; Slomski, Elena Maja ; Melz, Tobias (2018):
Scaling laws obtained from a sensitivity analysis and applied to thin vibrating structures.
110, In: Mechanical Systems and Signal Processing, Elsevier, S. 590-610, ISSN 0888-3270, DOI: 10.1016/j.ymssp.2018.03.032,
[Artikel]

Smarsly, Emanuel ; Daume, Dominik ; Braig, Felix ; Koser, Silke ; Dörsam, Edgar ; Bunz, Uwe H. F. (2018):
Poly(para-phenyleneethynylene)s as emtters in polymer LEDs.
6, In: Journal of Materials Chemistry C, (41), The Royal Society of Cemistry, S. 11002-11006, ISSN 2050-7534, DOI: 10.1039/C8TC03848A,
[Online-Edition: http://www.rsc.org/journals-books-databases/about-journals/j...],
[Artikel]

May, Jan ; Alobaid, Falah ; Ohlemüller, Peter ; Stroh, Alexander ; Ströhle, Jochen ; Epple, Bernd (2018):
Reactive two–fluid model for chemical–looping combustion – Simulation of fuel and air reactors.
76, In: International Journal of Greenhouse Gas Control, S. 175-192, ISSN 17505836, DOI: 10.1016/j.ijggc.2018.06.023,
[Online-Edition: https://doi.org/10.1016/j.ijggc.2018.06.023],
[Artikel]

Friesen, John ; Rausch, L. ; Pelz, P. F. ; Fürnkranz, Johannes (2018):
Determining Factors for Slum Growth with Predictive Data Mining Methods.
2, In: Urban Science, (3), S. 81, DOI: 10.3390/urbansci2030081,
[Online-Edition: http://www.mdpi.com/2413-8851/2/3/81],
[Artikel]

Karev, Artem ; De Broeck, Lara ; Hagedorn, Peter (2018):
Some remarks on parametric excitation in circulatory systems.
18, In: PAMM, (1), WILEY-VCH Verlag, ISSN 1617-7061, DOI: 10.1002/pamm.201800061,
[Online-Edition: https://onlinelibrary.wiley.com/doi/10.1002/pamm.201800061],
[Artikel]

Kern, Alexander ; Borisov, Alexander ; Scheuermann, Dirk (2018):
Die Sichere Fernwartung.
In: Computer & Automation, (8), WEKA Fachmedien, S. 34-37, [Online-Edition: https://www.computer-automation.de/steuerungsebene/fernwirke...],
[Artikel]

Haaf, Martin ; Hilz, Jochen ; Helbig, Martin ; Weingärtner, Christoph ; Stallmann, Olaf ; Ströhle, Jochen ; Epple, Bernd (2018):
Assessment of the operability of a 20 MWth calcium looping demonstration plant by advanced process modelling.
75, In: International Journal of Greenhouse Gas Control, S. 224-234, ISSN 17505836, DOI: 10.1016/j.ijggc.2018.05.014,
[Online-Edition: https://doi.org/10.1016/j.ijggc.2018.05.014],
[Artikel]

Rinderknecht, Stephan ; Viehmann, Andreas ; Eßer, Arved (2018):
Innovative elektrifizierte Fahrzeugantriebe im Kontext der Realfahrtoptimierung.
In: Ingenieurspiegel, (August 2018), Public Verlagsgesellschaft, Bingen, S. 35-37, [Artikel]

Traub, Tilman ; Krech, Martin ; Groche, Peter (2018):
Profilierprozesse digitalisieren.
In: bbr - Bänder, Bleche, Rohre - Onlineausgabe, [Artikel]

Noll, Veronika ; Rinderknecht, Stephan ; Beckerle, Philipp (2018):
Systematic Experimental Assessment of a 2D-Motion Sensor to Detect Relative Movement between Residual Limb and Prosthetic Socket.
18, In: Sensors, (7), S. 2170, ISSN 1424-8220, DOI: 10.3390/s18072170,
[Online-Edition: https://doi.org/10.3390/s18072170],
[Artikel]

Pelz, P. F. ; Kuhr, Maximilian (2018):
Interface instability of an inelastic normal collision.
In: Archive of Applied Mechanics, Springer Berlin Heidelberg, DOI: 10.1007/s00419-018-1420-8,
[Online-Edition: https://link.springer.com/article/10.1007/s00419-018-1420-8?...],
[Artikel]

Pelz, P. F. ; Cloos, F.-J. ; Sieber, Jörg (2018):
Energetic assessment of an embedded aircraft propulsion: an analytic approach.
In: Archive of Applied Mechanics, Springer Berlin Heidelberg, DOI: 10.1007/s00419-018-1417-3,
[Online-Edition: https://link.springer.com/article/10.1007/s00419-018-1417-3?...],
[Artikel]

König, Christina ; Schönmann, René ; Stockinger, Christopher (2018):
Digitalisierung von Kommunikationsprozessen im SPNV.
In: Eisenbahntechnische Rundschau, S. 2-6, [Artikel]

Weitzel, Timm ; Schneider, Maximilian ; Glock, C. H. ; Löber, Florian ; Rinderknecht, Stephan (2018):
Operating a Storage-Augmented Hybrid Microgrid Considering Battery Aging Costs.
188, In: Journal of Cleaner Production, Elsevier B.V., S. 638-654, ISSN 0959-6526, DOI: 10.1016/j.jclepro.2018.03.296,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S095965261...],
[Artikel]

Rolfe, A. ; Huang, Y. ; Haaf, M. ; Rezvani, S. ; MclIveen-Wright, D. ; Hewitt, N.J. (2018):
Integration of the calcium carbonate looping process into an existing pulverized coal-fired power plant for CO2 capture: Techno-economic and environmental evaluation.
222, In: Applied Energy, S. 169-179, ISSN 03062619, DOI: 10.1016/j.apenergy.2018.03.160,
[Online-Edition: https://doi.org/10.1016/j.apenergy.2018.03.160],
[Artikel]

Shen, Ye ; Rinderknecht, Stephan (2018):
A method on modelling and analyzing the power losses in vehicle transmission.
82, In: Forschung im Ingenieurwesen, (467), Springer, ISSN 0015-7899 (Print) 1434-0860 (Online), [Online-Edition: https://link.springer.com/journal/10010],
[Artikel]

Abele, Eberhard (2018):
Standardisierte Schnittstellen sind ein Muss.
In: Fertigungstechnik, Sonderausgabe: Smarte Zerspannung, x-technik, Wilhering, S. 40, [Artikel]

Schäfer, Julian ; Fernandes, Felipe ; Dörsam, Edgar (2018):
Robust Fourier-based Focusing method for post-press inspection.
7, In: Journal of Print and Media Technology, (2), The International Association of Research Organizations for the Information, Media and Graphic Arts Indudtries, S. 57 -66, ISSN 2414-6250 (Online), 2223-8905 (Print), DOI: 10.14622/JPMTR-1809,
[Online-Edition: http://www.iarigai.org],
[Artikel]

Schmidt, Deborah ; Lenzen, Bernd ; Beidl, Christian (2018):
RDE-Analyse aktueller Dieselfahrzeuge.
79, In: MTZ - Motortechnische Zeitschrift, (7-8), Springer, S. 28-35, ISSN 2192-8843, [Artikel]

Wang, Yongqi ; Hutter, Kolumban (2018):
Phenomenological Thermodynamics of Irreversible Processes.
20, In: Entropy, (6), S. 479, ISSN 1099-4300, DOI: 10.3390/e20060479,
[Online-Edition: https://doi.org/10.3390/e20060479],
[Artikel]

Haag, Sebastian ; Bauerdick, Christoph ; Campitelli, Alessio ; Anderl, Reiner ; Abele, Eberhard ; Schebek, Liselotte (2018):
A Framework for Self-Evaluation and Increase of Resource-Efficient Production through Digitalization.
72, In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 850-855, ISSN 2212-8271, DOI: 10.1016/j.procir.2018.03.304,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S221282711...],
[Artikel]

Mann, Arne ; Groche, Peter (2018):
Joint Mechanisms of the Collar-Connection-Element.
6, In: International Journal of Materials, Mechanics and Manufacturing, (3), S. 229-232, DOI: 10.18178/ijmmm.2018.6.3.381,
[Artikel]

Schmitt, Andreas ; Schreiber, Martin ; Peixoto, Pedro ; Schäfer, Michael (2018):
A numerical study of a semi-Lagrangian Parareal method applied to the viscous Burgers equation.
19, In: Computing and Visualization in Science, (1), S. 45-57, ISSN 1433-0369, DOI: 10.1007/s00791-018-0294-1,
[Online-Edition: https://doi.org/10.1007/s00791-018-0294-1],
[Artikel]

Vascellari, M. ; Messig, D. ; Scholtissek, A. ; Hasse, C. ; Xia, M. ; Fiorina, B. ; Darabiha, N. (2018):
Experimental and numerical investigation of a stagnation pulverised coal flame.
In: Proc. Combust. Inst., DOI: 10.1016/j.proci.2018.05.141,
[Online-Edition: https://doi.org/10.1016/j.proci.2018.05.141],
[Artikel]

von Pyschow, Christian ; Beidl, Christian ; Geisselmann, Andreas (2018):
Minimierung der Realemissionen von schweren Nutzfahrzeugen – Abgasnachbehandlungssysteme und Gesetzgebung.
90, In: Chemie Ingenieur Technik, (6), WILEY-VCH, S. 774-782, ISSN 0009-286X, [Artikel]

Hedrich, P. ; Lenz, Eric ; Pelz, P. F. (2018):
Minimierung von Kinetose beim autonomen Fahren.
120, In: ATZ - Automobiltechnische Zeitschrift, (7-8), S. 70-75, DOI: 10.1007/s35148-018-0077-5,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180713_M...],
[Artikel]

Hedrich, P. ; Lenz, Eric ; Pelz, P. F. (2018):
Minimizing of Kinetosis during Autonomous Driving.
120, In: ATZ Woldwide, (7-8), S. 68-75, DOI: 10.1007/s38311-018-0081-0,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180713_M...],
[Artikel]

Pourmoghaddam, Navid ; Schneider, Jens (2018):
Determination of the engine power for quenching of glass by forced convection: simplified model and experimental validation of residual stress levels.
In: Glass Structures and Engineering, DOI: 10.1007/s40940-018-0078-5,
[Online-Edition: https://doi.org/10.1007/s40940-018-0078-5],
[Artikel]

Lenz, Eric ; Hedrich, P. ; Pelz, P. F. (2018):
Aktive Luftfederung – Modellierung, Regelung und Hardware-in-the-Loop-Experimente.
82, In: Forschung in Ingenieurwesen, (3), S. 1-15, ISSN 0015-7899, DOI: 10.1007/s10010-018-0272-2,
[Online-Edition: https://link.springer.com/article/10.1007/s10010-018-0272-2],
[Artikel]

Neubauer, Philipp ; Tschesche, Johannes ; Bös, Joachim ; Melz, Tobias ; Hanselka, Holger (2018):
An active-system approach for eliminating the wolf note on a cello.
Vol. 143, In: Journal of the Acoustical Society of America (JASA), (No. 5), S. 2965-2974, ISSN 0001-4966, DOI: 10.1121/1.5037467,
[Artikel]

Noll, Veronika ; Neuheuser, K. ; Schumacher, C. ; Blab, F. ; Ziegenspeck, N. ; Kleiner, B. ; Schneider, U. ; Seyfarth, A. ; Beckerle, Philipp (2018):
Messtechnische Erfassung der Stumpf-Schaft-Interaktion.
Mai 2018, In: Orthopädie Technik, S. 88-94, [Artikel]

Reis, M. C. ; Sousa, M. F. B. ; Alobaid, F. ; Bertran, C. A. ; Wang, Y. (2018):
A two-fluid model for calcium carbonate precipitation in highly supersaturated solutions.
29, In: Advanced Powder Technology, S. 1571-1581, ISSN 09218831, DOI: 10.1016/j.apt.2018.03.022,
[Online-Edition: https://doi.org/10.1016/j.apt.2018.03.022],
[Artikel]

Groß, T. F. ; Pelz, P. F. (2018):
Axiomatisches Modell für die Bildung von freiem Gas in Hydrauliksystemen.
In: O+P – Ölhydraulik und Pneumatik, [Online-Edition: https://digital.oup-fluidtechnik.de/o-p-fluidtechnik-4-2018/...],
[Artikel]

Bettenbühl, Pia ; König, Christina (2018):
Ambiguitätstoleranz. Veränderungen in einer widersprüchlichen Welt.
In: Changement, S. 15-19, [Artikel]

Bilgic Istoc, Sami ; Winner, H. (2018):
Heat Cracks in Brake Discs for Heavy Vehicles.
In: Automotive and Engine Technology, Springer International Publishing, S. 1-8, ISSN 2365-5127, DOI: s41104-018-0027-y,
[Online-Edition: https://doi.org/10.1007/s41104-018-0027-y],
[Artikel]

Leise, Philipp ; Altherr, Lena C. ; Pelz, P. F. (2018):
Technical Operations Research (TOR) - Algorithms, not Engineers, Design Optimal Energy Efficient and Resilient Cooling Systems.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_T...],
[Artikel]

Ludwig, G. ; Taubert, Paul ; Pelz, P. F. (2018):
The Role of Universities Within the Qualification and Verification Process of EuP Requirements for Turbomachines using the Example of Rotodynamics Pumps.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_T...],
[Artikel]

Pelz, P. F. ; Saul, Sebastian ; Doberstein, Christopher (2018):
Extended Rankine-Betz Theory for Design of Tunnel Ventilation Systems.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_E...],
[Artikel]

Preuß, N. ; Pelz, P. F. (2018):
Integrated Management of Experimental Research- and Meta-Data for Fan Test Rigs.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_I...],
[Artikel]

Saul, Sebastian ; Matyschok, B. ; Pelz, P. F. (2018):
Fan Model Test at Varying Ambient Pressure - Efficient Product Validation at Full Scale Reynolds and Mach Number.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_F...],
[Artikel]

Saul, Sebastian ; Pelz, P. F. (2018):
Extended Scaling Method for Nonsimilarity in Reynolds Number, Stagger Angle and Blade Number.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_E...],
[Artikel]

Schmitz, Christian ; Nakhjiri, M. ; Pelz, P. F. (2018):
Softsensor for the characterisation of the process fluid.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_S...],
[Artikel]

Taubert, Paul ; Pelz, P. F. (2018):
Structure and Kinematics of the Vortex System in Axial Turbomachines.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_S...],
[Artikel]

Pelz, P. F. ; Dietrich, Ingo ; Schänzle, C. ; Preuß, N. (2018):
Towards digitalization of hydraulic systems using soft sensor networks.
In: 11th International Fluid Power Conference, S. 40-53, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_A...],
[Artikel]

Heinrich, A. ; Ries, F. ; Kuenne, G. ; Ganter, S. ; Hasse, C. ; Sadiki, A. ; Janicka, J. (2018):
Large Eddy Simulation with tabulated chemistry of an experimental sidewall quenching burner.
71, In: International Journal of Heat and Fluid Flow, S. 95-110, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2018.03.011,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.03.011],
[Artikel]

Eßer, Arved ; Zeller, M. ; Foulard, Stéphane ; Rinderknecht, Stephan (2018):
Stochastic Synthesis of Representative and Multidimensional Driving Cycles.
7, In: SAE International Journal of Alternative Powertrains, (3), S. 263-272, ISSN 2167-4205, [Online-Edition: https://doi.org/10.4271/2018-01-0095],
[Artikel]

Shen, Ye ; Liu, Zhihong ; Rinderknecht, Stephan (2018):
Modelling of Power Losses of Transmission Synchronizers in Neutral Position.
2018-01-1228, In: SAE Technical Paper, [Online-Edition: https://saemobilus.sae.org/content/2018-01-1228],
[Artikel]

Hermann, J. ; Kühn, T. ; Mittelstedt, S. ; Mittelstedt, C. (2018):
A higher order shear deformation approach to the local buckling behaviour of moderately thick composite laminated beams.
18, In: International Journal of Structural Stability and Dynamics, (11), World Scientific Publishing, S. 1850139, ISSN 0219-4554, [Online-Edition: https://doi.org/10.1142/S0219455418501390],
[Artikel]

Alobaid, Falah ; Al-Maliki, Wisam Abed Kattea ; Lanz, Thomas ; Haaf, Martin ; Brachthäuser, Andreas ; Epple, Bernd ; Zorbach, Ingo (2018):
Dynamic simulation of a municipal solid waste incinerator.
149, In: Energy, S. 230-249, ISSN 03605442, DOI: 10.1016/j.energy.2018.01.170,
[Online-Edition: https://doi.org/10.1016/j.energy.2018.01.170],
[Artikel]

Brötz, N. ; Hedrich, P. ; Pelz, P. F. (2018):
Integrated Fluid Dynamic Vibration Absorber for Mobile Applications.
In: 11th International Fluid Power Conference, (1), S. 14-24, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_I...],
[Artikel]

Hedrich, P. ; Lenz, Eric ; Brötz, N. ; Pelz, P. F. (2018):
Active Pneumatic Suspension for Future Autonomous Vehicles: Design, Prove of Concept and Hardware-in-the-Loop Simulations.
In: 11th International Fluid Power Conference, (3), S. 352-365, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_A...],
[Artikel]

Preuß, N. ; Schänzle, C. ; Pelz, P. F. (2018):
Accumulators with sorbent material – an innovative approach towards size and weight reduction.
In: 11th International Fluid Power Conference, S. 504-517, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_A...],
[Artikel]

Terwort, A. ; Groß, T. F. ; Pelz, P. F. (2018):
Bubble nucleation in hydraulic systems.
In: 11th International Fluid Power Conference, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_B...],
[Artikel]

Baumann, Sebastian ; Klingauf, Uwe ; Preusche, Christian (2018):
Einsatz von Machine Learning für die Effizienzbewertung von Flugzeugen.
März 2018, In: Ingenieurspiegel | Maschinenbau, Public Verlagsgesellschaft, Bingen, S. 62-64, [Artikel]

Plöger, Daniel Fritz ; Zech, Philipp ; Rinderknecht, Stephan (2018):
Vibration Signature Analysis of Commodity Planetary Gearboxes.
In: Mechanical Systems and Signal Processing, (119), S. 255-265, ISSN 0888-3270, [Online-Edition: https://www.journals.elsevier.com/mechanical-systems-and-sig...],
[Artikel]

Friesen, John ; Taubenböck, H. ; Wurm, Michael ; Pelz, P. F. (2018):
The similar size of slums.
In: Habitat International, (73), S. 79-88, DOI: 10.1016/j.habitatint.2018.02.002,
[Online-Edition: https://doi.org/10.1016/j.habitatint.2018.02.002],
[Artikel]

Heidl, M. ; Boespflug, A. ; Wakula, Jurij (2018):
Evaluierung von fünf Screening-Bewertungsverfahren für repetitive physische Belastungen anhand des subjektiven Belastungsempfindens der Arbeitspersonen in der Montage der Automobil-Zulieferindustrie.
In: Zeitschrift für Arbeitswissenschaft, Springer, DOI: 10.1007/s41449-018-0096-9,
[Artikel]

Meyer, Tobias ; Li, Pu ; Lu, Daixing ; Schweizer, Bernhard (2018):
Higher-Order Index-1 Co-Simulation Approach: Solver Coupling for Multibody Systems.
17, In: Proceedings in Applied Mathematics and Mechanics (PAMM), (1), John Wiley and Sons, S. 155-156, ISSN 1617-7061, [Artikel]

Münz, Markus ; Mokros, Alexander ; Töpfer, David ; Beidl, Christian (2018):
OME - Partikelbewertung unter Realfahrbedingungen.
79, In: MTZ - Motortechnische Zeitschrift, (3), Springer, S. 16-21, ISSN 2192-8843, [Artikel]

Runte, Saskia ; Putz, Hans-Joachim ; Schabel, Samuel (2018):
Digitale Druckprodukte im zweistufigen Deinkingprozess : Deinkingverhalten und Modellierung der optischen Eigenschaften.
146, In: Wochenblatt für Papierfabrikation, (1), S. 26-33, [Artikel]

Rausch, L. ; Friesen, John ; Altherr, Lena ; Meck, Marvin ; Pelz, P. F. (2018):
A Holistic Concept to Design Optimal Water Supply Infrastructures for Informal Settlements Using Remote Sensing Data.
10, In: Remote Sensing 2018, (2), MDPI, ISSN 2072-4292, DOI: 10.3390/rs10020216,
[Online-Edition: http://www.mdpi.com/2072-4292/10/2/216/pdf],
[Artikel]

Martin, Georg ; Schork, Stefan ; Vogel, Sven ; Kirchner, Eckhard (2018):
MME – Potentiale durch mechatronische Maschinenelemente.
70, In: Konstruktion, (01-02), Springer-VDI-Verlag GmbH & Co. KG, S. 71-75, ISSN 0720-5953, [Online-Edition: https://www.konstruktion-online.de/2018/Ausgabe-01-02/Praxis...],
[Artikel]

Plöger, Daniel Fritz ; Zech, Philipp ; Rinderknecht, Stephan (2018):
Real-Time Order Tracking of Gear Mesh Vibration in High Speed Planetary Gearboxes.
Volume 148, 2018, In: MATEC Web of Conferences, DOI: 10.1051/matecconf/201814811002,
[Artikel]

Rinderknecht, Stephan (2018):
Gesamtsystem als Schlüssel zur E-Mobilität.
In: ATZ - Automobiltechnische Zeitschrift, (2), S. 82, ISSN 0001-2785, [Online-Edition: https://www.springerprofessional.de/atz-automobiltechnische-...],
[Artikel]

Schäfer, Stefan ; Groche, Peter ; Lange, Jörg ; Reising, Jakob ; Moneke, Matthias ; Grimm, Sören (2018):
Flächentragwerke aus gekrümmten Sandwichelementen.
In: DETAIL Online, DETAIL Verlag München, [Online-Edition: https://www.detail.de/artikel/flaechentragwerke-aus-gekruemm...],
[Artikel]

Bender, Achim ; Hänichen, Philipp ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2018):
Modeling Crystallization and Heat Transfer in an Evaporating Urea-Water Drop.
In: IHTC 16 - International Heat Transfer Conference 16 Digital Libary, August 10-15, Beijing, China, Begellhouse, ISSN 2377-424X, DOI: 10.1615/IHTC16,
[Online-Edition: http://dx.doi.org/10.1615/IHTC16.mpf.022242],
[Artikel]

Zöller, Ilka ; Bechmann, Roman ; Abendroth, Bettina (2018):
Possible applications for gestures while driving.
In: Automotive and Engine Technology, S. 1-10, ISSN 2365-5127, [Online-Edition: https://doi.org/10.1007/s41104-017-0023-7],
[Artikel]

Hilz, Jochen ; Helbig, Martin ; Haaf, Martin ; Daikeler, Alexander ; Ströhle, Jochen ; Epple, Bernd (2018):
Investigation of the fuel influence on the carbonate looping process in 1 MWth scale.
169, In: Fuel Processing Technology, S. 170-177, ISSN 03783820, DOI: 10.1016/j.fuproc.2017.09.016,
[Online-Edition: https://doi.org/10.1016/j.fuproc.2017.09.016],
[Artikel]

Hunger, F. ; Dietzsch, F. ; Gauding, M. ; Hasse, C. (2018):
A priori analysis of differential diffusion for model development for scale-resolving simulations.
3, In: Phys. Rev. Fluids, American Physical Society, S. 014601, DOI: 10.1103/PhysRevFluids.3.014601,
[Online-Edition: https://link.aps.org/doi/10.1103/PhysRevFluids.3.014601],
[Artikel]

Preußer, Niklas ; Rieks, Sebastian ; Kenig, Eugeny Y. ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2018):
Transport Processes and Separation in Zero-Gravity Destillation.
In: IHTC 16 - International Heat Transfer Conference 16 Digital Libary, August 10-15, Beijing, China, Begellhouse, ISSN 2377-424X, DOI: 10.1615/IHTC16.her.023300,
[Online-Edition: http://dx.doi.org/10.1615/IHTC16.her.023300],
[Artikel]

Stroh, Alexander ; Alobaid, Falah ; von Bohnstein, Maximilian ; Ströhle, Jochen ; Epple, Bernd (2018):
Numerical CFD simulation of 1 MWth circulating fluidized bed using the coarse grain discrete element method with homogenous drag models and particle size distribution.
169, In: Fuel Processing Technology, S. 84-93, ISSN 03783820, DOI: 10.1016/j.fuproc.2017.09.014,
[Online-Edition: https://doi.org/10.1016/j.fuproc.2017.09.014],
[Artikel]

Weise, S. ; Popp, S. ; Messig, D. ; Hasse, C. (2018):
A Computationally Efficient Implementation of Tabulated Combustion Chemistry based on Polynomials and Automatic Source Code Generation.
100, In: Flow, Turbulence and Combustion, (1), S. 119-146, ISSN 1573-1987, DOI: 10.1007/s10494-017-9826-x,
[Online-Edition: https://doi.org/10.1007/s10494-017-9826-x],
[Artikel]

Abele, Eberhard (2018):
WGP – Sprachrohr der Produktionswissenschaft.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 1, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Ali, Fares ; Bretz, Andreas ; Lorenz, Imke ; Schulte, Fiona ; Sperling, Ann ; Tichi, Benedikt (2018):
Einsatz von CFK-Komponenten in Werkzeugmaschinen - Entwicklung eines Schlittens einer Portalfräsmaschine.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (10), S. 718-723, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Baier, Christian ; Tepper, Cornelia (2018):
Zerspanung mit Industrierobotern.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (6), S. 429-435, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Berger, Matthias ; Ali, Fares (2018):
Auszugverhalten von Schaftfräsern.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (5), S. 353-358, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Dohnal, Fadi ; Feulner, Michael ; Sielaff, Tilo ; Daume, Christian (2018):
Numerical Investigation of Chatter Suppression via Parametric Anti-Resonance in a Motorized Spindle unit During Milling.
12, In: Production Engineering : WGP, Springer Verlag, Heidelberg, (Issue 3-4), S. 309-317, ISSN 0944-6524, [Online-Edition: https://doi.org/10.1007/s11740-018-0789-0],
[Artikel]

Abele, Eberhard ; Geßner, Felix (2018):
Spanungsquerschnittmodell zum Gewindebohren.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 2-6, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Heep, Thomas ; Bickert, Christian ; Pyttel, Brita ; Kirilov, Kiril (2018):
Additiv hergestellter Drehklemmhalter.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 100-106, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Lautenschläger, Nils (2018):
Laterale Pendelschwingungen beim Reiben.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 31-38, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Meinhard, Adrian ; Volz, Marcel (2018):
Null-Grat-Geometrie als Ziel.
151, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (12), S. 42-45, ISSN 0043-2792, [Artikel]

Abele, Eberhard ; Scherer, Timo ; Schmidt, Eric (2018):
Strukturoptimierte Zerspanungswerkzeuge.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (6), S. 435-440, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Scherer, Timo ; Schmidt, Eric (2018):
Strukturoptimierte Zerspanungswerkzeuge.
In: VDI-Z Integrierte Produktion, Springer VDI Verlag, Düsseldorf, (II), S. 55-58, [Artikel]

Abele, Eberhard ; Schützer, Klaus ; Güth, Sebastian ; Meinhard, Adrian (2018):
Deburring of Cross-Drilled Holes with Ball-End Cutters - Modeling the Tool Path.
12, In: Production Engineering : WGP, Springer Verlag, Heidelberg, S. 25-33, ISSN 0944-6524, DOI: 10.1007/s11740-017-0781-0,
[Artikel]

Abele, Eberhard ; Weber, Markus ; Daume, Christian (2018):
Spindelwälzlagerbelastung beim trochoiden Fräsen.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (10), S. 730-735, [Artikel]

Abele, Eberhard ; Weber, Thomas ; Flum, Dominik ; Panten, Niklas ; Sossenheimer, Johannes ; Fuertjes, Tobias (2018):
A Kalman-Filter-Based Disaggregation Approach for Sensor Reduced Energy Monitoring on Component Level of Machine Tools.
In: Proceedings, 14th International Conference on High Speed Machining, San Sebastian (Spain), [Artikel]

Adam, Marcel ; Kontermann, Christian ; Oechsner, Matthias (2018):
A study on failure of double-layer thermal barrier coatings subjected to uniaxial compression tests using acoustic emission analysis and digital image correlation.
In: Structural Integrity Procedia 13 (2018), S. 1226 – 1231. ISSN 2452-3216 <reviewed>, [Artikel]

Bakhshandeh Chamazkoti, Rohollah ; Oberlack, Martin (2018):
Geometry of two-point velocity correlation tensor of homogeneous isotropic turbulence with helicity in sol-manifold coordinates.
59, In: Journal of Mathematical Physics, (10), S. 103507, ISSN 0022-2488, DOI: 10.1063/1.5048802,
[Online-Edition: https://doi.org/10.1063/1.5048802],
[Artikel]

Barz, Dominik P. J. ; Scholz, Mathias ; Hardt, Steffen (2018):
Electrokinetic manipulation of the von Kármán vortex street in the wake of a confined cylinder. I. DC electric field.
30, In: Physics of Fluids, (8), S. 082004, ISSN 1070-6631, DOI: 10.1063/1.5037595,
[Online-Edition: https://doi.org/10.1063/1.5037595],
[Artikel]

Batzdorf, Stefan ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2018):
Direct Numerical Simulation of the Microscale Fluid Flow and Heat Transfer in the Three-Phase Contact Line Region During Evaporation.
140, In: Journal of Heat Transfer, (3), S. 032401-1, ISSN 00221481, DOI: 10.1115/1.4038191,
[Online-Edition: http://dx.doi.org/10.1115/1.4038191],
[Artikel]

Bauerdick, Christoph ; Helfert, Mark ; Petruschke, Lars ; Sossenheimer, Johannes ; Abele, Eberhard (2018):
An Automated Procedure for Workpiece Quality Monitoring Based on Machine Drive-Based Signals in Machine Tools.
72, In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 526-532, ISSN 2212-8271, DOI: 10.1016/j.procir.2018.03.245,
[Online-Edition: https://doi.org/10.1016/j.procir.2018.03.245],
[Artikel]

Beckerle, Philipp ; Kõiva, Risto ; Kirchner, Elsa Andrea ; Bekrater-Bodmann, Robin ; Dosen, Strahinja ; Christ, Oliver ; Abbink, David A. ; Castellini, Claudio ; Lenggenhager, Bigna (2018):
Feel-Good Robotics: Requirements on Touch for Embodiment in Assistive Robotics.
12, In: Frontiers in Neurorobotics, ISSN 1662-5218, DOI: 10.3389/fnbot.2018.00084,
[Online-Edition: https://doi.org/10.3389/fnbot.2018.00084],
[Artikel]

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2018):
Efficient approximate solutions for postbuckling of axially compressed orthotropic plates with rotationally restrained and free longitudinal edges.
88, In: Archive of Applied Mechanics, (3), Springer, S. 461-476, ISSN 0939-1533 (Print) 1432-0681 (Online), DOI: 10.1007/s00419-017-1319-9,
[Online-Edition: https://doi.org/10.1007/s00419-017-1319-9],
[Artikel]

Bender, Achim ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2018):
Numerical investigation of the evolution and breakup of an evaporating liquid film on a structured wall.
70, In: International Journal of Heat and Fluid Flow, S. 104 - 113, ISSN 0142-727X, DOI: 10.1016/j.ijheatfluidflow.2018.01.013,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.01.013],
[Artikel]

Bischoff, Lothar ; Stephan, Michael ; Birkel, Christina S. ; Litterscheid, Christian F. ; Dreizler, Andreas ; Albert, Barbara (2018):
Multiscale and luminescent, hollow microspheres for gas phase thermometry.
8, In: Scientific Reports, (1), Nature Publ. Group, ISSN 2045-2322, DOI: 10.1038/s41598-017-18942-2,
[Online-Edition: https://doi.org/10.1038/s41598-017-18942-2],
[Artikel]

Blinn, Bastian ; Klein, Marcus ; Gläßner, Christopher ; Smaga, Marek ; Aurich, Jan C. ; Beck, Tilmann (2018):
An investigation of the microstructure and fatigue behavior of additively manufactured AISI 316L stainless steel with regard to the influence of heat treatment.
In: Metals 8 (2018), 4, 220, 23 S. ISSN 2075-4701 <reviewed>, [Artikel]

Bosch, Eva ; Metternich, Joachim (2018):
Understanding and Assessing Complexity in Cutting Tool Management.
72, In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 1499-1504, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.03.108],
[Artikel]

Brandstetter, Christoph ; Juengst, Maximilian ; Schiffer, Heinz-Peter (2018):
Measurements of Radial Vortices, Spill Forward and Vortex Breakdown in a Transonic Compressor.
In: Journal of Turbomachinery, ISSN 0889-504X, DOI: 10.1115/1.4039053,
[Online-Edition: https://doi.org/10.1115/1.4039053],
[Artikel]

Brandstetter, Christoph ; Schiffer, Heinz-Peter (2018):
PIV measurements of the transient flow structure in the tip region of a transonic compressor near stability limit.
2, In: Journal of the Global Power and Propulsion Society, S. 303-316, ISSN 2515-3080, DOI: 10.22261/JGPPS.JYVUQD,
[Online-Edition: https://doi.org/10.22261/JGPPS.JYVUQD],
[Artikel]

Breitenbach, Jan ; Roisman, Ilia V. ; Tropea, Cameron (2018):
From drop impact physics to spray cooling models: a critical review.
59, In: Experiments in Fluids, (3), ISSN 0723-4864, DOI: 10.1007/s00348-018-2514-3,
[Online-Edition: https://doi.org/10.1007/s00348-018-2514-3],
[Artikel]

Breitenbach, Jan ; Roisman, Ilia V. ; Tropea, Cameron (2018):
Publisher Correction: From drop impact physics to spray cooling models: a critical review.
59, In: Experiments in Fluids, (5), ISSN 0723-4864, DOI: 10.1007/s00348-018-2535-y,
[Online-Edition: https://doi.org/10.1007/s00348-018-2535-y],
[Artikel]

Bretz, Andreas ; Geßner, Felix ; Öztürk, Tuğrul ; Rinn, Christian ; Abele, Eberhard (2018):
Adjustment of Axis Offset Errors during Reaming.
885, In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, S. 267-275, ISSN 1662-7482, [Online-Edition: https://www.scientific.net/AMM.885.267],
[Artikel]

Brilz, Michael ; Biehler, Jasmin ; Hoche, Holger ; Oechsner, Matthias (2018):
Development of a hydrogen absorption model to determine absorption kinetics and diffusion coefficients by means of carrier gas hot extraction. Short communication.
In: International Journal of Hydrogen Energy 43 (2018), S. 10496 – 10501 (available online: 9 May 2018). ISSN 0360-3199 <reviewed>, [Artikel]

Buhl, S. ; Hain, D. ; Hartmann, F. ; Hasse, C. (2018):
A comparative study of intake and exhaust port modeling strategies for scale-resolving engine simulations.
19, In: International Journal of Engine Research, (3), S. 282-292, DOI: 10.1177/1468087417707452,
[Online-Edition: https://doi.org/10.1177/1468087417707452],
[Artikel]

Busse, Alexander ; Lauer, Jonas ; Metternich, Joachim (2018):
Nutzenorientierter Einsatz digitaler Systeme zur Prozessüberwachung Implementierungsansatz zur Umsetzung " digitaler Services" in der Instandhaltung mit Hilfe maschinellen Lernens.
23, In: PRODUCTIVITY Management, GITO Verlag, Berlin, (1), S. 28-31, ISSN 1868-8519, [Artikel]

Bölling, Christian ; Abele, Eberhard (2018):
Simulation of Multi-Stage Fine Machining Processes at the Example of Valve Guide and Valve Seat.
885, In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, S. 255-266, ISSN 1662-7482, [Online-Edition: https://www.scientific.net/AMM.885.255],
[Artikel]

Bölling, Christian ; Hoppe, Florian ; Geßner, Felix ; Knoll, Maximilian ; Abele, Eberhard ; Groche, Peter (2018):
Fortpflanzung von Unsicherheit in Prozessketten.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 82-88, ISSN 1436-4980, [Artikel]

Chen, Longquan ; Bonaccurso, Elmar ; Gambaryan-Roisman, Tatiana ; Starov, Victor ; Koursari, Nektaria ; Zhao, Yapu (2018):
Static and dynamic wetting of soft substrates.
36, In: Current Opinion in Colloid & Interface Science, S. 46 - 57, ISSN 1359-0294, DOI: 10.1016/j.cocis.2017.12.001,
[Online-Edition: https://doi.org/10.1016/j.cocis.2017.12.001],
[Artikel]

Cheviakov, A.F. ; Heß, Julian (2018):
A symbolic computation framework for constitutive modelling based on entropy principles.
324, In: Applied Mathematics and Computation, S. 105-118, ISSN 00963003, DOI: 10.1016/j.amc.2017.12.004,
[Online-Edition: https://doi.org/10.1016/j.amc.2017.12.004],
[Artikel]

Cordes, U. ; Lambie, B. ; Hufnagel, K. ; Spiegelberg, H. ; Kampers, G. ; Tropea, C. (2018):
The Adaptive Camber Concept - A passive approach for gust load alleviation on wind turbines.
21, In: Wind Energy, (9), S. 732-744, ISSN 10954244, DOI: 10.1002/we.2190,
[Online-Edition: https://doi.org/10.1002/we.2190],
[Artikel]

Daikeler, Alexander ; Ströhle, Jochen ; Epple, Bernd (2018):
Experimental Flow Structure Analysis in a 1 MWth Circulating Fluidized Bed Pilot Plant.
In: Chemical Engineering Science, ISSN 00092509, DOI: 10.1016/j.ces.2018.10.037,
[Online-Edition: https://doi.org/10.1016/j.ces.2018.10.037],
[Artikel]

Debiagi, P. ; Gentile, G. ; Cuoci, A. ; Frassoldati, A. ; Ranzi, E. ; Faravelli, T. (2018):
Yield, Composition and Active Surface Area of Char from Biomass Pyrolysis.
65, In: Chemical Engineering Transactions, Italian Association of Chemical Engineering (AIDIC), S. 97-102, ISSN 1974-9791; 2283-9216, [Artikel]

Debiagi, P. ; Gentile, G. ; Cuoci, A. ; Frassoldati, A. ; Ranzi, E. ; Faravelli, T. (2018):
A predictive model of biochar formation and characterization.
134, In: Journal of analytical and applied pyrolysis, Elsevier, S. 326-335, ISSN 0165-2370, DOI: 10.1016/j.jaap.2018.06.022,
[Online-Edition: https://doi.org/10.1016/j.jaap.2018.06.022],
[Artikel]

Dejkun, Vitali ; Mischliwski, Stefan ; Abele, Eberhard ; Lorenz, Imke (2018):
Globale Oberflächenoptimierung beim Fräsen.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (7/8), S. 499-505, ISSN 1436-4980, [Artikel]

Dietrich, Ingo ; Hedrich, P. ; Bölling, Christian ; Brötz, N. ; Geßner, Felix ; Pelz, P. F. (2018):
Concept of a Resilient Process Chain to Control Uncertainty of a Hydraulic Actuator.
885, In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, S. 156-169, ISSN 1662-7482, [Online-Edition: https://www.scientific.net/AMM.885.156],
[Artikel]

Dietzsch, F. ; Scholtissek, A. ; Hunger, F. ; Hasse, C. (2018):
The impact of thermal diffusion on the structure of non-premixed flames.
194, In: Combust. Flame, S. 352-–362, DOI: 10.1016/j.combustflame.2018.05.018,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2018.05.018],
[Artikel]

Duarte de Araújo, Francisco ; Engler, Tom ; Andersohn, Georg ; Oechsner, Matthias ; Kaufmann, Heinz ; Schönborn, Steffen ; Melz, Tobias (2018):
Influence of salt corrosion on the fatigue behaviour of aluminium alloys for chassis components under constant and variable amplitude loading. – Einfluss von Salzkorrosion auf das Ermüdungsverhalten von Aluminiumlegierungen für Sicherheitsbauteile unter konstanten und variablen Amplituden.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 3, S. 273 – 286. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Eigenbrod, Michael ; Bihler, Florian ; Hardt, Steffen (2018):
Electrokinetics of a particle attached to a fluid interface: Electrophoretic mobility and interfacial deformation.
3, In: Physical Review Fluids, (10), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.3.103701,
[Online-Edition: https://doi.org/10.1103/PhysRevFluids.3.103701],
[Artikel]

Elsaß, Moritz ; Frommherz, Martin ; Oechsner, Matthias (2018):
The influence of the coating deposition process on the interdiffusion behavior between nickel-based superalloys and MCrAlY bond coats.
In: J. Therm.Spray Tech. 27 (2018), S. 379 – 390 (published online: 18 January 2018). ISSN 1544-1016 <reviewed>, [Artikel]

Emmert, Johannes ; Blume, Niels Göran ; Dreizler, Andreas ; Wagner, Steven (2018):
Data analysis and uncertainty estimation in supercontinuum laser absorption spectroscopy.
8, In: Scientific Reports, (1), ISSN 2045-2322, DOI: 10.1038/s41598-018-28705-2,
[Online-Edition: https://doi.org/10.1038/s41598-018-28705-2],
[Artikel]

Engler, Tom ; Andersohn, Georg ; Oechsner, Matthias ; Duarte de Araújo, Francisco ; Kaufmann, Heinz ; Melz, Tobias (2018):
Electrochemical characterization of automotive aluminium alloys regarding their corrosion fatigue behavior. – Bewertung der Anfälligkeit von Aluminiumlegierungen gegenüber Schwingungsrisskorrosion.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 3, S. 264 – 272. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Enke, Judith ; Glass, Rupert ; Kreß, Antonio ; Hambach, Jens ; Tisch, Michael ; Metternich, Joachim (2018):
Industrie 4.0 – Competencies for a Modern Production System.
23, In: Procedia Manufacturing, 8th CIRP Conference on Learning Factories, Patras (Greece), Elsevier B.V., S. 267-272, ISSN 2351-9789, [Online-Edition: https://doi.org/10.1016/j.promfg.2018.04.028],
[Artikel]

Enke, Judith ; Metternich, Joachim ; Bentz, Daniel ; Klaes, Paul-Jonas (2018):
Systematic Learning Factory Improvement Based on Maturity Level Assessment.
23, In: Procedia Manufacturing, Advanced Engineering Education & Training for Manufacturing Innovation, 8th CIRP Sponsored Conference on Learning Factories, Elsevier B.V., S. 51-56, DOI: 10.1016/j.promfg.2018.03.160,
[Artikel]

Flick, Dominik ; Kuschicke, Felix ; Schweikert, Marcelo ; Thiele, Thomas ; Panten, Niklas ; Thiede, Sebastian ; Herrmann, Christoph (2018):
Ascertainment of Energy Consumption Information in the Age of Industrial Big Data.
72, In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 202-208, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.03.122],
[Artikel]

Flum, Dominik ; Abele, Eberhard ; Reidel, Oliver (2018):
Model-Based Planning of Energy Flexible Technical building Services in Production Plants to Integrate Variable Renewable Energies.
69, In: Procedia CIRP, 25th CIRP Life Cycle Engineering Conference, Copenhagen (Denmark), Elsevier B.V., S. 354-359, ISSN 2212-8271, DOI: 10.1016/j.procir.2017.11.012,
[Online-Edition: https://doi.org/10.1016/j.procir.2017.11.012],
[Artikel]

Franke, Wilken ; Stein, Philipp ; Ackermann, Annika ; Groche, Peter (2018):
Paper forming with steam - Improved shape accuracy of deep-drawn paper products by steam.
1, In: Professional Papermaking, S. 34 - 35, [Artikel]

Frommater, S. ; Neumann, J. ; Hasse, C. (2018):
A phenomenological mixture homogenization model for spark-ignition direct-injection engines.
19, In: International Journal of Engine Research, (2), S. 168-178, DOI: 10.1177/1468087417711858,
[Online-Edition: https://doi.org/10.1177/1468087417711858],
[Artikel]

Gandía-Barberá, Sergio ; Hoyas, Sergio ; Oberlack, Martin ; Kraheberger, Stefanie (2018):
Letter: The link between the Reynolds shear stress and the large structures of turbulent Couette-Poiseuille flow.
30, In: Physics of Fluids, (4), S. 041702, ISSN 1070-6631, DOI: 10.1063/1.5028324,
[Online-Edition: https://doi.org/10.1063/1.5028324],
[Artikel]

Gehb, Christopher Maximilian ; Platz, Roland ; Melz, Tobias (2018):
Two control strategies for semi-active load path redistribution in a load-bearing structure.
118, In: Mechanical Systems and Signal Processing, Elsevier, S. 195-208, [Artikel]

Gerber, Siegfried ; Ellermeier, Jörg (2018):
Kalibrierung in der Werkstofftechnik als Mittel zur Qualitätssicherung. – Calibration in the field of materials engineering as instrument of quality assurance.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 1, S. 5 – 11. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Gerlitzky, Christiane ; Volz, Stefan ; Groche, Peter (2018):
Brushing for high performance cold pressure welded bonds.
767, In: Key Engineering Materials, S. 309-315, [Artikel]

Geßner, Felix ; Bölling, Christian (2018):
Qualität im Vergleich.
151, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (6), S. 47-49, ISSN 0043-2792, [Artikel]

Gierth, S. ; Hunger, F. ; Popp, S. ; Wu, H. ; Ihme, M. ; Hasse, C. (2018):
Assessment of differential diffusion effects in flamelet modeling of oxy-fuel flames.
197, In: Combustion and Flame, S. 134 - 144, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2018.07.023,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2018.07.023],
[Artikel]

Glass, Rupert ; Meißner, Alyssa ; Gebauer, Christoph ; Stürmer, Sandra ; Metternich, Joachim (2018):
Identifying the Barriers to Industrie 4.0.
In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 985-988, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.03.187],
[Artikel]

Glass, Rupert ; Miersch, Philipp ; Metternich, Joachim (2018):
Influence of Learning Factories on Students’ Success – a Case Study.
78, In: Procedia CIRP, 6th CIRP Global Web Conference – Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era, Elsevier B.V., S. 155-160, ISSN 2212-8271, DOI: 10.1016/j.procir.2018.08.307,
[Online-Edition: https://doi.org/10.1016/j.procir.2018.08.307],
[Artikel]

Gosheva, Olesya ; Andersohn, Georg ; Oechsner, Matthias (2018):
Comparative study of the testing approaches for the susceptibility of high-strength fasteners to environmental hydrogen embrittlement (EHE).
In: Materials Testing 60 (2018), 3, S. 251 – 256. ISSN 0025-5300, 2195-8572 <reviewed>, [Artikel]

Grebenev, Vladimir N. ; Oberlack, Martin (2018):
Homogeneous Isotropic Turbulence: Geometric and Isometry Properties of the 2-point Velocity Correlation Tensor.
25, In: Journal of Nonlinear Mathematical Physics, (4), S. 650-672, ISSN 1402-9251, DOI: 10.1080/14029251.2018.1503447,
[Online-Edition: https://doi.org/10.1080/14029251.2018.1503447],
[Artikel]

Groche, Peter ; Griesel, Dominic (2018):
Sandwichkragen als Anbindungsstellen.
10, In: wt Werkstattstechnik online, S. 662-667, [Artikel]

Groche, Peter ; Günzel, Janosch ; Suckow, Timon (2018):
Blechkomponenten aus hochfestem Aluminium - Möglichkeiten und Potenzial der Inline-Wärmebehandlung von EN AW-7075 beim Walzprofilieren.
10, In: Werkstattstechnik online: wt, Springer VDI Verlag, Düsseldorf, S. 639-645, [Artikel]

Groche, Peter ; Kleemann, Annemie ; Köhler, Stefan (2018):
Surface pre-treatment and its influence on electric functionality and the formability of screen printed steel sheet.
12, In: Production Engineering, S. 789-795, [Artikel]

Groche, Peter ; Kramer, Philipp ; Bay, Niels ; Christiansen, Peter ; Dubar, Laurent ; Hayakawa, Kunio ; Hu, Chengliang ; Kitamura, Kazuhiko ; Moreau, Philippe (2018):
Friction coefficients in cold forging - a global perspective.
67, In: CIRP, S. 261-264, [Artikel]

Groche, Peter ; Köhler, Stefan (2018):
Blick in die Natur: Natürlicher Leichtbau in der Karosserie.
4, In: Blechnet, [Artikel]

Groche, Peter ; Köhler, Stefan ; Kern, Sarah (2018):
Stamping of stringer sheets.
36, In: Journal of Manufacturing Processes, S. 319-329, [Artikel]

Groche, Peter ; Moneke, Matthias ; Wang, Tianbo ; Storbeck, Martin (2018):
Designfreiheit im Bauwesen durch flexible Profiliertechnik.
In: Festschrift Jörg Lange, S. 105-112, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/id/eprint/7466],
[Artikel]

Groche, Peter ; Sinz, Julian ; Felber, Paul (2018):
Kombinierte Wälz-Gleitlager – Anforderungsgerechter Funktionsübergang.
Sonderheft SH1/2018, In: Konstruktionspraxis: Vogel Verlag, [Artikel]

Groß, T. F. ; Terwort, A. ; Ludwig, G. ; Pelz, P. F. (2018):
The Role of Diffusion-Driven Nucleation in Hydrodynamic Cavitation.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), ASME, DOI: 10.1115/1.861851_ch197,
[Online-Edition: http://ebooks.asmedigitalcollection.asme.org/content.aspx?bo...],
[Artikel]

Götz, Benedict ; Kersting, Sebastian (2018):
Estimation of Uncertainty in the Lateral Vibration Attenuation of a Beam with Piezo-Elastic Supports by Neural Networks.
885, In: Applied Mechanics and Materials, S. 293-303, ISSN 1662-7482, DOI: 10.4028/www.scientific.net/AMM.885.293,
[Artikel]

Götz, Benedict ; Platz, Roland ; Melz, Tobias (2018):
Effect of static axial loads on the lateral vibration attenuation of a beam with piezoelastic supports.
Volume 27, In: Smart Materials and Structures, (Number 3), IOP Publishing Ltd, [Artikel]

Haag, Sebastian ; Anderl, Reiner (2018):
Digital twin – Proof of concept.
In: Manufacturing Letters, Elsevier, ISSN 22138463, DOI: 10.1016/j.mfglet.2018.02.006,
[Online-Edition: https://doi.org/10.1016/j.mfglet.2018.02.006],
[Artikel]

Hartl, Sandra ; Geyer, Dirk ; Dreizler, Andreas ; Magnotti, Gaetano ; Barlow, Robert S. ; Hasse, Christian (2018):
Regime identification from Raman/Rayleigh line measurements in partially premixed flames.
189, In: Combustion and Flame, S. 126 - 141, ISSN 0010-2180, DOI: 10.1016/j.combustflame.2017.10.024,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2017.10.024],
[Artikel]

Hartmann, Lukas ; Meudt, Tobias ; Seifermann, Stefan ; Metternich, Joachim (2018):
Value Stream Method 4.0: Holistic Method to Analyse and Design Value Streams in the Digital Age.
78, In: Procedia CIRP, 6th CIRP Global Web Conference – Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era, Elsevier B.V., S. 249-254, ISSN 2212-8271, DOI: 10.1016/j.procir.2018.08.309,
[Online-Edition: https://doi.org/10.1016/j.procir.2018.08.309],
[Artikel]

Hartmann, Lukas ; Meudt, Tobias ; Seifermann, Stefan ; Metternich, Joachim (2018):
Wertstromdesign 4.0 – Gestaltung schlanker Wertströme im Zeitalter von Digitalisierung und Industrie 4.0.
113, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (6), S. 393-397, ISSN 0947-0085, [Artikel]

Hau, Jan-Niklas ; Müller, Björn (2018):
Acoustic wave propagation in a temporal evolving shear-layer for low-Mach number perturbations.
30, In: Physics of Fluids, (1), S. 016105, ISSN 1070-6631, DOI: 10.1063/1.4999044,
[Online-Edition: https://doi.org/10.1063/1.4999044],
[Artikel]

Hedrich, P. ; Brötz, N. ; Pelz, P. F. (2018):
Resilient Product Development – a New Approach for Controlling Uncertainty.
885, In: Applied Mechanics and Materials, S. 88-101, DOI: 10.4028/www.scientific.net/AMM.885.88,
[Artikel]

Heinrich, A. ; Ganter, S. ; Kuenne, G. ; Jainski, C. ; Dreizler, A. ; Janicka, J. (2018):
3D Numerical Simulation of a Laminar Experimental SWQ Burner with Tabulated Chemistry.
100, In: Flow Turbulence and Combustion, (2), Springer, S. 535-559, ISSN 1386-6184, DOI: 10.1007/s10494-017-9851-9,
[Artikel]

Heinrich, Arne ; Kuenne, Guido ; Ganter, Sebastian ; Hasse, Christian ; Janicka, J. (2018):
Investigation of the Turbulent Near Wall Flame Behavior for a Sidewall Quenching Burner by Means of a Large Eddy Simulation and Tabulated Chemistry.
3, In: Fluids, (3), S. 65, ISSN 2311-5521, DOI: 10.3390/fluids3030065,
[Online-Edition: https://doi.org/10.3390/fluids3030065],
[Artikel]

Helfert, Mark ; Kohne, Thomas ; Petruschke, Lars ; Burkhardt, Max ; Abele, Eberhard (2018):
Energieeffiziente Kühlung durch Einsatz innovativer Aggregate.
151, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (9), S. 218-220, ISSN 0043-2792, [Artikel]

Hell, Matthias ; Wagener, Rainer ; Kaufmann, Heinz ; Melz, Tobias (2018):
Effect of the material modelling and the experimental material characterisation on fatigue life estimation within strain-based fatigue assessment approaches.
Vol. 45, In: Engineering Integrity, S. 8-13, [Artikel]

Heß, Julian ; Wang, Yongqi (2018):
Modeling Debris Flow: On The Influence Of Pore Pressure Evolution And Hypoplasticity.
6, In: International Journal of Computational Methods and Experimental Measurements, (2), WIT Press, S. 385-397, ISSN 2046-0554, DOI: 10.2495/CMEM-V6-N2-385-397,
[Online-Edition: https://www.witpress.com/elibrary/cmem-volumes/6/2/1986],
[Artikel]

Hinton, N. ; Stone, R. ; Cracknell, Roger ; Olm, Carsten (2018):
Aqueous ethanol laminar burning velocity measurements using constant volume bomb methods.
214, In: Fuel, (Supplement C), S. 127 - 134, ISSN 0016-2361, DOI: 10.1016/j.fuel.2017.10.113,
[Online-Edition: https://doi.org/10.1016/j.fuel.2017.10.113],
[Artikel]

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2018):
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
885, In: Applied Mechanics and Materials, S. 35-47, ISSN 1662-7482, DOI: 10.4028/www.scientific.net/AMM.885.35,
[Artikel]

Husmann, Henning ; Köhler, Stefan ; Groche, Peter (2018):
Hybride Leichtbaustrukturen umformtechnisch gefügt.
10, In: Wt Werkstattstechnik online, S. 668-673, [Artikel]

Hänichen, Philipp ; van Eyk, Maximilian ; Stephan, Peter (2018):
Experimental investigations of fuel film evaporation with deposit formation.
70, In: International Journal of Heat and Fluid Flow, S. 125 - 130, ISSN 0142-727X, DOI: 10.1016/j.ijheatfluidflow.2018.02.001,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.02.001],
[Artikel]

Jin, Le ; Scheerer, Herbert ; Andersohn, Georg ; Oechsner, Matthias ; Hellmann, Dieter (2018):
Experimental study on the tribo-chemical smoothening process between self-mated silicon carbide in a water-lubricated surface-contact reciprocating test.
In: Friction 7 (2019), 2, S. 181 – 191 (first online: 5 December 2018, https://doi.org/10.1007/s404544-018- 0219-5). ISSN 2223-7690 <reviewed>, [Artikel]

Jin, Le ; Scheerer, Herbert ; Andersohn, Georg ; Oechsner, Matthias ; Hellmann, Dieter (2018):
Tribo-chemical smoothening process with silica nanoparticles. – Tribochemische Glättung mit Silizium-Nanopartikeln.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 12, S. 1423 – 1338. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Jost, Benjamin ; Klein, Marcus ; Beck, Tilmann ; Eifler, Dietmar (2018):
Out-of-phase TMF lifetime calculation of EN-GJS-600 (ASTM 80-55-06) ductile cast iron based on strain increase tests and evaluation of cyclic deformation behavior in isothermal measuring intervals.
In: International Journal of Fatigue 117 (2018), S. 274 – 282 (available online: 12 August 2018). ISSN 0142-1123, 1879-3452 <reviewed>, [Artikel]

Jost, Benjamin ; Klein, Marcus ; Beck, Tilmann ; Eifler, Dietmar (2018):
Temperature and frequency influence on the cyclic deformation behavior of EN-GJS-600(ASTM 80-55-06) ductile cast iron at 0.005 and 5 Hz.
In: International Journal of Fatigue 110 (2018), S. 225 – 237 (available online: 31 January 2018). ISSN 0142-1123, 1879-3452 <reviewed>, [Artikel]

Karev, Artem ; Harzheim, Lothar ; Immel, Rainer ; Erzgräber, Matthias (2018):
Vergleich verschiedener Formulierungen für eine "Free-Sizing"-Optimierung einer Fronthaube mit der ESL (Equivalent Static Load) Methode.
2333, In: VDI-Berichte, VDI Verlag GmbH, S. 99-127, [Artikel]

Karev, Artem ; Hochlenert, Daniel ; Hagedorn, Peter (2018):
Asynchronous parametric excitation, total instability and its occurrence in engineering structures.
428, In: Journal of Sound and Vibration, S. 1 - 12, ISSN 0022-460X, DOI: 10.1016/j.jsv.2018.05.003,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S0022460X1...],
[Artikel]

Keller, Thimo ; Akin, Mahir ; Metternich, Joachim (2018):
Wertstromorientierte Informationsbedarfsanalyse – Identifikation von Einsatzmöglichkeiten digitaler Assistenz in der Produktion entlang des Wertstroms.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (3), S. 113-117, [Artikel]

Kersten, Antje ; Putz, Hans-Joachim ; Schabel, Samuel (2018):
Mineralöle in Lebensmitteln : Welche Rolle spielen Papier und Karton? Teil 1.
146, In: Wochenblatt für Papierfabrikation, (2), S. 72-79, [Artikel]

Kersten, Antje ; Putz, Hans-Joachim ; Schabel, Samuel (2018):
Mineralöle in Lebensmitteln : Welche Rolle spielen Papier und Karton? Teil 2.
146, In: Wochenblatt für Papierfabrikation, (2), S. 90-97, [Artikel]

Kittel, Hannah M. ; Alam, Ehsanul ; Roisman, Ilia V. ; Tropea, Cameron ; Gambaryan-Roisman, Tatiana (2018):
Splashing of a Newtonian drop impacted onto a solid substrate coated by a thin soft layer.
553, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, S. 89-96, ISSN 0927-7757, DOI: 10.1016/j.colsurfa.2018.04.060,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2018.04.060],
[Artikel]

Kittel, Hannah M. ; Roisman, Ilia V. ; Tropea, Cameron (2018):
Splash of a drop impacting onto a solid substrate wetted by a thin film of another liquid.
3, In: Physical Review Fluids, (7), ISSN 2469-990X, DOI: 10.1103/PhysRevFluids.3.073601,
[Online-Edition: https://doi.org/10.1103/PhysRevFluids.3.073601],
[Artikel]

Klein, Marcus ; Jost, Benjamin ; Smaga, Marek ; Sorich, Andreas ; Eifler, Dietmar ; Beck, Tilmann (2018):
Life assessment in constant and variable amplitude high-temperature fatigue of ductile cast iron and metastable austenitic steel based on in situ measurement of physical properties. – Lebensdauerbestimmung bei Hochtemperaturermüdung von Gusseisen mit Kugelgraphit und metastabilem Stahl mit konstanter und variabler Amplitude mittels in situ Messungen physikalischer Kenngrößen.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 3, S. 332 – 344. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Kohler, Michael ; Krzyzak, Adam ; Mallapur, Shashidhar ; Platz, Roland (2018):
Uncertainty Quantification in Case of Imperfect Models: A Non-Bayesian Approach.
In: Scandinavian Journal of Statistics, Wiley Publishing Ltd., [Artikel]

Kontermann, Christian ; Almstedt, Henning ; Müller, Falk ; Oechsner, Matthias (2018):
On the evaluation and consideration of fracture mechanical notch support within a creep-fatigue lifetime assessment.
In: Transactions of the ASME, Journal of Engineering for Gas Turbines and Power 140 (2018), 12, S. 121014-1 – -9. ISSN 0742-4795, 1528-8919 <reviewed>, [Artikel]

Kosaka, Hidemasa ; Zentgraf, Florian ; Scholtissek, Arne ; Bischoff, Lothar ; Häber, Thomas ; Suntz, Rainer ; Albert, Barbara ; Hasse, Christian ; Dreizler, Andreas (2018):
Wall heat fluxes and CO formation/oxidation during laminar and turbulent side-wall quenching of methane and DME flames.
70, In: International Journal of Heat and Fluid Flow, S. 181-192, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2018.01.009,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.01.009],
[Artikel]

Kraheberger, Stefanie ; Hoyas, Sergio ; Oberlack, Martin (2018):
DNS of a turbulent Couette flow at constant wall transpiration up to Re_τ=1000.
835, In: Journal of Fluid Mechanics, Cambridge University Press, S. 421–443, DOI: 10.1017/jfm.2017.757,
[Artikel]

Kramer, Philipp ; Groche, Peter (2018):
Defect detection in thread rolling processes – Experimental study and numerical investigation of driving parameters.
129, In: International Journal of Machine Tools and Manufacture, S. 27-36, [Artikel]

Kramer, Philipp ; Groche, Peter (2018):
Fehlerdetektion beim Profilwalzen mittels direkter Kraftmessung - Der Einfluss des tribologischen Systems.
33, In: 33. Jahrestreffen der Kaltmassivumformer, S. 37-47, [Artikel]

Kramer, Philipp ; Groche, Peter (2018):
Numerisch unterstützte Auslegung von Profilwalzprozessen.
1, In: massivUMFORMUNG, S. 64-67, [Artikel]

Krech, Martin ; Andreas, Trunk ; Groche, Peter (2018):
Controlling the sensor properties of smart structures produced by metal forming.
262, In: Journal of Materials Processing Technology, S. 541-550, [Artikel]

Krost, P. ; Hübner, W. ; Hasse, C. (2018):
A physical-based approach for modeling cycle-to-cycle variations within a zero-dimensional/one-dimensional simulation environment.
19, In: International Journal of Engine Research, (1), S. 55-66, DOI: 10.1177/1468087417732882,
[Online-Edition: https://doi.org/10.1177/1468087417732882],
[Artikel]

Krumbein, B. ; Termini, V. ; Jakirlić, S. ; Tropea, C. (2018):
Flow and heat transfer in cross-stream type T-junctions: A computational study.
71, In: International Journal of Heat and Fluid Flow, S. 179-188, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2018.03.013,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.03.013],
[Artikel]

Kröling, Henri ; Duchemin, Benoît ; Dormanns, Jan ; Schabel, Samuel ; Staiger, Mark P. (2018):
Mechanical anisotropy of paper-based all-cellulose composites.
113, In: Composites Part A: Applied Science and Manufacturing, S. 150-157, ISSN 1359835X, DOI: 10.1016/j.compositesa.2018.07.005,
[Artikel]

Kuhnhenn, Maximilian ; Joensen, Tórstein V. ; Reck, Mads ; Roisman, Ilia V. ; Tropea, Cameron (2018):
Study of the internal flow in a rotary atomizer and its influence on the properties of the resulting spray.
100, In: International Journal of Multiphase Flow, S. 30-40, ISSN 03019322, DOI: 10.1016/j.ijmultiphaseflow.2017.11.019,
[Online-Edition: https://doi.org/10.1016/j.ijmultiphaseflow.2017.11.019],
[Artikel]

Kuhnhenn, Maximilian ; Luh, Max F. ; Joensen, Tórstein V. ; Reck, Mads ; Roisman, Ilia V. ; Tropea, Cameron (2018):
Modelling of the breakup process of viscous fluids by a high-speed rotary atomizer.
59, In: Experiments in Fluids, (7), ISSN 0723-4864, DOI: 10.1007/s00348-018-2573-5,
[Online-Edition: https://doi.org/10.1007/s00348-018-2573-5],
[Artikel]

Kumar, Abhijeet ; Kleinen, Jochen ; Gambaryan-Roisman, Tatiana ; Venzmer, Joachim (2018):
Electrokinetic investigation of deposition of cationic fabric softener vesicles on anionic porous cotton fabrics.
514, In: Journal of Colloid and Interface Science, S. 132-145, ISSN 0021-9797, DOI: 10.1016/j.jcis.2017.11.062,
[Online-Edition: https://doi.org/10.1016/j.jcis.2017.11.062],
[Artikel]

Köhler, Stefan ; Rohnert, Christoph ; Groche, Peter (2018):
Extension of geometric limits in drawing of stringer sheets.
15, In: Procedia Manufacturing, S. 693-700, [Artikel]

Lamanna, Grazia ; Steinhausen, Christoph ; Weigand, Bernhard ; Preusche, Andreas ; Bork, Benjamin ; Dreizler, Andreas ; Stierle, Rolf ; Groß, Joachim (2018):
On the importance of non-equilibrium models for describing the coupling of heat and mass transfer at high pressure.
98, In: International Communications in Heat and Mass Transfer, S. 49-58, ISSN 07351933, DOI: 10.1016/j.icheatmasstransfer.2018.07.012,
[Online-Edition: https://doi.org/10.1016/j.icheatmasstransfer.2018.07.012],
[Artikel]

Link, Martin ; Haefele, Tobias ; Abele, Eberhard (2018):
Examination of the Connection between Selective Laser-Melted Components Made of 316L Steel Powder on Conventionally Fabricated Base Bodies.
In: Proceedings, 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, Austin, Texas (USA), S. 403-410, [Artikel]

Lv, Cunjing ; Eigenbrod, Michael ; Hardt, Steffen (2018):
Stability and collapse of holes in liquid layers.
855, In: Journal of Fluid Mechanics, Cambridge University Press, S. 1130-1155, ISSN 0022-1120, DOI: 10.1017/jfm.2018.680,
[Online-Edition: https://doi.org/10.1017/jfm.2018.680],
[Artikel]

Lv, Cunjing ; Varanakkottu, Subramanyan Namboodiri ; Baier, Tobias ; Hardt, Steffen (2018):
Controlling the Trajectories of Nano/Micro Particles Using Light-Actuated Marangoni Flow.
18, In: Nano Letters, (11), S. 6924-6930, ISSN 1530-6984, DOI: 10.1021/acs.nanolett.8b02814,
[Online-Edition: https://doi.org/10.1021/acs.nanolett.8b02814],
[Artikel]

Mahajan, Pushkar ; Abrass, Ahmad ; Groche, Peter (2018):
FE Simulation of Roll Forming of a Complex Profile with the Aid of Steady State Properties.
89, In: steel research international, WILEY-VCH Verlag, Weinheim, DOI: 10.1002/srin.201700350,
[Online-Edition: https://onlinelibrary.wiley.com/doi/full/10.1002/srin.201700...],
[Artikel]

Mallapur, Shashidhar ; Platz, Roland (2018):
Quantification of Uncertainty in the Mathematical Modelling of a Multivariable Suspension Strut Using Bayesian Interval Hypothesis-Based Approach.
885, In: Applied Mechanics and Materials, S. 3-17, ISSN 1662-7482, DOI: 10.4028/www.scientific.net/AMM.885.3,
[Artikel]

Mallapur, Shashidhar ; Platz, Roland (2018):
Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference.
118, In: Mechanical Systems and Signal Processing, Elsevier, S. 158-170, [Artikel]

Mann, Arne ; Bürgel, Christoph Maria ; Groche, Peter (2018):
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
7, In: Actuators, (4), S. 81, ISSN 2076-0825, DOI: 10.3390/act7040081,
[Online-Edition: https://www.mdpi.com/2076-0825/7/4/81/pdf],
[Artikel]

Martin, Anne ; König, Markus ; Andersohn, Georg ; Oechsner, Matthias (2018):
Creation and description of sand blasted stamp created micro roughness on polyetheretherketone with subsequent physical vapor deposition coating for promotion of osseointegration. – Erzeugung und Beschreibung von Mikrorauheit auf Polyetheretherketon mit anschließender Beschichtung mittels physikalischer Gasphasenabscheidung zur Förderung der Osseointegration.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 11, S. 1301 – 1313. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Meidinger, Josefine ; Dietrich, Axel ; Dammel, Frank ; Stephan, Peter (2018):
Analysis of a Pumped Heat Electricity Storage System with Latent Heat Thermal Energy Storage.
In: Proceedings of ECOS 2018 - 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 17-21, Guimaraes, Portugal, [Artikel]

Meister, Maximilian ; Böing, Tobias ; Batz, Svenja ; Metternich, Joachim (2018):
Problem-Solving Process Design in Production: Current Progress and Action Required.
78, In: Procedia CIRP, 6th CIRP Global Web Conference – Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era, Elsevier B.V., Elsevier BV, S. 376-381, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.08.316],
[Artikel]

Meißner, Alyssa ; Hertle, Christian ; Metternich, Joachim (2018):
Digitales Shopfloor Management – Ihr Weg zur vernetzten Fabrik.
113, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, S. 281-284, ISSN 0947-0085, [Artikel]

Meißner, Alyssa ; Müller, Marvin ; Hermann, Alexander ; Metternich, Joachim (2018):
Digitalization as a Catalyst for Lean Production: A Learning Factory Approach for Digital Shop Floor Management.
23, In: Procedia Manufacturing, 8th CIRP Conference on Learning Factories, Patras (Greece), Elsevier B.V., S. 81-86, ISSN 2351-9789, [Online-Edition: https://doi.org/10.1016/j.promfg.2018.03.165],
[Artikel]

Meng, Xiannan ; Wang, Yongqi (2018):
Modeling dynamic flows of grain–fluid mixtures by coupling the mixture theory with a dilatancy law.
229, In: Acta Mechanica, S. 2521-2538, ISSN 0001-5970, DOI: 10.1007/s00707-018-2111-9,
[Online-Edition: https://doi.org/10.1007/s00707-018-2111-9],
[Artikel]

Metternich, Joachim ; Schuh, Günther ; Enke, Judith ; Molitor, Marco ; Kreß, Antonio ; Schlosser, Tino ; Gerschner, Katharina ; Goppold, Marvin (2018):
Reifegradbasierte Auditierung von Weiterbildungsmaßnahmen in Lernfabriken.
113, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (10), Carl Hanser Verlag, München, S. 641–646, ISSN 0947-0085, [Artikel]

Moneke, Matthias ; Mahajan, Pushkar ; Groche, Peter (2018):
End flare of linear flow split profiles.
In: International Journal of Material Forming, Springer Verlag, Paris, S. 1-12, DOI: 10.1007/s12289-018-1426-3,
[Artikel]

Nguyen-Hoang, Minh ; Becker, Wilfried (2018):
Efficient 2D stress analysis of an isotropic bolted joint connection with finite dimensions using the Airy stress function.
3, In: International Journal of Theoretical and Applied Mechanics, S. 107-114, ISSN 2367-8992, [Artikel]

Niessen, Benedikt ; Franceschi, Alessandro ; Groche, Peter (2018):
Proofs and Contradictions for Wave Formation Theories in Collision Welding.
767, In: Key Engineering Materials, S. 447-455, [Artikel]

Nishad, Kaushal ; Sadiki, Amsini ; Janicka, J. (2018):
Numerical Investigation of AdBlue Droplet Evaporation and Thermal Decomposition in the Context of NOx-SCR Using a Multi-Component Evaporation Model.
11, In: Energies, (1), S. 222, ISSN 1996-1073, DOI: 10.3390/en11010222,
[Online-Edition: https://doi.org/10.3390/en11010222],
[Artikel]

Ohlemüller, Peter ; Alobaid, Falah ; Abad, Alberto ; Adanez, Juan ; Ströhle, Jochen ; Epple, Bernd (2018):
Development and validation of a 1D process model with autothermal operation of a 1 MW th chemical looping pilot plant.
73, In: International Journal of Greenhouse Gas Control, S. 29-41, ISSN 17505836, DOI: 10.1016/j.ijggc.2018.03.013,
[Online-Edition: https://doi.org/10.1016/j.ijggc.2018.03.013],
[Artikel]

Oltmanns, Johannes ; Freystein, Martin ; Dammel, Frank ; Stephan, Peter (2018):
Improving the operation of a district heating and a district cooling network.
149, In: Energy Procedia, Elsevier, S. 539 - 548, ISSN 1876-6102, DOI: 10.1016/j.egypro.2018.08.218,
[Online-Edition: https://doi.org/10.1016/j.egypro.2018.08.218],
[Artikel]

Ouédraogo, Yun ; Gjonaj, Erion ; Weiland, Thomas ; De Gersem, Herbert ; Steinhausen, Christoph ; Lamanna, Grazia ; Weigand, Bernhard ; Preusche, Andreas ; Dreizler, Andreas (2018):
Modelling and Simulation of Electrically Controlled Droplet Dynamics.
28, In: Scientific Computing in Electrical Engineering (SCEE), S. 101-109, DOI: 10.1007/978-3-319-75538-0_10,
[Online-Edition: https://doi.org/10.1007/978-3-319-75538-0_10],
[Artikel]

Pabst, Christian ; Groche, Peter (2018):
Identification of Process Parameters in Electromagnetic Pulse Welding and Their Utilisation to Expand the Process Window.
6, In: International Journal of Materials, Mechanics and Manufacturing, (1), S. 69-73, [Artikel]

Panten, Niklas ; Strobel, Nina ; Sossenheimer, Johannes ; Abele, Eberhard (2018):
Framework for an Energy Efficient and Flexible Automation Strategy and Control Optimization Approach of Supply Systems within a Thermally-Linked Factory.
72, In: Procedia CIRP, 51st CIRP Conference on Manufacturing Systems, Stockholm (Sweden), Elsevier B.V., S. 526-532, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.03.238],
[Artikel]

Pelz, P. F. ; Taubert, Paul (2018):
Influence of the Tip Clearance on the Auto-Oscillation Frequency of a Cavitating Pump.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), ASME, S. 5, DOI: 10.1115/1.861851_ch105,
[Online-Edition: http://ebooks.asmedigitalcollection.asme.org/content.aspx?bo...],
[Artikel]

Pelz, P. F. ; Taubert, Paul ; Cloos, F.-J. (2018):
Vortex Structure and Kinematics of Encased Axial Turbomachines.
3, In: International Journal of Turbomachinery, Propulsion and Power, (2), ISSN 2504-186X, DOI: 10.3390/ijtpp3020011,
[Online-Edition: https://doi.org/10.3390/ijtpp3020011],
[Artikel]

Praetzas, Christopher ; Mayr, Johannes ; Teppernegg, Tamara ; Nemetz, Andreas ; Haas, Franz (2018):
Höhere Prozesssicherheit durch sensorintegrierte Werkzeuge.
151, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (10), S. 22-26, ISSN 0043-2792, [Artikel]

Praetzas, Christopher ; Teppernegg, Tamara ; Mayr, Johannes ; Czettl, Christoph ; Schäfer, Jonathan ; Abele, Eberhard (2018):
Comparison of Tool Core Temperature and Active Force in Milling of Ti6Al4V under different Cooling Conditions.
18, In: Procedia Manufacturing, 18th Machining Innovations Conference for Aerospace Industry, Garbsen, Elsevier B.V, S. 81-88, ISSN 2351-9789, [Online-Edition: https://doi.org/10.1016/j.promfg.2018.11.011],
[Artikel]

Praetzas, Christopher ; Teppernegg, Tamara ; Mayr, Johannes ; Czettl, Christoph ; Schäfer, Jonathan ; Abele, Eberhard (2018):
Investigation of Tool Core Temperature and Mechanical Tool Load in Milling of Ti6Al4V.
77, In: Procedia CIRP, Conference on High Performance Cutting, Elsevier B.V, S. 118-121, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.08.240],
[Artikel]

Preuß, N. ; Staudter, G. ; Weber, M. ; Anderl, R. ; Pelz, P. F. (2018):
Methods and Technologies for Research- and Metadata Management in Collaborative Experimental Research.
885, In: Applied Mechanics and Materials, S. 170-183, DOI: 10.4028/www.scientific.net/AMM.885.170,
[Artikel]

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018):
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
6, In: Lubricants, (2), S. 13, ISSN 2075-4442, DOI: 10.3390/lubricants6020041,
[Online-Edition: https://doi.org/10.3390/lubricants6020041],
[Artikel]

Reis, Martina Costa ; Alobaid, Falah ; Wang, Yongqi (2018):
Toward the modeling of combustion reactions through discrete element method (DEM) simulations.
In: Computational Particle Mechanics, (5), S. 579-591, ISSN 2196-4378, DOI: 10.1007/s40571-018-0191-x,
[Online-Edition: https://doi.org/10.1007/s40571-018-0191-x],
[Artikel]

Reis, Martina Costa ; Sousa, M. F. B. ; Alobaid, Falah ; Bertran, C. A. ; Wang, Yongqi (2018):
Numerical simulations for homogeneous nucleation of calcium carbonate in concentrated electrolyte solutions.
6, In: International Journal of Computational Methods and Experimental Measurements, (1), S. 35-45, DOI: 10.2495/CMEM-V6-N1-35-45,
[Online-Edition: https://www.witpress.com/elibrary/cmem-volumes/6/1/1956],
[Artikel]

Reisgen, Uwe ; Sharma, Rahul ; Wieland, Stephan ; Gonzalez, Erick ; Oechsner, Matthias ; Andersohn, Georg ; Ellermeier, Jörg ; Siebers, Marius ; Heider, Ben (2018):
Improving the corrosion and wear resistance of grey cast iron components by surface welding with duplex stainless steel using regulated gas metal arc welding: Influence of dilution on corrosion properties. – Erhöhung der Korrosions- und Verschleißbeständigkeit von Bauteilen aus Gusseisen durch Auftragschweißen von Duplexstahl mittels geregeltem Metallschutzgasschweißen: Einfluss der Aufmischung auf die Korrosionseigenschaften.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 12, S. 1520 – 1537. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Reitz, Rüdiger ; Andersohn, Georg ; Oechsner, Matthias (2018):
Bewertung der Werkstoff- und Medienbeständigkeit in Abgaswärmenutzungssystemen.
In: ATZ 120 (2018), 4, S. 72 – 77. ISSN 0001-2785, 2192-8800, [Artikel]

Renaud, A. ; Ding, C.-P. ; Jakirlic, S. ; Dreizler, A. ; Böhm, B. (2018):
Experimental characterization of the velocity boundary layer in a motored IC engine.
71, In: International Journal of Heat and Fluid Flow, S. 366-377, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2018.04.014,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.04.014],
[Artikel]

Reuper, Björn ; Becker, Matthias ; Leinen, Stefan (2018):
Benefits of Multi-Constellation/Multi-Frequency GNSS in a Tightly Coupled GNSS/IMU/Odometry Integration Algorithm.
18, In: Sensors, (9), MDPI, ISSN 1424-8220, DOI: 10.3390/s18093052,
[Online-Edition: https://doi.org/10.3390/s18093052],
[Artikel]

Rieks, Sebastian ; Preußer, Niklas ; Gambaryan-Roisman, Tatiana ; Kenig, Eugeny Y. (2018):
Zero-Gravity Distillation with Metal Foams: A Modelling Approach.
69, In: CHEMICAL ENGINEERING TRANSACTIONS, S. 283 - 288, ISSN 2283-9216, DOI: 10.3303/CET1869048,
[Online-Edition: https://www.aidic.it/cet/18/69/048.pdf],
[Artikel]

Ries, F. ; Nishad, K. ; Dressler, L. ; Janicka, J. ; Sadiki, A. (2018):
Evaluating large eddy simulation results based on error analysis.
32, In: Theoretical and Computational Fluid Dynamics, (6), S. 733-752, ISSN 0935-4964, DOI: 10.1007/s00162-018-0474-0,
[Online-Edition: https://doi.org/10.1007/s00162-018-0474-0],
[Artikel]

Ries, F. ; Yongxiang, L. ; Rissmann, M. ; Klingenberg, D. ; Nishad, K. ; Boehm, B. ; Dreizler, A. ; Janicka, J. ; Sadiki, A. (2018):
Database of Near-Wall Turbulent Flow Properties of a Jet Impinging on a Solid Surface under Different Inclination Angles.
3, In: Fluids, (1), MDPI, S. 5, ISSN 2311-5521, DOI: 10.3390/fluids3010005,
[Artikel]

Ries, Florian ; Li, Yongxiang ; Klingenberg, Dario ; Nishad, Kaushal ; Janicka, J. ; Sadiki, Amsini (2018):
Near-Wall Thermal Processes in an Inclined Impinging Jet: Analysis of Heat Transport and Entropy Generation Mechanisms.
11, In: Energies, (6), S. 1354, ISSN 1996-1073, DOI: 10.3390/en11061354,
[Online-Edition: https://doi.org/10.3390/en11061354],
[Artikel]

Roisman, I. V. ; Breitenbach, J. ; Tropea, C. (2018):
Thermal atomisation of a liquid drop after impact onto a hot substrate.
842, In: Journal of Fluid Mechanics, S. 87-101, ISSN 0022-1120, DOI: 10.1017/jfm.2018.123,
[Online-Edition: https://doi.org/10.1017/jfm.2018.123],
[Artikel]

Rolfe, A. ; Huang, Y. ; Haaf, M. ; Pita, A. ; Rezvani, S. ; Dave, A. ; Hewitt, N.J. (2018):
Technical and environmental study of calcium carbonate looping versus oxy-fuel options for low CO2 emission cement plants.
75, In: International Journal of Greenhouse Gas Control, S. 85-97, ISSN 17505836, DOI: 10.1016/j.ijggc.2018.05.020,
[Online-Edition: https://doi.org/10.1016/j.ijggc.2018.05.020],
[Artikel]

Sacomano Filho, Fernando Luiz ; Speelman, Nico ; van Oijen, Jeroen Adrianus ; de Goey, Laurentius Philippus Hendrika ; Sadiki, Amsini ; Janicka, J. (2018):
Numerical analyses of laminar flames propagating in droplet mists using detailed and tabulated chemistry.
22, In: Combustion Theory and Modelling, (5), S. 998-1032, ISSN 1364-7830, DOI: 10.1080/13647830.2018.1470332,
[Online-Edition: https://doi.org/10.1080/13647830.2018.1470332],
[Artikel]

Sadeghi, H. ; Oberlack, Martin ; Gauding, M. (2018):
On new scaling laws in a temporally evolving turbulent plane jet using Lie symmetry analysis and direct numerical simulation.
854, In: Journal of Fluid Mechanics, S. 233-260, ISSN 0022-1120, DOI: 10.1017/jfm.2018.625,
[Online-Edition: https://doi.org/10.1017/jfm.2018.625],
[Artikel]

Salenbauch, S. ; Sirignano, M. ; Pollack, M. ; D’Anna, A. ; Hasse, C. (2018):
Detailed modeling of soot particle formation and comparison to optical diagnostics and size distribution measurements in premixed flames using a method of moments.
222, In: Fuel, S. 287 - 293, ISSN 0016-2361, DOI: 10.1016/j.fuel.2018.02.148,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0016236118...],
[Artikel]

Sauer, Hans Martin ; Roisman, Ilia V. ; Dörsam, Edgar ; Tropea, Cameron (2018):
Fast liquid sheet and filament dynamics in the fluid splitting process.
557, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Elsevier, S. 20-27, ISSN 09277757, DOI: 10.1016/j.colsurfa.2018.05.101,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2018.05.101],
[Artikel]

Schaeffner, Maximilian ; Platz, Roland (2018):
Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads.
Volume 27, In: Smart Materials and Structures, (Number 6), DOI: 10.1088/1361-665X/aab63a,
[Artikel]

Schaffrath, Heinz-Joachim ; Reichenbach, Felix ; Schabel, Samuel (2018):
Prediction of box failure from paper data asymmetric corrugated board.
17, In: Tappi Journal, (8), S. 429-434, [Artikel]

Schlemmer, Pia Dorothea ; Kloberdanz, Hermann ; Gehb, Christopher Maximilian ; Kirchner, Eckhard (2018):
Adaptivity as a Property to Achieve Resilience of Load-Carrying Systems.
885, In: Applied Mechanics and Materials, S. 77-87, ISSN 1662-7482, DOI: 10.4028/www.scientific.net/AMM.885.77,
[Artikel]

Schmidt, Anna ; Kühnreich, Benjamin ; Kittel, Hannah ; Tropea, Cameron ; Roisman, Ilia V. ; Dreizler, Andreas ; Wagner, Steven (2018):
Laser based measurement of water film thickness for the application in exhaust after-treatment processes.
71, In: International Journal of Heat and Fluid Flow, S. 288-294, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2018.04.013,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2018.04.013],
[Artikel]

Schmidt, Wilhelm ; Groche, Peter (2018):
Wear Prediction for Oscillating Gear Forming Processes Using Numerical Methods.
767, In: Key Engineering Materials, S. 283-289, [Artikel]

Schneider, Patrick ; Kienzler, Reinhold (2018):
Modeling of anisotropic boundary layer effects in plate theory.
18, In: PAMM, (1), S. e201800397, ISSN 16177061, DOI: 10.1002/pamm.201800397,
[Artikel]

Schremb, Markus ; Roisman, Ilia V. ; Tropea, Cameron (2018):
Normal impact of supercooled water drops onto a smooth ice surface: experiments and modelling.
835, In: Journal of Fluid Mechanics, S. 1087-1107, ISSN 0022-1120, DOI: 10.1017/jfm.2017.797,
[Online-Edition: https://doi.org/10.1017/jfm.2017.797],
[Artikel]

Schützer, Klaus ; Abele, Eberhard ; Meinhard, Adrian ; Donnelly, Julia (2018):
Deburring of Complex-Shaped Drilling Intersections: A Numerical Method for Modelling the Tool Path.
100, In: The International Journal of Advanced Manufacturing Technology, Springer London, S. 1-13, ISSN 0268-3768, [Online-Edition: https://doi.org/10.1007/s00170-018-3205-1],
[Artikel]

Seel, Matthias ; Akerboom, Robert ; Knaack, Ulrich ; Oechsner, Matthias ; Hof, Peter ; Schneider, Jens (2018):
Fused glass deposition modelling for applications in the built environment. – Schmelzschichten aus Glas für Anwendungen im Bauwesen.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 7, S. 870 – 880. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Seifermann, Stefan ; Jörg, Böllhoff ; Schaede, Carsten ; Kutzen, Michael ; Metternich, Joachim (2018):
Novel Method to Systematically Implement Lean Production in Machining Areas.
78, In: Procedia CIRP, 6th CIRP Global Web Conference – Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era, Elsevier B.V., S. 61-66, ISSN 2212-8271, DOI: 10.1016/j.procir.2018.09.059,
[Online-Edition: https://doi.org/10.1016/j.procir.2018.09.059],
[Artikel]

Shamooni, Ali ; Cuoci, Alberto ; Faravelli, Tiziano ; Sadiki, Amsini (2018):
Prediction of Combustion and Heat Release Rates in Non-Premixed Syngas Jet Flames Using Finite-Rate Scale Similarity Based Combustion Models.
11, In: Energies, (9), S. 2464, ISSN 1996-1073, DOI: 10.3390/en11092464,
[Online-Edition: https://doi.org/10.3390/en11092464],
[Artikel]

Shojaeian, Mostafa ; Hardt, Steffen (2018):
Fast electric control of the droplet size in a microfluidic T-junction droplet generator.
112, In: Applied Physics Letters, (19), S. 194102, ISSN 0003-6951, DOI: 10.1063/1.5025874,
[Online-Edition: https://doi.org/10.1063/1.5025874],
[Artikel]

Sielaff, Axel ; Gowik, M. ; Völzel, C. ; Rosengarten, G. ; Rajic, N. ; Stephan, Peter (2018):
Temperature measurement using infrared thermometry within semi-transparent media.
In: Experimental Heat Transfer, Taylor & Francis, S. 1-21, DOI: 10.1080/08916152.2018.1549622,
[Online-Edition: https://doi.org/10.1080/08916152.2018.1549622],
[Artikel]

Simon, Bernhard ; Markus, Daniel ; Tropea, Cameron ; Grundmann, Sven (2018):
Cancellation of Tollmien–Schlichting Waves in Direct Vicinity of a Plasma Actuator.
56, In: AIAA Journal, (5), S. 1760-1769, ISSN 0001-1452, DOI: 10.2514/1.j056265,
[Online-Edition: https://doi.org/10.2514/1.j056265],
[Artikel]

Simonsen, Fabian ; Weber, Jens ; Rennert, Roland ; Oechsner, Matthias (2018):
Der Einfluss zinkbasierter Korrosionsschutzsysteme auf die Dauerfestigkeit. – The influence of zinc-based corrosion protection systems on the fatigue limit.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 6, S. 703 – 713. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Stanula, Patrick ; Metternich, Joachim ; Keller, Thimo ; Glockseisen, Thomas (2018):
Strategischer Ansatz zur Umsetzung der Losgröße 1. Stufenweises Vorgehen zur Implementierung dezentraler Steuerungssysteme in Kombination mit additiven Fertigungsverfahren.
34, In: Industrie 4.0 Management, GITO Verlag, Berlin, (1), S. 31-35, ISSN 1434-1980, [Artikel]

Stanula, Patrick ; Ziegenbein, Amina ; Metternich, Joachim (2018):
Machine Learning Algorithms in Production: A Guideline for Efficient Data Source Selection.
78, In: Procedia CIRP, 6th CIRP Global Web Conference – Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era, Elsevier B.V., S. 261-266, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2018.08.177],
[Artikel]

Stein, Nicolas ; Becker, Wilfried (2018):
Assessment of structural adhesive bondings of arbitrary lap joint design using finite fracture mechanics.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-35., [Artikel]

Stein, Nicolas ; Rosendahl, Philipp Laurens ; Becker, Wilfried (2018):
Modelling load transfer and mixedmode fracture of ductile adhesive composite joints.
82, In: International Journal of Adhesion and Adhesives, S. 299-310, ISSN 0143-7496, DOI: 10.1016/j.ijadhadh.2018.01.013,
[Artikel]

Straub, Carmen ; Kronenburg, Andreas ; Stein, Oliver T. ; Kuenne, Guido ; Janicka, J. ; Barlow, Robert S. ; Geyer, Dirk (2018):
Multiple mapping conditioning coupled with an artificially thickened flame model for turbulent premixed combustion.
196, In: Combustion and Flame, S. 325-336, ISSN 00102180, DOI: 10.1016/j.combustflame.2018.05.021,
[Online-Edition: https://doi.org/10.1016/j.combustflame.2018.05.021],
[Artikel]

Strobel, Nina ; Abele, Eberhard (2018):
Decentral Control Strategies for Demand-Side Management by Industrial Heating and Cooling Devices with Discontinuous Operation Mode.
69, In: Procedia CIRP, 25th CIRP Life Cycle Engineering Conference, Copenhagen (Denmark), Elsevier B.V., S. 360-365, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2017.11.059],
[Artikel]

Stroh, Alexander ; Daikeler, Alexander ; Nikku, Markku ; May, Jan ; Alobaid, Falah ; von Bohnstein, Maximilian ; Ströhle, Jochen ; Epple, Bernd (2018):
Coarse grain 3D CFD-DEM simulation and validation with capacitance probe measurements in a circulating fluidized bed.
196, In: Chemical Engineering Science, S. 37-53, ISSN 00092509, DOI: 10.1016/j.ces.2018.11.052,
[Online-Edition: https://doi.org/10.1016/j.ces.2018.11.052],
[Artikel]

Stuhlenmiller, Florian ; Schuy, Jochen ; Beckerle, Philipp (2018):
Probabilistic Elastic Element Design for Robust Natural Dynamics of Variable Stiffness Actuators.
10(1), In: ASME Journal of Mechanisms and Robotics, S. 011009-011009-9, [Artikel]

Taubert, Paul ; Pelz, P. F. ; Buttenbender, J. (2018):
On the Dynamics of a Torus Cloud Employing the Van Wijngaarden Ansatz and the Gilmore Bubble Dynamics Equation.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), ASME, DOI: 10.1115/1.861851_ch163,
[Online-Edition: http://ebooks.asmedigitalcollection.asme.org/content.aspx?bo...],
[Artikel]

Thammanna Gurumurthy, Vignesh ; Rettenmaier, Daniel ; Roisman, Ilia V. ; Tropea, Cameron ; Garoff, Stephen (2018):
Computations of spontaneous rise of a rivulet in a corner of a vertical square capillary.
544, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, S. 118-126, ISSN 09277757, DOI: 10.1016/j.colsurfa.2018.02.003,
[Online-Edition: https://doi.org/10.1016/j.colsurfa.2018.02.003],
[Artikel]

Thammanna Gurumurthy, Vignesh ; Roisman, Ilia V. ; Tropea, Cameron ; Garoff, Stephen (2018):
Spontaneous rise in open rectangular channels under gravity.
527, In: Journal of Colloid and Interface Science, S. 151-158, ISSN 00219797, DOI: 10.1016/j.jcis.2018.05.042,
[Online-Edition: https://doi.org/10.1016/j.jcis.2018.05.042],
[Artikel]

Traub, Tilman ; Gregório, Mateus Garcia ; Groche, Peter (2018):
A framework illustrating decision making in operator assistance systems and its application to a roll forming process.
97 (9-12), In: The International Journal of Advanced Manufacturing Technology, S. 3701-3710, [Artikel]

Traub, Tilman ; Hohmann, Johannes ; Übelacker, David ; Groche, Peter (2018):
Höhere Robustheit von Umformprozessen durch Digitalisierung.
In: MAV-event: 2. MAV Themenpark Industrie 4.0, S. 6-7, [Artikel]

Vega, Juan ; Scheerer, Herbert ; Andersohn, Georg ; Oechsner, Matthias (2018):
Evaluation of the open porosity of PVD coatings through electrochemical iron detection.
In: Surface and Coatings Technology 350 (2018), S. 453 – 461 (available online: 09 July 2018. ISSN 0257-8972 <reviewed>, [Artikel]

Vega, Juan ; Scheerer, Herbert ; Andersohn, Georg ; Oechsner, Matthias (2018):
Experimental studies of the effect of Ti interlayers on the corrosion resistance of TiN PVD coatings by using electrochemical methods.
In: Corrosion Science 133 (2018), S. 240 – 250 (available online: 31 January 2018). ISSN 0010-938X <reviewed>, [Artikel]

Verschaeve, Joris C. G. ; Pedersen, Geir K. ; Tropea, Cameron (2018):
Non-modal stability analysis of the boundary layer under solitary waves.
836, In: Journal of Fluid Mechanics, S. 740-772, ISSN 0022-1120, DOI: 10.1017/jfm.2017.825,
[Online-Edition: https://doi.org/10.1017/jfm.2017.825],
[Artikel]

Volz, Marcel ; Abele, Eberhard (2018):
Spanungsquerschnittmodell für Bohrprozesse.
108, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 45-50, ISSN 1436-4980, [Artikel]

Vécsei, Miklós ; Dietzel, Mathias ; Hardt, Steffen (2018):
Interfacial instability of liquid films coating the walls of a parallel-plate channel and sheared by a gas flow.
22, In: Microfluidics and Nanofluidics, (9), ISSN 1613-4982, DOI: 10.1007/s10404-018-2111-z,
[Online-Edition: https://doi.org/10.1007/s10404-018-2111-z],
[Artikel]

Waclawczyk, T. ; Schäfer, M. (2018):
Verification of a binary fluid solidification model using semi-analytical solution of 1D heat diffusion equation.
39, In: Chemical and Process Engineering-Inzynieria Chemiczna I Procesowa, (1), S. 85-102, ISSN 0208-6425, DOI: 10.24425/119101,
[Online-Edition: https://doi.org/10.24425/119101],
[Artikel]

Wakula, Jurij ; Bauer, Stefan ; Spindler, Sören ; Bruder, Ralph (2018):
Analyse von Belastungen und muskulären Beanspruchungen der unteren Extremitäten beim „seitlichen“ und „gemischtem“ Gehen an einer simulierten U-Montagelinie mit unterschiedlichen Laufrichtungen und kurzen Taktzeiten.
In: Zeitschrift für Arbeitswissenschaft, Springer, S. 71-81, DOI: 10.1007/s41449-017-0074-7,
[Artikel]

Weber, Moritz ; Staudter, Georg ; Anderl, Reiner (2018):
Comparison of Inductive Inference Mechanisms and their Suitability for an Information Model for the Visualization of Uncertainty.
885, In: Applied Mechanics and Materials, Trans Tech Publications, S. 147-155, ISSN 1660-9336, DOI: 10.4028/www.scientific.net/AMM.885.147,
[Artikel]

Weißgraeber, Philipp ; Rosendahl, Philipp Laurens (2018):
Schneebrettlawinen. Bruchmechanik der Schwachschicht.
27, In: bergundsteigen, (4 (#105)), S. 70-77, [Artikel]

Wester, T.T.B. ; Kampers, G. ; Gülker, G. ; Peinke, J. ; Cordes, U. ; Tropea, C. ; Hölling, M. (2018):
High speed PIV measurements of an adaptive camber airfoil under highly gusty inflow conditions.
1037, In: Journal of Physics: Conference Series, S. 072007, ISSN 1742-6588, DOI: 10.1088/1742-6596/1037/7/072007,
[Online-Edition: https://doi.org/10.1088/1742-6596/1037/7/072007],
[Artikel]

Yu, Haitao ; Sun, Hui ; Shen, Jianqi ; Tropea, Cameron (2018):
Measurements of refractive index and size of a spherical drop from Gaussian beam scattering in the primary rainbow region.
207, In: Journal of Quantitative Spectroscopy and Radiative Transfer, S. 83-88, ISSN 00224073, DOI: 10.1016/j.jqsrt.2017.12.028,
[Online-Edition: https://doi.org/10.1016/j.jqsrt.2017.12.028],
[Artikel]

Anderl, Reiner ; Haag, Sebastian ; Schützer, Klaus ; Zancul, Eduardo (2017):
Digital Twin Technology – An Approach for Industrie 4.0 Vertical and Horizontal Lifecycle Integration.
In: it - Information Technology, (60), De Gruyter Oldenbourg, S. 125-132, DOI: 10.1515/itit-2017-0038,
[Online-Edition: https://www.degruyter.com/view/j/itit.2018.60.issue-3/itit-2...],
[Artikel]

Cloos, F.-J. ; Pelz, P. F. (2017):
Swirl Boundary Layer at the Inlet of a Rotating Circular Cone.
In: Proceedings of 17th ISROMAC, 2017, [Online-Edition: http://isromac-isimet.univ-lille1.fr/upload_dir/finalpaper17...],
[Artikel]

Pelz, P. F. ; Taubert, Paul ; Cloos, F.-J. (2017):
Vortex structure and kinematics of encased axial turbomachines.
In: Proceedings of 17th ISROMAC, 2017, [Online-Edition: http://isromac-isimet.univ-lille1.fr/upload_dir/finalpaper17...],
[Artikel]

Bandopadhyay, A. ; Hardt, Steffen (2017):
Stability of horizontal viscous fluid layers in a vertical arbitrary time periodic electric field.
29, In: Physics of Fluids, (124101), [Online-Edition: http://dx.doi.org/10.1063/1.4999429],
[Artikel]

Leise, Philipp ; Altherr, Lena C. ; Pelz, P. F. (2017):
Energy-Efficient Design of a Water Supply System for Skyscrapers by Mixed-Integer Nonlinear Programming.
In: Operations Research Proceedings 2017: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, [Artikel]

Gottschling, Anke ; Krebs, Tobias ; Schabel, Samuel (2017):
Sampling of paper and board for recycling : model helps to determine suitable sample sizes.
12, In: Professional Papermaking, (2), S. 42-47, [Artikel]

Groß, T. F. ; Bauer, J. ; Ludwig, G. ; Fernandez Rivas, D. ; Pelz, P. F. (2017):
Bubble nucleation from micro-crevices in a shear flow.
59, In: Experiments in Fluids, Springer, S. 1-10, ISSN 0723-4864, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/article_2017_B...],
[Artikel]

Yildar, E. ; Kuenne, G. ; He, C. ; Schiessl, R. ; Benzinger, M. S. ; Neurohr, M. ; di Mare, F. ; Sadiki, A. ; Janicka, J. (2017):
Understanding the Influences of Thermal and Mixture Inhomogeneities on the Auto-Ignition Process in a Controlled Auto-Ignition (CAI) Engine Using LES.
72, In: Oil & Gas Science and Technology, (6), Revue d’IFP Energies nouvelles, [Artikel]

Bauer, Benedikt ; Heimrich, Felix ; Kohler, Michael ; Krzyzak, Adam (2017):
On estimation of surrogate models for multivariate computer experiments.
69, In: Annals of the Institute of Statistical Mathematics, Springer, ISSN 1572-9052, [Online-Edition: Http://10.1007/s10463-017-0627-8],
[Artikel]

Schnabel, J. ; Yousfi, M. ; Mittelstedt, C. (2017):
Free-edge effects in curved composite laminated structures with arbitrary unsymmetric layups under bending load.
In: Composite Structures, (180), Elsevier, S. 862-875, ISSN 0263-8223, DOI: 10.1016/j.compstruct.2017.08.002,
[Artikel]

Zöller, Ilka ; Abendroth, Bettina ; Bruder, Ralph (2017):
Driver behaviour validity in driving simulators – Analysis of the moment of initiation of braking at urban intersections.
In: Transportation Research Part F, [Online-Edition: https://doi.org/10.1016/j.trf.2017.09.008],
[Artikel]

Nienhaus, Vinzenz ; Spiehl, Dieter ; Dörsam, Edgar (2017):
Influence of slicer software on transformation of virtual data into porous microstructures.
1, In: Journal of 3D Printing in Medicine, (4), Future Medicine Ltd,, DOI: 10.2217/3dp-2017-0015,
[Artikel]

Meyer, Tobias ; Kraft, Jan ; Li, Pu ; Lu, Daixing ; Schweizer, Bernhard (2017):
Error estimation approach for controlling the macro step-size for explicit co-simulation methods.
In: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany, S. 348-351, [Online-Edition: http://dx.doi.org/10.18419/opus-9334],
[Artikel]

Oberle, Marius ; Helfert, Marlene ; König, Christina ; Bruder, Ralph (2017):
Experimentelle Untersuchung des menschlichen Einflusses auf die Unsicherheit in der Mensch-Technik-Interaktion.
In: Zeitschrift für Arbeitswissenschaft, S. 1-12, [Online-Edition: https://link.springer.com/content/pdf/10.1007/s41449-017-007...],
[Artikel]

Rönick, Katharina ; Bier, Lukas ; Bopp, Verena ; Bruder, Ralph (2017):
Handwerk demografiegerecht gestalten – Belastungsbewertung und Arbeitsgestaltung im Baugewerbe am Beispiel der Dachdecker und Zimmerer.
In: Zeitschrift für Arbeitswissenschaft, Springer, [Online-Edition: https://doi.org/10.1007/s41449-017-0073-8],
[Artikel]

Hedrich, P. ; Pelz, P. F. ; Lenz, Eric (2017):
Modellbildung, Regelung und experimentelle Untersuchung einer aktiven Luftfederung in einer Hardware-in-the-Loop-Simulationsumgebung.
In: VDI-Berichte 2295, S. 447-460, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_171010_M...],
[Artikel]

Damian, I.R. ; Hardt, Steffen ; Balan, C. (2017):
From flow focusing to vortex formation in crossing microchannels.
21, In: Microfluidics and Nanofluidics, (142), [Online-Edition: http://dx.doi.org/10.1007/s10404‐017‐1975-7],
[Artikel]

Roy, T. ; Szuttor, K. ; Smiatek, J. ; Holm, C. ; Hardt, Steffen (2017):
Electric‐field‐induced stretching of surface‐tethered polyelectrolytes in a microchannel.
E96, 032503, In: Physical Review, [Online-Edition: http://dx.doi.org/10.1103/PhysRevE.96.032503],
[Artikel]

Roy, T. ; Szuttor, K. ; Smiatek, J. ; Holm, C. ; Hardt, Steffen (2017):
Stretching of surface‐tethered polymers in pressure‐driven flow under confinement.
13, In: Soft Matter, S. 6189-6196, [Online-Edition: http://dx.doi.org/10.1039/c7sm00306d],
[Artikel]

Stockinger, Christopher ; Verma, Rohan ; König, Christina (2017):
Konzipierung einer Cockpit-Applikation für smarte Fabriken zum Abbau von Komplexität.
In: Zeitschrift für Arbeitswissenschaft, Springer, S. 1-9, [Online-Edition: https://link.springer.com/article/10.1007/s41449-017-0077-4],
[Artikel]

Takizawa, Hiroyuki ; Reimann, Thorsten ; Komatsu, Kazuhiro ; Soga, Takashi ; Egawa, Ryusuke ; Musa, Akihiro ; Kobayashi, Hiroaki (2017):
Vectorization-Aware Loop Optimization with User-Defined Code Transformations.
In: 2017 IEEE International Conference on Cluster Computing (CLUSTER), IEEE, S. 685-692, ISSN 2168-9253, DOI: 10.1109/CLUSTER.2017.102,
[Online-Edition: http://ieeexplore.ieee.org/abstract/document/8049004/],
[Artikel]

Shen, Ye ; Rinderknecht, Stephan ; Hoppert, M. (2017):
General modelling method of power losses in transmission with parameter identification.
In: Forschung im Ingenieurwesen, (81(2-3), S. 117-123, ISSN 1434-0860, [Artikel]

Shen, Ye ; Rinderknecht, Stephan ; Hoppert, M. (2017):
General modelling method of power losses in transmission with parameter identification.
In: VDI-Berichte 2294, (2294), S. 905-916, [Artikel]

Holl, M. ; Rausch, L. ; Pelz, P. F. (2017):
New methods for new systems–How to find the techno-economically optimal hydrogen conversion system.
42, In: International Journal of Hydrogen Energy, (36), Elsevier Science Publishing, S. 22641-22654, ISSN 0360-3199, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S0360319917...],
[Artikel]

Quurck, Lukas ; Franz, Daniel ; Schüßler, Benedikt ; Rinderknecht, Stephan (2017):
Planetary backup bearings for high speed applications and service life estimation methodology.
4, In: Mechanical Engineering Journal, (5), [Online-Edition: https://www.jstage.jst.go.jp/browse/mej/advpub/0/_contents],
[Artikel]

Ambur Sankaranarayanan, Ramakrishnan ; Rinderknecht, Stephan (2017):
Unbalance detection in rotor systems with active bearings using self-sensing piezoelectric actuators.
In: Mechanical Systems and Signal Processing, (102), Elsevier, S. 72-86, DOI: 10.1016/j.ymssp.2017.09.006,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0888327017...],
[Artikel]

Felber, Paul ; Groche, Peter ; Hohmann, Johannes ; Traub, Tilman (2017):
Der Weg in die Digitalisierung – Kompetenzzentrum als Unterstützung.
4-2017, In: Blechnet, S. 78-79, [Artikel]

Heinze, Christian ; Higman, Chris ; Marasigan, Jose ; Epple, Bernd (2017):
Investigation of new control strategies for acid gas absorber columns to improve the response rates using dynamic process simulation.
203, In: Fuel, S. 964-972, ISSN 00162361, DOI: 10.1016/j.fuel.2017.03.086,
[Online-Edition: https://doi.org/10.1016/j.fuel.2017.03.086],
[Artikel]

Rausch, L. ; Friesen, John ; Altherr, Lena C. ; Pelz, P. F. (2017):
Using Mixed-Integer Programming for the Optimal Design of Water Supply Networks for Slums.
In: In: Operations Research Proceedings 2017: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), [Online-Edition: https://www.springer.com/us/book/9783319899190],
[Artikel]

Bender, Achim ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2017):
Thin liquid films with time-dependent chemical reactions sheared by an ambient gas flow.
2, In: Physical Review Fluids, (8), S. 084002-1, ISSN 2469-990X, [Online-Edition: https://doi.org/10.1103/PhysRevFluids.2.084002],
[Artikel]

Werschnik, Holger ; Schneider, Marius ; Herrmann, Janina ; Ivanov, Dimitri ; Schiffer, Heinz-Peter ; Lyko, Christoph (2017):
The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR): Experimental and Numerical Investigation.
2, In: International Journal of Turbomachinery Propulsion and Power, (12), DOI: 10.3390/ijtpp2030012,
[Online-Edition: http://www.mdpi.com/2504-186X/2/3/12],
[Artikel]

Werschnik, Holger ; Hilgert, Jonathan ; Wilhelm, Manuel ; Bruschewski, Martin ; Schiffer, Heinz-Peter (2017):
Influence of Combustor Swirl on Endwall Heat Transfer and Film Cooling Effectiveness at the Large Scale Turbine Rig.
139, In: ASME Journal of Turbomachinery, (8), S. 081007-081007-12, [Online-Edition: http://turbomachinery.asmedigitalcollection.asme.org/article...],
[Artikel]

Beckerle, Philipp ; Perner, Gernot ; Stuhlenmiller, Florian ; Rinderknecht, Stephan (2017):
Technical faults in elastically-actuated robots - Expert opinions and methodological analyses.
59, In: atp edition - Automatisierungstechnische Praxis, (6), Oldenbourg Industrieverlag GmbH, S. 36-45, [Artikel]

Beetz, Jean-Paul (2017):
Neue Dosiermaschine für die Produktion gefüllter Schokoladenprodukte.
In: Ingenieurspiegel | Maschinenbau, (3), Public Verlagsgesellschaft, Bingen, S. 6-8, [Artikel]

Tantik, Erdal ; Anderl, Reiner (2017):
Integrated Data Model and Structure for the Asset Administration Shell in Industrie 4.0.
60, In: Procedia CIRP : Complex Systems Engineering and Development Proceedings of the 27th CIRP Design Conference Cranfield University, Elsevier, S. 86-91, ISSN 2212-8271, DOI: 10.1016/j.procir.2017.01.048,
[Artikel]

Zech, Philipp ; Rinderknecht, Stephan ; Lato, V. (2017):
Direct adaptive feedforward compensation of narrowband disturbances without explicit identification of the secondary path model.
In: Journal of Sound and Vibration, (401), S. 282-296, ISSN 0022-460X, [Online-Edition: https://doi.org/10.1016/j.jsv.2017.05.002],
[Artikel]

Sadiki, A. ; Agrebi, S. ; Chrigui, M. ; Doost, A. S. ; Knappstein, R. ; di Mare, F. ; Janicka, J. ; Massmeyer, A. ; Zabrodiec, D. ; Hees, J. ; Kneer, R. (2017):
Analyzing the effects of turbulence and multiphase treatments on oxy-coal combustion process predictions using LES and RANS.
166, In: Chemical Engineering Science, Pergamon-Elsevier Science Ltd, S. 283-302, ISSN 0009-2509, DOI: 10.1016/j.ces.2017.03.015,
[Artikel]

Szuttor, K. ; Roy, T. ; Hardt, Steffen ; Holm, C. ; Smiatek, J. (2017):
The stretching force on a tethered polymer in pressure‐driven flow.
147, In: Journal of Chemical Physics, (034902), [Online-Edition: http://dx.doi.org/10.1063/1.4993619],
[Artikel]

Herrmann, J. ; Kühn, T. ; Müllenstedt, T. ; Mittelstedt, S. ; Mittelstedt, C. (2017):
Local buckling of laminated composite beams based on different plate theories.
17, In: PAMM — Proceedings in Applied Mathematics and Mechanics, (1), Wiley, S. 333-334, ISSN 1617-7061, DOI: 10.1002/pamm.201710136,
[Artikel]

Grasreiner, S. ; Neumann, J. ; Wensing, M. ; Hasse, C. (2017):
Model-based virtual engine calibration with the help of phenomenological methods for spark-ignited engines.
121, In: Applied Thermal Engineering, Elsevier, S. 190-199, ISSN 1359-4311, DOI: 10.1016/j.applthermaleng.2017.04.046,
[Online-Edition: https://doi.org/10.1016/j.applthermaleng.2017.04.046],
[Artikel]

Haaf, Martin ; Stroh, Alexander ; Hilz, Jochen ; Helbig, Martin ; Ströhle, Jochen ; Epple, Bernd (2017):
Process Modelling of the Calcium Looping Process and Validation Against 1 MWth Pilot Testing.
114, In: Energy Procedia, S. 167-178, ISSN 18766102, DOI: 10.1016/j.egypro.2017.03.1159,
[Online-Edition: https://doi.org/10.1016/j.egypro.2017.03.1159],
[Artikel]

Utz, Thomas ; Kummer, Florian ; Oberlack, Martin (2017):
Interface-preserving level-set reinitialization for DG-FEM.
84, In: International Journal for Numerical Methods in Fluids, (4), S. 183-198, ISSN 02712091, [Online-Edition: http://dx.doi.org/10.1002/fld.4344],
[Artikel]

Friesen, John ; Rausch, L. ; Pelz, P. F. (2017):
Providing water for the poor - towards optimal water supply infrastructures for informal settlements by using remote sensing data.
In: Joint Urban Remote Sensing Event (JURSE), 2017, Dubai, VAE., [Online-Edition: http://ieeexplore.ieee.org/document/7924541/],
[Artikel]

Anderl, Reiner ; Anokhin, Oleg ; Galaske, Nadia ; Kugler, Stefan ; Wang, Gong (2017):
Entwicklung individueller Geschäftsmodelle im Zeitalter der Digitalisierung.
In: Wissenschaft trifft Praxis, (8), Mittelstand-Digital, S. 91-98, ISSN 2198-8544, [Online-Edition: http://www.mittelstand-digital.de/MD/Redaktion/DE/PDF/wissen...],
[Artikel]

Fenner, Andreas ; Stephan, Peter (2017):
Two dye combinations suitable for two‐color/two‐dye laser‐induced fluorescence thermography for ethanol.
58, In: Experiments in Fluids, (6), Springer, S. 65, ISSN 1432-1114, [Online-Edition: http://dx.doi.org/10.1007/s00348-017-2349-3],
[Artikel]

Alam, Ehsanul ; Yadav, S. ; Schneider, J. ; Gambaryan-Roisman, Tatiana (2017):
Imbibition of water into substrates prepared by thermal treatment of polydimethylsiloxane layers.
521, In: Colloids and Surfaces a-Physicochemical and Engineering Aspects, S. 69-77, ISSN 0927-7757, [Online-Edition: https://doi.org/10.1016/j.colsurfa.2016.09.017],
[Artikel]

Gielok, Martin ; Lopes, Marcus ; Bonaccurso, Elmar ; Gambaryan-Roisman, Tatiana (2017):
Droplet on an elastic substrate: Finite Element Method coupled with lubrication approximation.
521, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, S. 13-21, ISSN 09277757, [Online-Edition: http://doi.org/10.1016/j.colsurfa.2016.08.001],
[Artikel]

Kumar, Abhijeet ; Dahl, Verena ; Kleinen, Jochen ; Gambaryan-Roisman, Tatiana ; Venzmer, Joachim (2017):
Influence of lipid bilayer phase behavior and substrate roughness on the pathways of intact vesicle deposition: A streaming potential study.
521, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, S. 302-311, ISSN 0927-7757, [Online-Edition: http://doi.org/10.1016/j.colsurfa.2016.07.066],
[Artikel]

Werschnik, Holger ; Schiffer, Heinz-Peter ; Steinhausen, Christoph (2017):
Robustness of a Turbine Endwall Film Cooling Design to Swirling Combustor Inflow.
33, In: Journal of Propulsion and Power, (4), AIAA, S. 917-926, ISSN 0748-4658, DOI: 10.2514/1.B36138,
[Online-Edition: https://doi.org/10.2514/1.b36138],
[Artikel]

Krause, Dennis ; Kummer, Florian (2017):
An incompressible immersed boundary solver for moving body flows using a cut cell discontinuous Galerkin method.
153, In: Computers & Fluids, S. 118-129, ISSN 00457930, DOI: 10.1016/j.compfluid.2017.05.008,
[Online-Edition: http://doi.org/10.1016/j.compfluid.2017.05.008],
[Artikel]

Oltmanns, Johannes ; Dammel, Frank ; Stephan, Peter (2017):
Modeling the heat supply system of TU Darmstadt Campus Lichtwiese.
In: Proceedings of ECOS 2017 – The 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 2-6, 2017, San Diego, California, USA, [Artikel]

Viehmann, Andreas ; Rinderknecht, Stephan ; Fischer, Sebastian ; Beidl, Christian (2017):
Plug-in-Hybride für den Volumenmarkt.
78, In: Motortechnische Zeitschrift : MTZ, (5), S. 30-39, ISSN 0024-8525, [Artikel]

Nikolopoulos, A. ; Stroh, Alexander ; Zeneli, M. ; Alobaid, F. ; Nikolopoulos, N. ; Ströhle, Jochen ; Karellas, S. ; Epple, Bernd ; Grammelis, P. (2017):
Numerical investigation and comparison of coarse grain CFD – DEM and TFM in the case of a 1 MWth fluidized bed carbonator simulation.
163, In: Chemical Engineering Science, S. 189-205, ISSN 00092509, DOI: 10.1016/j.ces.2017.01.052,
[Online-Edition: https://doi.org/10.1016/j.ces.2017.01.052],
[Artikel]

Schänzle, C. ; Dietrich, Ingo ; Corneli, T. ; Pelz, P. F. (2017):
Controlling Uncertainty in Hydraulic Drive Systems by means of a Soft Sensor Network.
In: Sensors and Instrumentation, Proceedings of the 35th IMAC, (Volume 5), [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_1601026_...],
[Artikel]

Baier, Tobias ; Hardt, Steffen ; Shahabi, Vahid ; Roohi, Ehsan (2017):
Knudsen pump inspired by Crookes radiometer with a specular wall.
2, In: Physical Review Fluids, (3), S. 033401, ISSN 2469-990X, [Online-Edition: http://dx.doi.org/10.1103/PhysRevFluids.2.033401],
[Artikel]

Pelz, P. F. ; Keil, T. ; Groß, T. F. (2017):
The transition from sheet to cloud cavitation.
817, In: Journal of Fluid Mechanics, Cambridge University Press, S. 439-454, ISSN 0022-1120, [Online-Edition: https://doi.org/10.1017/jfm.2017.75],
[Artikel]

Schmidt, Deborah ; Beidl, Christian ; Steffan, R. ; Hofmann, P. (2017):
Hybridisierung und 48 V - Eine bestechend effiziente Kombination.
In: ATZ Extra "48 V - Konzepte für die Zukunft", Springer Vieweg, [Artikel]

Schabel, Samuel ; Schwarz, Hermann (2017):
Calcium deposition in paper mills : A cost efficient approach.
13, In: Professional Papermaking, (2), S. 48-50, [Artikel]

Rot, Ivan ; Rinderknecht, Stephan (2017):
Signal Generator for Prediction of Transient Control Signals of an Automotive Transmission Control Unit Depending on Scalar Calibration Parameters.
10(1), In: SAE International Journal of Passenger Cars - Mechanical Systems, ISSN doi: 10.4271/2016-01-2155, [Artikel]

Hidouri, A. ; Chrigui, M. ; Boushaki, T. ; Sadiki, A. ; Janicka, J. (2017):
Large eddy simulation of two isothermal and reacting turbulent separated oxy-fuel jets.
192, In: Fuel, Elsevier Sci Ltd, S. 108-120, ISSN 0016-2361, DOI: 10.1016/j.fuel.2016.12.018,
[Artikel]

Altherr, Lena C. ; Pelz, P. F. ; Ederer, T. ; Pfetsch, Marc E. Optimale Getriebe auf Knopfdruck: Gemischt-ganzzahlige nichtlineare Optimierung zur Entscheidungsunterstützung bei der Auslegung von Getrieben für Kraftfahrzeuge.
In: Tagungsband Antriebstechnisches Kolloquium ATK 2017, [Artikel]

Müller, Björn ; Krämer-Eis, Stephan ; Kummer, Florian ; Oberlack, Martin (2017):
A high-order Discontinuous Galerkin method for compressible flows with immersed boundaries.
110, In: International Journal for Numerical Methods in Engineering, (1), S. 3-30, ISSN 0029-5981, [Online-Edition: http://doi.org/10.1002/nme.5343],
[Artikel]

Groche, Peter ; Übelacker, David ; Stein, Philipp ; Steinbach, Frank ; Tekkaya, A. Erman (2017):
Experimental and analytical investigation of the force requirements in shear cutting of metal-polymer-metal composites.
In: International Journal of Material Forming, Springer, ISSN 1960-6214, [Online-Edition: http://link.springer.com/article/10.1007/s12289-017-1343-x],
[Artikel]

Dayal, Ram ; Gambaryan-Roisman, Tatiana (2017):
Heat transfer in granular medium for application to selective laser melting: A numerical study.
113, In: International Journal of Thermal Sciences, S. 38-50, ISSN 12900729, [Online-Edition: https://doi.org/10.1016/j.ijthermalsci.2016.11.014],
[Artikel]

Pelz, P. F. ; Groß, T. F. ; Schänzle, C. (2017):
Hydrospeicher mit Sorbentien - Verhalten, Modellierung und Diskussion.
In: O+P – Ölhydraulik und Pneumatik 1-2, S. 42-49, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_170116_H...],
[Artikel]

Holl, M. ; Pelz, P. F. (2017):
Towards robust sustainable system design – An engineering inspired approach.
In: International Modal Analysis Conference, IMAC XXXV, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_161025_I...],
[Artikel]

Dietzel, Mathias ; Hardt, Steffen (2017):
Flow and streaming potential of an electrolyte in a channel with an axial temperature gradient.
813, In: Journal of Fluid Mechanics, S. 1060-1111, ISSN 0022-1120, [Online-Edition: http://dx.doi.org/10.1017/jfm.2016.844],
[Artikel]

Shahabi, V. ; Baier, T. ; Roohi, E. ; Hardt, Steffen (2017):
Thermally induced gas flows in ratchet channels with diffuse and specular boundaries.
7, In: Scientific Reports, (41412), [Online-Edition: http://www.nature.com/articles/srep41412],
[Artikel]

Neuwirth, Manuel ; Mester, K. ; Weiss, M. ; Bruder, E. (2017):
Material characterization in flexible flow splitting.
48, In: Materials Science & Engineering Technology, (1), S. 53 - 60, ISSN 1521-4052, [Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/mawe.201600734/ab...],
[Artikel]

Roos, Michael ; Wagner, Christian ; Weber Martins, Thiago ; Albrecht, Katharina ; Anderl, Reiner ; Kirchner, Eckhard (2017):
Manufacturing-integrated product solutions: Design support between product function and manufacturing processes.
48, In: Materialwissenschaft und Werkstofftechnik, (1), WILEY-VCH Verlag, S. 12-26, ISSN 1521-4052, [Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/mawe.201600727/fu...],
[Artikel]

Fischer, Sebastian ; Sahu, R. P. ; Sinha-Ray, S. ; Yarin, A. L. ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2017):
Effect of nano-textured heater surfaces on evaporation at a single meniscus.
108, In: International Journal of Heat and Mass Transfer, S. 2444-2450, ISSN 00179310, [Online-Edition: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.01.079],
[Artikel]

Neuwirth, Manuel ; Özel, Mahmut ; Groche, Peter (2017):
Process Characteristics in Flexible Flow Splitting.
87, In: Steel Research International, [Online-Edition: http://dx.doi.org/10.1002/srin.201600370],
[Artikel]

Abele, Eberhard ; Baier, Christian ; Tepper, Cornelia ; Bay, Stephan ; Kuhn, Clemens (2017):
Bessere Qualitätsschleifen.
26, In: Form + Werkzeug, Carl Hanser Verlag, München, (4), S. 62-63, ISSN 1439-667X, [Artikel]

Abele, Eberhard ; Bretz, Andreas (2017):
Werkzeugverlagerung beim Reiben - Entwicklung sensorischer Werkzeuge zur Erkennung von Prozessstörungen.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1-2), S. 21-26, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Chryssolouris, George ; Sihn, Wilfried ; Metternich, Joachim ; ElMaraghy, Hoda ; Seliger, Günther ; Sivard, Gunilla ; ElMaraghy, Waguih ; Hummel, Vera ; Tisch, Michael ; Seifermann, Stefan (2017):
Learning Factories for Future Oriented Research and Education in Manufacturing.
66, In: CIRP Annals – Manufacturing Technology, Elsevier Ltd on behalf of CIRP, (2), S. 803-826, ISSN 0007-8506, DOI: 10.1016/j.cirp.2017.05.005,
[Online-Edition: https://doi.org/10.1016/j.cirp.2017.05.005],
[Artikel]

Abele, Eberhard ; Daume, Christian ; Sielaff, Tilo (2017):
Lagerungsalternativen durch Einsatz von Synchronreluktanztechnologie in Motorspindeln.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (7/8), S. 492-499, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Flum, Dominik ; Strobel, Nina (2017):
A Systematic Approach for Designing Learning Environments for Energy Efficiency in Industrial Production.
9, In: Procedia Manufacturing, 7th Conference on Learning Factories, Darmstadt, Elsevier B.V., S. 9-16, ISSN 2351-9789, [Online-Edition: https://doi.org/10.1016/j.promfg.2017.04.001],
[Artikel]

Abele, Eberhard ; Frensch, Ann-Christin ; Junge, Felix (2017):
Energieeffizienz in der wässrigen Bauteilreinigung.
150, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (10), S. 81-83, ISSN 0043-2792, [Artikel]

Abele, Eberhard ; Haddadian, Kaveh (2017):
Softwarebasierte Ermittlung der statischen Verlagerung des Toll Center Point bei der roboterbasierten Zerspanung.
In: Ingenieurspiegel | Maschinenbau, Public Verlagsgesellschaft, Bingen, (3), S. 17-19, [Artikel]

Abele, Eberhard ; Haddadian, Kaveh ; Baier, Christian ; Hähn, Felix ; Kuhn, Clemens (2017):
Presswerkzeugbau: Lean Tryout | Tool & Die Shop: Lean Tryout.
In: Fachtagung Mechatronik 2017 Dresden, 09.-10. März 2017, S. 191-197, [Artikel]

Abele, Eberhard ; Hasenfratz, Christian (2017):
Kavitäten in Titan-Blisks produktiver fertigen.
150, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (10), S. 24-27, ISSN 0043-2792, [Artikel]

Abele, Eberhard ; Hasenfratz, Christian ; Beltrop, Martin (2017):
Spanende Fertigung von sicherheitsrelevanten rotierenden Triebwerkskomponenten.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (11), S. 806-810, [Artikel]

Abele, Eberhard ; Hasenfratz, Christian ; Bücker, Markus (2017):
Modeling of Process Forces with Respect to Technology Paramters and Tool wear in Milling Ti6Al4V.
11, In: Production Engineering : WGP, Springer Verlag, Heidelberg, (3), S. 285-294, ISSN 0944-6524, DOI: 10.1007/s11740-017-0739-2,
[Artikel]

Abele, Eberhard ; Hasenfratz, Christian ; Geßner, Felix (2017):
Analyse zur Anfahrstrategie beim Flankenfräsen - Entwicklung eines Kennwerts zur Bewertung von Anfahrstrategien beim Flankenfräsen von TiAl6V4.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1-2), S. 2-7, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Hasenfratz, Christian ; Praetzas, Christopher ; Schüler, Guido ; Stark, Christian ; Kannwischer, Markus (2017):
Schruppfräsbearbeitung von Verdichterscheiben.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (9), S. 674-680, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Hasenfratz, Christian ; Praetzas, Christopher ; Stark, Christian ; Kannwischer, Markus ; Wichlas, Nick (2017):
Process Design for Rough Machining of Ti6Al4V Integral Components.
14, In: Procedia Manufacturing, 17th Machining Innovations Conference for Aerospace Industry, Garbsen, Elsevier B.V., S. 118-127, ISSN 2351-9789, DOI: 10.1016/j.promfg.2017.11.014,
[Online-Edition: https://doi.org/10.1016/j.promfg.2017.11.014],
[Artikel]

Abele, Eberhard ; Heep, Thomas ; Feßler, Philipp (2017):
Laseradditiv gefertigter Drehhalter für die prozesssichere CO2-Schneestrahlkühlung - Einsatzverhalten von beschichtetem Hartmetall beim Drehen von Vermicularguss.
In: Diamond Business, diamond business KG, Eltmann, (60), S. 66-73, ISSN 1619-5558, [Artikel]

Abele, Eberhard ; Lautenschläger, Nils (2017):
Untersuchung des Einflusses der Nebenschneiden auf den Reibprozess.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1/2), S. 27-33, ISSN 1436-4980, [Artikel]

Abele, Eberhard ; Praetzas, Christopher (2017):
Schneidstoffabhängige Standzeitanalyse bei Beeinflussung der Prozesstemperatur.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (5), S. 305 - 309, ISSN 0947-0085, [Artikel]

Abele, Eberhard ; Unterderweide, Florian ; Holland, Lars (2017):
Experimentelle Untersuchungen zur stabilen und instabilen Käfigbewegung eines Schrägkugellagers.
In: 12. VDI-Fachtagung Gleit- und Wälzlagerungen 2017, VDI-Berichte Nr. 2308, VDI-Verlag, Düsseldorf, [Artikel]

Ahola, Marja Birgit (2017):
APV Darmstadt - Jahrestagung 2017.
145, In: Wochenblatt für Papierfabrikation, (12), S. 850-8853, [Artikel]

Alobaid, Falah ; Mertens, Nicolas ; Starkloff, Ralf ; Lanz, Thomas ; Heinze, Christian ; Epple, Bernd (2017):
Progress in dynamic simulation of thermal power plants.
59, In: Progress in Energy and Combustion Science, S. 79-162, ISSN 0360-1285, [Online-Edition: http://dx.doi.org/10.1016/j.pecs.2016.11.001],
[Artikel]

Altherr, Lena C. ; Dörig, B. ; Ederer, T. ; Pelz, P. F. ; Pfetsch, Marc E. ; Wolf, J. (2017):
A Mixed-Integer Nonlinear Program for the Design of Gearboxes.
In: Operations Research Proceedings 2016: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, [Artikel]

Batzdorf, Stefan ; Breitenbach, Jan ; Schlawitschek, Christiane ; Roisman, Ilia V. ; Tropea, Cameron ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2017):
Heat transfer during simultaneous impact of two drops onto a hot solid substrate.
113, In: International Journal of Heat and Mass Transfer, S. 898-907, ISSN 0017-9310, [Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.091],
[Artikel]

Bauer, Dennis ; Abele, Eberhard ; Ahrens, Raphael ; Bauernhansl, Thomas ; Fridgen, Gilbert ; Jarke, Matthias ; Keller, Fabian ; Keller, Robert ; Pullmann, Jaroslav ; Reiners, René ; Reinhart, Gunther ; Schel, Daniel ; Schöpf, Michael ; Schraml, Philipp ; Simon, Peter (2017):
Flexible IT-platform to Synchronize Energy Demands with Volatile Markets.
63, In: Procedia CIRP, 50th CIRP Conference on Manufacturing Systems, Taichung City (China), Elsevier B.V., S. 318-323, ISSN 2212-8271, DOI: http://creativecommons.org/licenses/by-nc-nd/4.0/,
[Online-Edition: https://doi.org/10.1016/j.procir.2017.03.088],
[Artikel]

Bauerdick, Christoph ; Helfert, Mark ; Menz, Benjamin ; Abele, Eberhard (2017):
A Common Software Framework for Energy Data Based Monitoring and Controlling for Machine Power Peak Reduction and Workpiece Quality Improvements.
61, In: Procedia CIRP, 24th CIRP Conference on Life Cycle Engineering, Kamakura (Japan) Elsevier B.V., S. 359-364, ISSN 2212-8271, DOI: 10.1016/j.procir.2016.11.226,
[Online-Edition: https://doi.org/10.1016/j.procir.2016.11.226],
[Artikel]

Beblein, Sascha ; Breidenstein, Bernd ; Denkena, Berend ; Pusch, Casper ; Hoche, Holger ; Oechsner, Matthias (2017):
Thermomechanical coating load in dependence of fundamental coating properties.
In: Procedia CIRP 58 (2017), S. 25 – 30. ISSN 2212-8271 <reviewed>, [Artikel]

Beckerle, Philipp (2017):
Proceedings of the first workshop on Peripheral Machine Interfaces: going beyond traditional Surface electromyography.
11:32, In: Frontiers in Neurorobotics, [Artikel]

Beckerle, Philipp ; Christ, O. ; Schürmann, T. ; Vogt, J. ; Rinderknecht, Stephan ; Stryk, Oskar von (2017):
A human-machine-centered design method for (powered) lower limb prosthetics.
95, In: Robotics and Autonomous Systems, Elsevier, S. 1-12, [Artikel]

Beckerle, Philipp ; Salvietti, G. ; Unal, R. ; Mastrogiovanni, F. (2017):
Human-oriented approaches for assistive and rehabilitation robotics – Engineering methods, technical implementation, and treatment.
96C, In: Robotics and Autonomous Systems, S. 238-241, [Artikel]

Beckerle, Philipp ; Salvietti, G. ; Unal, R. ; Prattichizzo, D. ; Rossi, S. ; Castellini, C. ; Hirche, S. ; Endo, S. ; Amor, H.B. ; Ciocarlie, M. ; Mastrogiovanni, F. ; Argall, B.D. ; Bianchi, M. (2017):
A Human–Robot Interaction Perspective on Assistive and Rehabilitation Robotics.
11, In: Frontiers in Neurorobotics, ISSN 1662-5218, [Online-Edition: https://doi.org/10.3389/fnbot.2017.00024],
[Artikel]

Beckerle, Philipp ; Salvietti, G. ; Unal, R. ; Prattichizzo, D. ; Rossi, S. ; Castellini, C. ; Hirche, S. ; Endo, S. ; Ben Amor, H. ; Ciocarlie, M. ; Mastrogiovanni, F. ; Argall, B.D. ; Bianchi, M. (2017):
A Human-Robot Interaction Perspective on Assistive and Rehabilitation Robotics.
11:24, In: Frontiers in Neurorobotics, [Artikel]

Beckerle, Philipp ; Stuhlenmiller, Florian ; Rinderknecht, Stephan (2017):
Stiffness Control of Variable Serial Elastic Actuators: Energy Efficiency through Exploitation of Natural Dynamics.
6 (4), 28, In: Actuators, [Artikel]

Biehler, Jasmin ; Hoche, Holger ; Oechsner, Matthias (2017):
Corrosion properties of polished and shot-peened austenitic stainless steel 304L and 316L with and without plasma nitriding.
In: Surface & Coatings Technology 313 (2017), S. 40 – 46 (available online: 16 January 2017). ISSN 0257-8972 <reviewed>, [Artikel]

Biehler, Jasmin ; Hoche, Holger ; Oechsner, Matthias (2017):
Nitriding behavior and corrosion properties of AlSl 304L and 316L austenitic stainless steel with deformation-induced martensite.
In: Surface & Coatings Technology 324 (2017), S. 121 – 128 (available online: 23 May 2017). ISSN 0257-8972 <reviewed>, [Artikel]

Bobzin, Kirsten ; Zhao, Lidong ; Öte, Mehmet ; Königstein, Tim ; Oechsner, Matthias ; Siebers, Marius ; Andersohn, Georg ; Ellermeier, Jörg (2017):
Entwicklung einer neuartigen wirtschaftlichen, eisenbasierten Beschichtung zur Erhöhung der Lebensdauer von Gussbauteilen unter dem Gesichtspunkt der Korrosionsbeständigkeit. – Development of a novel economical iron-based coating to increase lifetime of components of cast irons in terms of corrosion.
In: Materialwissenschaft und Werkstofftechnik 48 (2017), 9, S. 922 – 935. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Bork, B. ; Preusche, A. ; Weckenmann, F. ; Lamanna, G. ; Dreizler, A. (2017):
Measurement of species concentration and estimation of temperature in the wake of evaporating n-heptane droplets at trans-critical conditions.
36, In: Proceedings of the Combustion Institute, (2), S. 2433-2440, ISSN 1540-7489, [Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.07.037],
[Artikel]

Breitenbach, Jan ; Roisman, Ilia V. ; Tropea, Cameron (2017):
Heat transfer in the film boiling regime: Single drop impact and spray cooling.
110, In: International Journal of Heat and Mass Transfer, S. 34-42, ISSN 00179310, [Online-Edition: https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.004],
[Artikel]

Brumm, Pauline ; Dörsam, Edgar ; Nguyen, Duy Linh ; Schmitt-Lewen, Martin (2017):
Quality control of embossed holograms by measuring gloss and color values.
6, In: JPMTR, (1), S. 7-18, DOI: 10.14622/JPMTR-1701,
[Online-Edition: http://dx.doi.org/10.14622/JPMTR-1701],
[Artikel]

Brune, Alexander ; Weber Martins, Thiago ; Anderl, Reiner (2017):
Morphing boxes for the integration of shape optimization in the product design process.
0, In: Computer-Aided Design and Applications, (0), Taylor & Francis, S. 1-8, DOI: 10.1080/16864360.2017.1375672,
[Online-Edition: http://dx.doi.org/10.1080/16864360.2017.1375672],
[Artikel]

Buhl, S. ; Dietzsch, F. ; Buhl, C. ; Hasse, C. (2017):
Comparative study of turbulence models for scale-resolving simulations of internal combustion engine flows.
156, In: Computers & Fluids, Elsevier, S. 66 - 80, ISSN 0045-7930, DOI: 10.1016/j.compfluid.2017.06.023,
[Online-Edition: https://doi.org/10.1016/j.compfluid.2017.06.023],
[Artikel]

Buhl, S. ; Gleiss, F. ; Köhler, M. ; Hartmann, F. ; Messig, D. ; Brücker, C. ; Hasse, C. (2017):
A Combined Numerical and Experimental Study of the 3D Tumble Structure and Piston Boundary Layer Development During the Intake Stroke of a Gasoline Engine.
98, In: Flow, Turbulence and Combustion, ERCOFTAC, S. 579-600, ISSN 1573-1987, DOI: 10.1007/s10494-016-9754-1,
[Online-Edition: http://dx.doi.org/10.1007/s10494-016-9754-1],
[Artikel]

Buhl, S. ; Hartmann, F. ; Kaiser, S. A. ; Hasse, C. (2017):
Investigation of an IC Engine Intake Flow Based on Highly Resolved LES and PIV.
72, In: Oil & Gas Science and Technology : Revue de l'Institut Francais du Petrole, (3), Institut Français du Pétrole (IFP) ; EDP Sciences, S. 15, ISSN 1953-8189, DOI: 10.2516/ogst/2017012,
[Online-Edition: https://doi.org/10.2516/ogst/2017012],
[Artikel]

Busse, Alexander ; Meudt, Tobias ; Metternich, Joachim (2017):
Einsatz digitaler Systeme zur Prozessüberwachung.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (10), S. 652-657, ISSN 0947-0085, [Artikel]

Bölling, Christian ; Hacker, Michael ; Abele, Eberhard (2017):
Pulvermetallurgische Stahlllegierungen für Ventilsitze.
150, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (5), S. 31-34, ISSN 0043-2792, [Artikel]

Bölling, Christian ; Kuhne, Milla ; Abele, Eberhard (2017):
Modeling of Process Forces with Consideration of Tool Wear for Machining of Sintered Steel Alloy for Application to Valve Seat in a Combustion Engine.
11, In: Production Engineering : WGP, Springer Verlag, Heidelberg, (4-5), S. 477-485, ISSN 0944-6524, DOI: 10.1007/s11740-017-0759-y,
[Artikel]

Cloos, F.-J. ; Stapp, D. ; Pelz, P. F. (2017):
Swirl boundary layer and flow separation at the inlet of a rotating pipe.
811, In: Journal of Fluid Mechanics, S. 350-371, ISSN 0022-1120, [Online-Edition: http://dx.doi.org/10.1017/jfm.2016.734],
[Artikel]

Cloos, F.-J. ; Zimmermann, Anna- L. ; Pelz, P. F. (2017):
Two turbulent flow regimes at the inlet of a rotating pipe.
61,2, In: European Journal of Mechanics B-Fluids, (1/2), Elsevier, S. 330-335, ISSN 0997-7546, [Online-Edition: http://dx.doi.org/10.1016/j.euromechflu.2016.09.003],
[Artikel]

Cordes, Ulrike ; Kampers, G. ; Meissner, T. ; Tropea, C. ; Peinke, J. ; Hoelling, M. (2017):
Note on the limitations of the Theodorsen and Sears functions.
811, In: Journal of Fluid Mechanics, ISSN 0022-1120, [Online-Edition: http://dx.doi.org/10.1017/jfm.2016.780],
[Artikel]

Debiagi, P. ; Trinchera, M. ; Frassoldati, A. ; Faravelli, T. ; Vinu, R. ; Ranzi, E. (2017):
Algae characterization and multistep pyrolysis mechanism.
128, In: Journal of Analytical and Applied Pyrolysis, Elsevier, S. 423-436, ISSN 0165-2370; 1873-250X, [Artikel]

Dierkes, Dominik ; Oberlack, Martin (2017):
Euler and Navier–Stokes equations in a new time-dependent helically symmetric system: derivation of the fundamental system and new conservation laws.
818, In: Journal of Fluid Mechanics, S. 344-365, ISSN 0022-1120, [Online-Edition: http://doi.org/10.1017/jfm.2017.74],
[Artikel]

Dietrich, Dagmar ; Lampke, Thomas ; Nolze, Gert ; Del-Solar-Velarde, Nino ; Nickel, Daniela ; Chapoulie, Remy ; Castillo Butters, Luis Jaime (2017):
The potential of EBSD and EDS for ceramics investigations – case studies on sherds of pre-Columbian potters.
In: Archaeometry 60 (2018), 3, S. 489 – 501 (accepted: 22 February 2017). ISSN 1475-4754 <reviewed>, [Artikel]

Dietrich, Dagmar ; Mehner, Thomas ; Del-Solar-Velarde, Nino ; Nickel, Daniela ; Lampke, Thomas ; Chapoulie, Remy ; Castillo Butters, Luis Jaime (2017):
Archaeometric case studies on decorations of pre-Columbian pottery using X-ray spectroscopy maps and profiles. – Archäometrische Fallstudien an vorkolumbischer Keramik mittels Röntgenspektroskopie-Karten und -Profilen.
In: Materialwissenschaft und Werkstofftechnik 48 (2017), 6, S. 485 – 494. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Egger, H. ; Seitz, T. ; Tropea, C. (2017):
Enhancement of flow measurements using fluid-dynamic constraints.
344, In: Journal of Computational Physics, S. 558-574, ISSN 00219991, [Online-Edition: https://doi.org/10.1016/j.jcp.2017.04.080],
[Artikel]

Emamy, Nehzat ; Kummer, Florian ; Mrosek, Markus ; Karcher, Martin ; Oberlack, Martin (2017):
Implicit-explicit and explicit projection schemes for the unsteady incompressible Navier-Stokes equations using a high-order dG method.
In: Computers & Fluids, ISSN 00457930, [Online-Edition: http://doi.org/10.1016/j.compfluid.2017.06.003],
[Artikel]

Enke, Judith ; Glass, Rupert ; Metternich, Joachim (2017):
Introducing a Maturity Model for Learning Factories.
9, In: Procedia Manufacturing, 7th Conference on Learning Factories, Darmstadt, Elsevier B.V., S. 1-8, ISSN 2351-9789, DOI: 10.1016/j.promfg.2017.04.010,
[Online-Edition: https://doi.org/10.1016/j.promfg.2017.04.010],
[Artikel]

Enke, Judith ; Kaiser, Joscha ; Metternich, Joachim (2017):
Die Lernfabrik als Export-Erfolg.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (10), S. 644-647, ISSN 0947-0085, [Artikel]

Enke, Judith ; Meister, Maximilian ; Metternich, Joachim ; Genne, Michael ; Brosche, Justus (2017):
Der Weg zur Lean Quality 4.0 | Weiterentwicklung der Qualitätsinstrumente schlanker Produktionssysteme durch Industrie 4.0.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, (9), Hanser, S. 612-615, ISSN 0947-0085, [Artikel]

Falk, Paul Michael ; Dammel, Frank ; Stephan, Peter (2017):
Exergy analyses of heat supply systems for a building cluster with CARNOT.
20, In: International Journal of Thermodynamics, S. 191-198, ISSN 1301-9724, DOI: 10.5541/eoguijt.299926,
[Online-Edition: http://dergipark.gov.tr/download/issue-file/7011],
[Artikel]

Felger, Julian ; Becker, Wilfried (2017):
Asymptotic analysis of notch induced crack nucleation.
17, In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 239-240, ISSN 1617-7061, DOI: 10.1002/pamm.201710089,
[Artikel]

Felger, Julian ; Becker, Wilfried (2017):
A complex potential method for the asymptotic solution of wedge problems using first-order shear deformation plate theory.
61, In: European Journal of Mechanics - A/Solids, S. 383-392, ISSN 0997-7538, DOI: 10.1016/j.euromechsol.2016.09.016,
[Artikel]

Felger, Julian ; Stein, Nicolas ; Becker, Wilfried (2017):
Asymptotic finite fracture mechanics solution for crack onset at elliptical holes in composite plates of finite width.
182, In: Engineering Fracture Mechanics, Elsevier, S. 621-634, ISSN 0013-7944, [Online-Edition: https://dx.doi.org/10.1016/j.engfracmech.2017.05.048],
[Artikel]

Felger, Julian ; Stein, Nicolas ; Becker, Wilfried (2017):
Mixed-mode fracture in openhole composite plates of finite-width: an asymptotic coupled stress and energy approach.
122–123, In: International Journal of Solids and Structures, Elsevier, S. 14-24, ISSN 0020-7683, [Online-Edition: https://dx.doi.org/10.1016/j.ijsolstr.2017.05.039],
[Artikel]

Franke, Wilken ; Stein, Philipp ; Ackermann, Annika ; Groche, Peter (2017):
Umformung mit Dampf.
11, In: Wochenblatt für Papierfabrikation, S. 748-749, [Artikel]

Freudigmann, H.-A. ; Dörr, Aaron ; Iben, Uwe ; Pelz, P. F. (2017):
Modeling of Cavitation-Induced Air Release Phenomena in Micro-Orifice Flows.
139, In: Journal of Fluids Engineering, (11), S. 111301, ISSN 0098-2202, DOI: 10.1115/1.4037048,
[Online-Edition: https://doi.org/10.1115/1.4037048],
[Artikel]

Frigge, Lorenz ; Ströhle, Jochen ; Epple, Bernd (2017):
Release of sulfur and chlorine gas species during coal combustion and pyrolysis in an entrained flow reactor.
201, In: Fuel, S. 105-110, ISSN 00162361, [Online-Edition: https://doi.org/10.1016/j.fuel.2016.11.037],
[Artikel]

Gauding, M. ; Dietzsch, F. ; Goebbert, J. H. ; Thévenin, D. ; Abdelsamie, A. ; Hasse, C. (2017):
Dissipation element analysis of a turbulent non-premixed jet flame.
29, In: Physics of Fluids, (8), American Institute of Physics, S. 085103, ISSN 1089-7666, DOI: 10.1063/1.4991574,
[Online-Edition: http://dx.doi.org/10.1063/1.4991574],
[Artikel]

Gayduschek, Martina ; Simon, Michael ; Spiehl, Dieter ; Finsterwalder, Florian ; Dörsam, Edgar (2017):
Einfluss und Charakterisierung der Oberflächenstruktur von per selektivem Laser-Sintern hergestellten Bauteilen zur Qualifizierung für den Digitaldruck.
13, In: Zeitschrift Kunststofftechnik - Journal of Plastics Technology, (4), Carl Hanser Verlag GmbH & Co. KG, S. 255-280, DOI: 10.3139/O999.03042017,
[Online-Edition: http://dx.doi.org/10.3139/O999.03042017],
[Artikel]

Gentile, G. ; Debiagi, P. ; Cuoci, A. ; Frassoldati, A. ; Ranzi, E. ; Faravelli, T. (2017):
A computational framework for the pyrolysis of anisotropic biomass particles.
321, In: Chemical Engineering Journal, Elsevier, S. 458-473, [Artikel]

Groche, Peter ; Becker, Marco ; Pabst, Christian (2017):
Process window acquisition for impact welding processes.
118, In: Materials & Design, Elsevier, S. 286-293, ISSN 0264-1275, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S0264127517...],
[Artikel]

Groche, Peter ; Franke, Wilken ; Ackermann, Annika (2017):
Ansätze zur verbesserten Umformung von Papier.
10, In: Werkstattstechnik online: wt, Springer VDI Verlag, Düsseldorf, S. 714-718, [Artikel]

Groche, Peter ; Hoppe, Florian ; Sinz, Julian (2017):
Stiffness of multipoint servo presses: Mechanics vs. control.
66, In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, S. 373-376, DOI: 10.1016/j.cirp.2017.04.053,
[Artikel]

Groche, Peter ; Kessler, Thomas ; Huttel, Dominik (2017):
Online-Konturvermessung beim Profilbiegen.
11/12, In: Werkstatttechnik online: wt, Springer VDI Verlag, Düsseldorf, S. 804-807, [Artikel]

Groche, Peter ; Kramer, Philipp (2017):
Numerical investigation of the influence of frictional conditions in thread rolling operations with flat dies.
56, In: International Journal of Material Forming, S. 17, [Artikel]

Groche, Peter ; Krech, Martin (2017):
Efficient production of sensory machine elements by a two-stage rotary swaging process—Relevant phenomena and numerical modelling.
242, In: Journal of Materials Processing Technology, Elsevier, S. 205-217, ISSN 0924-0136, [Online-Edition: http://dx.doi.org/10.1016/j.jmatprotec.2016.11.034],
[Artikel]

Groche, Peter ; Köhler, Stefan ; Husmann, Henning ; Kurpiers, Chantal (2017):
Erweiterung von Grenzen der Stegblechumformung.
10, In: Wt Werkstattstechnik online, S. 689-694, [Artikel]

Groche, Peter ; Monnerjahn, Vinzent ; Özel, Mahmut ; Yu, Yufan (2017):
Remote joining by plastic deformation in the process of linear flow splitting.
246, In: Journal of Materials Processing Technology, S. 262-266, ISSN 0924-0136, [Artikel]

Groche, Peter ; Traub, Tilman ; Hohmann, Johannes (2017):
Industrie 4.0 beim Walzprofilieren.
1, In: Blechnet, S. 11, [Artikel]

Groche, Peter ; Übelacker, David ; Stahlmann, Jörg (2017):
Ereignisorientierte Gesamthubüberwachung in Umformprozessen - Präzise Prozessdaten erlauben sichere Fehlerdiagnosen und effiziente Verbesserungen.
1, In: productivITy, S. 55-58, [Artikel]

Gronarz, Tim ; Schulze, Jan ; Laemmerhold, Mischka ; Graeser, Philipp ; Gorewoda, Jeanette ; Kez, Vitali ; Habermehl, Martin ; Schiemann, Martin ; Ströhle, Jochen ; Epple, Bernd ; Scherer, Viktor ; Kneer, Reinhold (2017):
Quantification of the influence of parameters determining radiative heat transfer in an oxy-fuel operated boiler.
157, In: Fuel Processing Technology, S. 76-89, ISSN 03783820, DOI: 10.1016/j.fuproc.2016.11.012,
[Online-Edition: https://doi.org/10.1016/j.fuproc.2016.11.012],
[Artikel]

Groß, T. F. ; Pelz, P. F. (2017):
Diffusion-driven nucleation from surface nuclei in hydrodynamic cavitation.
830, In: Journal of Fluid Mechanics, S. 138-164, ISSN 0022-1120, DOI: 10.1017/jfm.2017.587,
[Online-Edition: https://doi.org/10.1017/jfm.2017.587],
[Artikel]

Groß, T. F. ; Pöttgen, P. F. ; Pelz, P. F. (2017):
Analytical Approach for the Optimal Operation of Pumps in Booster Systems.
143, In: Journal of Water Resources Planning and Management, (8), S. 04017029, ISSN 0733-9496, DOI: 10.1061/(asce)wr.1943-5452.0000776,
[Online-Edition: https://doi.org/10.1061/(asce)wr.1943-5452.0000776],
[Artikel]

Hagedorn, Peter ; Karev, Artem ; Hochlenert, Daniel (2017):
Atypical parametric instability in linear and nonlinear systems.
199, In: Procedia Engineering, S. 657-662, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.09.118,
[Online-Edition: https://doi.org/10.1016/j.proeng.2017.09.118],
[Artikel]

Hahn, Paul ; Schwienheer, Michael ; Kontermann, Christian ; Oechsner, Matthias (2017):
Modeling of creep and stress relaxation of the nickel-base alloy NiCr20TiAl at isothermal and non-isothermal loading conditions. – Modellierung des Kriech- und Spannungsrelaxationsverhaltens des Nickelbasiswerkstoffes NiCr20TiAl unter isothermen und anisothermen Beanspruchungen.
In: Materialwissenschaft und Werkstofftechnik 48 (2017), 11, S. 1070 – 1081. ISSN 0933-5137, 1521-4052 <reviewed>, [Artikel]

Hambach, Jens ; Kümmel, Kilian ; Metternich, Joachim (2017):
Development of a Digital Continuous Improvement System for Production.
63, In: Procedia CIRP, Manufacturing Systems 4.0 – 50th CIRP Conference on Manufacturing Systems, Taichung, (China), Elsevier B.V., S. 330-335, DOI: 10.1016/j.procir.2017.03.086,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S2212827117...],
[Artikel]

Hambach, Jens ; Müller, Lea ; Metternich, Joachim (2017):
Evaluation of Coaching Success for the Continuous Improvement Process – How to Distinguish a Good Leader in CI?
9, In: Procedia Manufacturing, 7th Conference on Learning Factories, Darmstadt, Elsevier B.V, S. 331-338, ISSN 2351-9798, [Online-Edition: https://doi.org/10.1016/j.promfg.2017.04.044],
[Artikel]

Hambach, Jens ; Reiß, Julia ; Tenberg, Ralf ; Tisch, Michael ; Metternich, Joachim (2017):
Lernkonzepte für eine wandlungsfähige Produktion.
5, In: Journal of Technical Education (JOTED), (1), S. 100-132, ISSN 2198-0306, [Artikel]

Hau, Jan-Niklas ; Oberlack, Martin ; Chagelishvili, George (2017):
On the optimal systems of subalgebras for the equations of hydrodynamic stability analysis of smooth shear flows and their group-invariant solutions.
58, In: Journal of Mathematical Physics, (4), S. 043101, ISSN 0022-2488, [Online-Edition: http://doi.org/10.1063/1.4980055],
[Artikel]

Heep, Thomas ; Abele, Eberhard (2017):
Additiv gefertigtes Drehhaltersystem - Einfluss der Zuführstrategie von kryogener Kühlung mit CO2-Schnee auf die thermomechanische Schneidstoffbelastung.
107, In: Werkstattstechnik online: wt, Springer VDI Verlag, Düsseldorf, (6), S. 420-425, ISSN 1436-4980, [Artikel]

Hell, Matthias ; Wagener, Rainer ; Kaufmann, Heinz ; Melz, Tobias (2017):
Fatigue Assessment with Special Respect to Size Effects and Material Behavior within Local Strain-Based Approaches.
Volume, In: WCX™ 17: SAE World Congress Experience, (1), ISSN doi: 10.4271/2017-01-0356, [Artikel]

Herdel, Philipp ; Krause, David ; Peters, Jens ; Kolmorgen, Brigga ; Ströhle, Jochen ; Epple, Bernd (2017):
Experimental investigations in a demonstration plant for fluidized bed gasification of multiple feedstock’s in 0.5 MWth scale.
205, In: Fuel, S. 286-296, ISSN 00162361, [Online-Edition: https://doi.org/10.1016/j.fuel.2017.05.058],
[Artikel]

Hertle, Christian ; Hambach, Jens ; Meißner, Alyssa ; Rossmann, Sven ; Metternich, Joachim ; Rieger, Jürgen (2017):
Digitales Shopfloor Management - Neue Impulse für die Verbesserung der Werkstatt.
22, In: PRODUCTIVITY Management, GITO Verlag, Berlin, (1), S. 59-61, ISSN 1868-8519, [Artikel]

Hertle, Christian ; Jokovic, Benjamin ; Weber, Claudia ; Tisch, Michael ; König, Christina ; Meißner, Alyssa ; Ardelt, Thomas ; Bruder, Ralph ; Metternich, Joachim ; Tenberg, Ralf (2017):
Innovative Approaches for Technical, Methodological, and Sociocommunicative Competency Development in Production Areas.
9, In: Procedia Manufacturing, 7th Conference on Learning Factories, Elsevier B.V., S. 299-306, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S2351978917...],
[Artikel]

Hertle, Christian ; Tisch, Michael ; Metternich, Joachim ; Abele, Eberhard (2017):
Das Darmstädter Shopfloor Management-Modell.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (3), S. 118-120, ISSN 0947-0085, [Artikel]

Heß, Julian ; Wang, Yongqi ; Hutter, Kolumban (2017):
Thermodynamically consistent modeling of granular-fluid mixtures incorporating pore pressure evolution and hypoplastic behavior.
29, In: Continuum Mechanics and Thermodynamics, (1), S. 311-343, ISSN 0935-1175, [Online-Edition: http://dx.doi.org/10.1007/s00161-016-0535-9],
[Artikel]

Hilz, Jochen ; Haaf, Martin ; Helbig, Martin ; Ströhle, Jochen ; Epple, Bernd (2017):
Calcium Carbonate Looping: CO2 capture by using limestone in the cement industry.
In: Cement International, (15), S. 52-63, [Artikel]

Hilz, Jochen ; Helbig, Martin ; Haaf, Martin ; Daikeler, Alexander ; Ströhle, Jochen ; Epple, Bernd (2017):
Long-term pilot testing of the carbonate looping process in 1 MWth scale.
210, In: Fuel, S. 892-899, ISSN 00162361, DOI: 10.1016/j.fuel.2017.08.105,
[Online-Edition: https://doi.org/10.1016/j.fuel.2017.08.105],
[Artikel]

Hoche, Holger ; Oechsner, Matthias (2017):
Fractures in high-strength bolts due to hydrogen induced stress corrosion – causes and corrective actions. – Brüche hochfester Schrauben infolge wasserstoffinduzierter Spannungsrisskorrosion – Ursachen und Abhilfemaßnahmen.
In: Pract. Metallogr. 54 (2017), 3, S. 178 – 211. ISSN 0032-678X <reviewed>, [Artikel]

Hunger, F. ; Zulkifli, M. F. ; Williams, B. A. O. ; Beyrau, F. ; Hasse, C. (2017):
Comparative flame structure investigation of normal and inverse turbulent non-premixed oxy-fuel flames using experimentally recorded and numerically predicted Rayleigh and OH-PLIF signals.
36, In: Proceedings of the Combustion Institute, (2), Elsevier, S. 1713 - 1720, ISSN 1540-7489, DOI: 10.1016/j.proci.2016.06.183,
[Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.06.183],
[Artikel]

Ivanova, J. ; Petrova, T. ; Kirilova, E. ; Becker, Wilfried (2017):
Optimal parameters of a dynamically loaded patch/layer structure against the elastic-brittle interface debonding.
65, In: Engineering Transactions, S. 97-103, [Artikel]

Izdebska-Podsiadły, Joanna ; Dörsam, Edgar (2017):
Effects of argon low temperature plasma on PLA film surface and aging behaviors.
145, In: Vacuum, S. 278-284, ISSN 0042207X, DOI: 10.1016/j.vacuum.2017.09.001,
[Online-Edition: https://doi.org/10.1016/j.vacuum.2017.09.001],
[Artikel]

Jainski, Christopher ; Rissmann, Martin ; Boehm, Benjamin ; Dreizler, Andreas (2017):
Experimental investigation of flame surface density and mean reaction rate during flame-wall interaction.
36, In: Proceedings of the Combustion Institute, (2), S. 1827-1834, ISSN 1540-7489, [Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.07.113],
[Artikel]

Jallouf, S. ; Pluvinage, G. ; Casavola, K. ; Pappalettere, C. (2017):
A probabilistic fatigue assessment diagram to get a guaranteed lifetime with a low probability of failure.
79, In: Engineering Failure Analysis, Elsevier, S. 330-341, ISSN 1350-6307, DOI: 10.1016/j.engfailanal.2017.05.024,
[Artikel]

Jekel, Dominic ; Hagedorn, Peter (2017):
Optimization of Damping for Squeal Avoidance in Disc Brakes.
17, In: Proceedings in Applied Mathematics and Mechanics (PAMM), (1), John Wiley and Sons, S. 373-374, ISSN 1617-7061, DOI: 10.1002/pamm.201710156,
[Artikel]

Jekel, Dominic ; Hagedorn, Peter (2017):
Stability of weakly damped MDGKN-systems: The role of velocity proportional terms.
97, In: ZAMM - Z. Angew. Math. Mech., (9), John Wiley and Sons, S. 1128-1135, ISSN 0044-2267, DOI: 10.1002/zamm.201600288,
[Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/zamm.201600288/fu...],
[Artikel]

Jin, Le ; Scheerer, Herbert ; Andersohn, Georg ; Oechsner, Matthias (2017):
Tribological behaviour of surface contact friction test with water lubrication at elevated temperatures.
In: Tribologie + Schmierungstechnik 64 (2017), 3, S. 11 – 17. ISSN 0724-3472 <reviewed>, [Artikel]

Junge, Felix ; Abele, Eberhard ; Vogel, Florian (2017):
Qualification of Aqueous Part Cleaning Machines for the Use of Waste Heat in Industrial Production Companies.
61, In: Procedia CIRP, 24th CIRP Conference on Life Cycle Engineering, Kamakura (Japan) Elsevier B.V., S. 570-575, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2016.11.201],
[Artikel]

Junge, Felix ; Helfert, Mark ; Abele, Eberhard ; Vogel, Florian (2017):
Increase in Energy Efficiency of Industrial Production Processes through Thermal Crosslinking of Cutting-Machine Tools and Cleaning Machines by Heat-Pump Technology.
In: Proceedings of the 12th IEA Heat Pump Conference, Rotterdam (Niederlande), S. P.3.7.7, [Artikel]

Kaiser, Joscha ; Meister, Maximilian ; Metternich, Joachim ; Herbert, Thorben (2017):
Entwicklung einer flussorientierten Fertigungssteuerung für die variantenreiche Fertigung im mittelständischen Anlagenbau.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (12), S. 831-834, ISSN 0947-0085, DOI: 10.3139/104.111850,
[Artikel]

Kandlikar, Satish ; Dorao, Carlos Alberto ; Plawsky, Joel L. ; Stephan, Peter (2017):
Special Issue From International Workshop on New Understanding in Nanoscale/Microscale Phase Change Phenomena Held in Trondheim, Norway, June 12-16, 2016.
139, In: Journal of Heat Transfer, (11), DOI: 10.1115/1.4037533,
[Online-Edition: http://dx.doi.org/10.1115/1.4037533],
[Artikel]

Keller, Thimo ; Metternich, Joachim (2017):
Gute digitale Assistenz in der Produktion – Sozialverträglicher Einsatz digitaler Kommunikationstechnologie zur Aufwertung industrieller Arbeit.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (10), S. 658-661, [Artikel]

Kez, V. ; Consalvi, J.L. ; Liu, F. ; Ströhle, Jochen ; Epple, Bernd (2017):
Assessment of several gas radiation models for radiative heat transfer calculations in a three-dimensional oxy-fuel furnace under coal-fired conditions.
120, In: International Journal of Thermal Sciences, S. 289-302, ISSN 12900729, [Online-Edition: https://doi.org/10.1016/j.ijthermalsci.2017.06.017],
[Artikel]

Kienzler, R. ; Schneider, P. (2017):
Second-order linear plate theories: Partial differential equations, stress resultants and displacements.
115/116, In: International Journal of Solids and Structures, Elsevier, S. 14-26, ISSN 0020-7683, DOI: 10.1016/j.ijsolstr.2017.01.004,
[Artikel]

Kirilova, E. ; Petrova, T. ; Becker, Wilfried ; Ivanova, J. (2017):
Influence of the geometry and the frequency range on the interface delamination in smart patch/layer structures under combined dynamic loading.
97, In: Zeitschrift für Angewandte Mathematik und Mechanik - ZAMM, (9), WILEY-VCH, S. 1136-1146, ISSN 1521-4001, [Online-Edition: https://doi.org/10.1002/zamm.201600273],
[Artikel]

Kleemann, Annemie (2017):
Smarte Umformteile - Umgeformte Bauteile für die digitale Welt.
46, In: MaschinenMarkt: MM, Vogel Verlag, Würzburg, S. 62-63, [Online-Edition: https://www.maschinenmarkt.vogel.de/umgeformte-bauteile-fuer...],
[Artikel]

Klingauf, Uwe ; Anger, Christoph ; Kählert, Alexander (2017):
Prädiktive Instandhaltung in der Luftfahrt.
In: Ingenieurspiegel, (1), Public Verlagsgesellschaft Bingen, S. 22-23, ISSN 1868-5919, [Artikel]

Kniepkamp, Michael ; Beermann, Mara ; Abele, Eberhard Selective Laser Melting of Ti6Al4V using Powder Particle Diameters less than 10 Microns.
ISBN 978-3-86359-555-5, In: Proceedings of the 7. WGP-Jahreskongress, Aachen, Apprimus Wissenschaftsverlag; Aachen, S. 137-146, [Artikel]

Koeser, Jan ; Becker, Lukas G. ; Gossmann, Ann-Kathrin ; Boehm, Benjamin ; Dreizler, Andreas (2017):
Investigation of ignition and volatile combustion of single coal particles within oxygen-enriched atmospheres using high-speed OH-PLIF.
36, In: Proceedings of the Combustion Institute, (2), S. 2103-2111, ISSN 1540-7489, [Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.07.083],
[Artikel]

Kraus, Dominik (PtU) ; Lieberenz, Marc ; Groche, Peter (2017):
Reduction of tool wear by systematic design of the tool clamping situation.
In: Journal of Manufacturing Processes, [Online-Edition: https://doi.org/10.1016/j.jmapro.2017.04.011],
[Artikel]

Krumbein, B. ; Jakirlić, S. ; Tropea, C. (2017):
VLES study of a jet impinging onto a heated wall.
68, In: International Journal of Heat and Fluid Flow, S. 290-297, ISSN 0142727X, DOI: 10.1016/j.ijheatfluidflow.2017.09.020,
[Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2017.09.020],
[Artikel]

Krumbein, Benjamin ; Forooghi, Pourya ; Jakirlić, Suad ; Magagnato, Franco ; Frohnapfel, Bettina (2017):
VLES Modeling of Flow Over Walls with Variably-shaped Roughness by Reference to Complementary DNS.
99, In: Flow, Turbulence and Combustion, (3-4), S. 685-703, ISSN 1386-6184, DOI: 10.1007/s10494-017-9867-1,
[Online-Edition: https://doi.org/10.1007/s10494-017-9867-1],
[Artikel]

Krämer, Karl Michael ; Müller, Falk ; Kontermann, Christian ; Oechsner, Matthias (2017):
Estimation of fatigue crack growth under complex loading using an accumulative approach.
In: Materials at High Temperatures 34 (2017), 5 – 6, S. 350 – 361. ISSN 0960-3409, 1878-6413 <reviewed>, [Artikel]

Kucharczyk, Pawel ; Madia, Mauro ; Zerbst, Uwe ; Schork, Benjamin ; Gerwien, Peter ; Münstermann, Sebastian (2017):
Fracture-mechanics based prediction of the fatigue strength of weldments. Material aspects.
In: Engineering Fracture Mechanics 198 (2018), S. 79 – 102 (available online: 26 November 2017). ISSN 0013-7944 <reviewed>, [Artikel]

Kumar, Abhijeet ; Kleinen, J. ; Venzmer, Joachim ; Gambaryan-Roisman, Tatiana (2017):
Effect of Geometry on Electrokinetic Characterization of Solid Surfaces.
33, In: Langmuir, (30), S. 7556-7568, ISSN 0743-7463, DOI: 10.1021/acs.langmuir.7b00344,
[Online-Edition: http://dx.doi.org/10.1021/acs.langmuir.7b00344],
[Artikel]

Kummer, Florian ; Müller, Björn ; Utz, Thomas (2017):
Time integration for extended discontinuous Galerkin methods with moving domains.
In: International Journal for Numerical Methods in Engineering, ISSN 00295981, DOI: 10.1002/nme.5634,
[Online-Edition: https://doi.org/10.1002/nme.5634],
[Artikel]

Körber, Dominik ; Hoche, Holger ; Oechsner, Matthias (2017):
Liquid metal assisted crack formation in zinc melts, representation of the damage pattern using 3D computed tomography. – Flüssigmetallinduzierte Rissbildung in Zinkschmelzen, Darstellung des Schadensbildes mit Hilfe von 3D Computertomografie.
In: Pract. Metallogr. 54 (2017), 2, S. 118 – 136. ISSN 0032-678X <reviewed>, [Artikel]

Langschwager, Kay ; Rudolph, Jürgen ; Scholz, Alfred ; Oechsner, Matthias (2017):
High temperature fatigue of welded joints – experimental investigation and local analysis of butt welded flat and cruciform specimens.
In: Journal of Pressure Vessel Technology 139 (2017), 4, (August), S. 041408-1 – 041408-9 (published online: April 24, 2017). ISSN 1528-8978, 0094-9930 <reviewed>, [Artikel]

Lehn, Andreas ; Mahner, Marcel ; Schweizer, Bernhard (2017):
A contribution to the thermal modeling of bump type air foil bearings: Analysis of the thermal resistance of bump foils.
139, In: Journal of Tribology Transactions of the ASME, (6), S. 061702-061702, ISSN 1528-8897, DOI: 10.1115/1.4036631,
[Artikel]

Li, D. ; Hasse, C. (2017):
Simulation of bubbly flows with special numerical treatments of the semi-conservative and fully conservative two-fluid model.
174, In: Chemical Engineering Science, Elsevier, S. 25 - 39, ISSN 0009-2509, DOI: 10.1016/j.ces.2017.08.030,
[Online-Edition: https://doi.org/10.1016/j.ces.2017.08.030],
[Artikel]

Li, Sushan ; Ochs, Steffen ; Slomski, Elena Maja ; Melz, Tobias (2017):
Design of control concepts for a smart beam structure with sensitivity analysis of the system.
43, In: Computational Methods in Applied Science, Springer International Publishing, S. 115-132, ISSN DOI 10.1007/978-3-319-44507-6_6, [Artikel]

Li, Sushan ; Platz, Roland (2017):
Observations by Evaluating the Uncertainty of Stress Distribution in Truss Structures Based on Probabilistic and Possibilistic Methods.
Vol. 2, In: Journal of Verification, Validation and Uncertainty Quantification, (Issue 3), S. 1-9, [Artikel]

Li, Sushan ; Slomski, Elena Maja ; Melz, Tobias (2017):
Numerical uncertainty analysis of active and passive structures in the structural design phase.
Volume 199, In: Procedia Engineering, Elsevier, S. 1240-1245, [Artikel]

Ma, Peter C. ; Ewan, Tim ; Jainski, Christopher ; Lu, Louise ; Dreizler, Andreas ; Sick, Volker ; Ihme, Matthias (2017):
Development and Analysis of Wall Models for Internal Combustion Engine Simulations Using High-speed Micro-PIV Measurements.
98, In: Flow Turbulence and Combustion, (1), S. 283-309, ISSN 1386-6184, [Online-Edition: http://dx.doi.org/10.1007/s10494-016-9734-5],
[Artikel]

Madia, Mauro ; Schork, Benjamin ; Bernhard, Julian ; Kaffenberger, Matthias (2017):
Multiple crack initiation and propagation in weldments under fatigue loading.
In: Procedia Structural Integrity 7 (2017), S. 423 – 430. ISSN 2452-3216 <reviewed>, [Artikel]

Madia, Mauro ; Zerbst, Uwe ; Beier, Heinz Thomas ; Schork, Benjamin (2017):
The IBESS model – Elements, realisation and validation.
In: Engineering Fracture Mechanics 198 (2018), S. 171 – 208 (available online: 18 September 2017). ISSN 0013-7944 <reviewed>, [Artikel]

Mahner, Marcel ; Li, Pu ; Lehn, Andreas ; Schweizer, Bernhard (2017):
Numerical and Experimental Investigations on Preload Effects in Air Foil Journal Bearings.
140, In: Journal of Engineering for Gas Turbines and Power, (3), ASME, S. 032505-1-032505-9, ISSN 1528-8919, DOI: 10.1115/1.4037965,
[Artikel]

Meinhard, Adrian ; Güth, Sebastian (2017):
Ein Werkzeugbenchmark zum gratminimalen Bohren.
Ausgabe 24, In: MaschinenMarkt : MM, Vogel Verlag, Würzburg, S. 28-32, ISSN 0341-5775, [Artikel]

Meister, Maximilian ; Metternich, Joachim ; Batz, Svenja (2017):
Reifegradmodell für den systematischen Problemlösungsprozess.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (12), S. 848-851, ISSN 0947-0085, [Artikel]

Meißner, Alyssa ; Glass, Rupert ; Gebauer, C. ; Stürmer, S. ; Metternich, Joachim (2017):
Hindernisse der Industrie 4.0 - Umdenken notwendig?
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (9), S. 607-611, ISSN 0947-0085, [Artikel]

Meng, Xiannan ; Wang, Yongqi ; Wang, Chun ; Fischer, Jan-Thomas (2017):
Modeling of unsaturated granular flows by a two-layer approach.
12, In: Acta Geotechnica, (3), S. 677-701, ISSN 1861-1125, DOI: 10.1007/s11440-016-0509-x,
[Online-Edition: http://doi.org/10.1007/s11440-016-0509-x],
[Artikel]

Messig, D. ; Vascellari, M. ; Hasse, C. (2017):
Flame structure analysis and flamelet progress variable modelling of strained coal flames.
21, In: Combustion Theory and Modelling, (4), Taylor & Francis, S. 700-721, ISSN 1741-3559, DOI: 10.1080/13647830.2017.1290279,
[Online-Edition: http://dx.doi.org/10.1080/13647830.2017.1290279],
[Artikel]

Metternich, Joachim ; Müller, Marvin ; Meudt, Tobias ; Schaede, Carsten (2017):
Lean 4.0 – zwischen Widerspruch und Vision.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (5), S. 346-348, ISSN 0947-0085, [Artikel]

Meudt, Tobias ; Kaiser, Joscha ; Metternich, Joachim ; Spiekermann, Sven (2017):
Wertstrommodellierung und -simulation im Zeichen von Digitalisierung und Industrie 4.0.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (12), S. 865-868, ISSN 0947-0085, [Artikel]

Meudt, Tobias ; Metternich, Joachim ; Abele, Eberhard (2017):
Value Stream Mapping 4.0: Holistic Examination of Value Stream and Information Logistics in Production.
66, In: CIRP Annals – Manufacturing Technology, Elsevier Ltd on behalf of CIRP, (1), S. 413-416, ISSN 0007-8506, DOI: 10.1016/j.cirp.2017.04.005,
[Online-Edition: https://doi.org/10.1016/j.cirp.2017.04.005],
[Artikel]

Mohassieb, Shaimaa ; Kirah, Khaled ; Dörsam, Edgar ; Khalil, Ahmed ; El-Hennawy, Hadia (2017):
Effect of silver nanoparticle ink drop spacing on the characteristics of coplanar waveguide monopole antennas printed on flexible substrates.
11, In: IET Microwaves, Antennas & Propagation, (11), S. 1572-1577, ISSN 1751-8725, DOI: 10.1049/iet-map.2017.0078,
[Online-Edition: https://doi.org/10.1049/iet-map.2017.0078],
[Artikel]

Mohassieb, Shaimaa ; Kirah, Khaled ; Dörsam, Edgar ; Khalil, Ahmed ; El-Hennawy, Hadia (2017):
Inkjet Printing of a 20 GHz Coplanar Waveguide Monopole Antenna Using Copper Oxide Nanoparticles on Flexible Substrates: Effect of Drop Spacing on Antenna Performance.
73, In: Progress In Electromagnetics Research C, S. 87-95, [Artikel]

Moog, Daniel ; Weber, Thomas ; Flum, Dominik ; Strobel, Nina ; Schraml, Philipp ; Abele, Eberhard ; Valerie, Scharmer M. ; Popp, Richard S.-H. ; Schulz, Julia ; Zäh, Michael F. (2017):
Energieflexibilitätspotenziale in der Produktionsinfrastruktur.
112, In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, Carl Hanser Verlag, München, (12), S. 852-856, ISSN 0947-0085, DOI: 10.3139/104.111835,
[Artikel]

Möller, Daniel ; Jüngst, Maximilian ; Schiffer, Heinz-Peter ; Giersch, Thomas ; Heinichen, Frank (2017):
Influence of Rotor Tip Blockage on Near Stall Blade Vibrations in an Axial Compressor Rig.
140, In: Journal of Turbomachinery, (2), S. 021007, ISSN 0889-504X, DOI: 10.1115/1.4038316,
[Online-Edition: https://doi.org/10.1115/1.4038316],
[Artikel]

Müller, Marvin ; Schiffbänker, Paul ; Albers, Albert ; Braun, Andreas ; Bursac, Nikola (2017):
Efficient Application of MBSE using Reference Models: A PGE Case Study.
3, In: Proceedings of the 21st International Conference on Engineering Design, Vancouver (Canada), S. 271-280, ISSN 2220-4342, [Artikel]

Ochs, Steffen ; Li, Sushan ; Adams, Christian ; Melz, Tobias (2017):
Efficient Experimental Validation of Stochastic Sensitivity Analyses of Smart Systems.
43, In: Computational Methods in Applied Science (Aurelio L. Araujo, Carlos A. Mota Soares (Hg.)), S. 97-113, ISSN DOI 10.1007/978-3-319-44507-6_5, [Artikel]

Oechsner, Matthias ; Andersohn, Georg ; Beyer, Jörg ; Kontermann, Christian ; Hoche, Holger ; Ellermeier, Jörg (2017):
Hochfeste Werkstoffe im Wettbewerb. Zentrum für Konstruktionswerkstoffe (MPA-IfW) der TU Darmstadt.
In: Jahresmagazin Werkstofftechnik 2017, S. 44 – 50. ISSN 1618-8357, [Artikel]

Oechsner, Matthias ; Siebers, Marius ; Scheerer, Herbert ; Andersohn, Georg ; Abele, Eberhard ; Heep, Thomas (2017):
Drehen von Vermicularguss unter kryogener Kühlung - Untersuchungen zum Einfluss der Prozesskühlung auf Werkstoff- und Spanbildungseigenschaften.
107, In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, (1-2), S. 14-20, ISSN 1436-4980, reviewed*, [Artikel]

Panten, Niklas ; Abele, Eberhard (2017):
Prädiktive Energieflussregelung von Versorgungssystemen.
34, In: Industrie Management, GITO Verlag, Berlin, (1), S. 19-23, ISSN 1434-1980, [Artikel]

Piro, M. H. A. ; Wassermann, F. ; Grundmann, S. ; Tensuda, B. ; Kim, S. J. ; Christon, M. ; Berndt, M. ; Nishimura, M. ; Tropea, C. (2017):
Fluid flow investigations within a 37 element CANDU fuel bundle supported by magnetic resonance velocimetry and computational fluid dynamics.
66, In: International Journal of Heat and Fluid Flow, S. 27-42, ISSN 0142727X, [Online-Edition: https://doi.org/10.1016/j.ijheatfluidflow.2017.04.010],
[Artikel]

Quurck, Lukas ; Richter, Michael ; Schneider, Maximilian ; Franz, Daniel ; Rinderknecht, Stephan (2017):
Design and practical Realization of an innovative Flywheel Concept for industrial Applications.
37, In: Technische Mechanik, (2-5), S. 151-160, [Online-Edition: http://www.ovgu.de/ifme/zeitschrift_tm/2017_Heft2_5/06_Quurc...],
[Artikel]

Ranzi, E. ; Debiagi, P. ; Frassoldati, A. (2017):
Mathematical modeling of fast biomass pyrolysis and bio-oil formation. Note I: Kinetic mechanism of biomass pyrolysis.
5, In: ACS Sustainable Chemistry & Engineering, (4), ACS Publications, S. 2867-2881, ISSN 2168-0485, [Artikel]

Ranzi, E. ; Debiagi, P. ; Frassoldati, A. (2017):
Mathematical modeling of fast biomass pyrolysis and bio-oil formation. Note II: secondary gas-phase reactions and bio-oil formation.
5, In: ACS Sustainable Chemistry & Engineering, (4), ACS Publications, S. 2882-2896, ISSN 2168-0485, [Artikel]

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2017):
In-situ-measurement of the friction coefficient in the deep drawing process.
869, In: Journal of Physics: Conference Series, [Artikel]

Reis, Martina Costa ; Wang, Yongqi (2017):
A two-fluid model for reactive dilute solid–liquid mixtures with phase changes.
29, In: Continuum Mechanics and Thermodynamics, (2), S. 509-534, ISSN 0935-1175, DOI: 10.1007/s00161-016-0546-6,
[Online-Edition: http://dx.doi.org/10.1007/s00161-016-0546-6],
[Artikel]

Ries, Florian ; Janicka, J. ; Sadiki, Amsini (2017):
Thermal Transport and Entropy Production Mechanisms in a Turbulent Round Jet at Supercritical Thermodynamic Conditions.
19, In: Entropy, (8, 404), MDPI, ISSN 1099-4300, [Online-Edition: https://doi.org/10.3390/e19080404],
[Artikel]

Rolfe, A. ; Huang, Y. ; Haaf, M. ; Rezvani, S. ; Dave, A. ; Hewitt, N.J. (2017):
Techno-economic and Environmental Analysis of Calcium Carbonate Looping for CO2 Capture from a Pulverised Coal-Fired Power Plant.
142, In: Energy Procedia, S. 3447-3453, ISSN 18766102, DOI: 10.1016/j.egypro.2017.12.228,
[Online-Edition: https://doi.org/10.1016/j.egypro.2017.12.228],
[Artikel]

Rosendahl, Philipp Laurens ; Stein, Nicolas ; Becker, Wilfried (2017):
Stress solutions for joints with nonlinear adhesives.
17, In: PAMM — Proceedings in Applied Mathematics and Mechanics, S. 341-342, ISSN 1617-7061, DOI: 10.1002/pamm.201710140,
[Artikel]

Rosendahl, Philipp Laurens ; Weißgraeber, Philipp ; Stein, Nicolas ; Becker, Wilfried (2017):
Asymmetric crack onset at open-holes under tensile and in-plane bending loading.
113-114, In: International Journal of Solids and Structures, Elsevier, S. 10-23, ISSN 0020-7683, DOI: 10.1016/j.ijsolstr.2016.09.011,
[Artikel]

Salenbauch, S. ; Sirignano, M. ; Marchisio, D. L. ; Pollack, M. ; D'Anna, A. ; Hasse, C. (2017):
Detailed particle nucleation modeling in a sooting ethylene flame using a Conditional Quadrature Method of Moments (CQMOM).
36, In: Proceedings of the Combustion Institute, (1), Elsevier, S. 771 - 779, ISSN 1540-7489, DOI: 10.1016/j.proci.2016.08.003,
[Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.08.003],
[Artikel]

Schabel, Samuel (2017):
Bauen mit Papier : Neue Anwendungen für einen vielfältigen Werkstoff.
145, In: Wochenblatt für Papierfabrikation, (12), S. 822-825, [Artikel]

Schabel, Samuel (2017):
Bericht der Technischen Universität Darmstadt 2017 : Fachgebiet Papierfabrikation und Mechanische Verfahrenstechnik.
145, In: Wochenblatt für Papierfabrikation, (12), S. 854-855, [Artikel]

Schaede, Carsten ; Metternich, Joachim ; Fassel, Max (2017):
Automatisierte Generierung von CNC-Programmen für die Fertigung individualisierter Produktvarianten.
In: Ingenieurspiegel | Maschinenbau, Public Verlagsgesellschaft, Bingen, (3), S. 34-37, [Artikel]

Schaupp, Eva ; Abele, Eberhard ; Metternich, Joachim (2017):
Potentials of Digitalization in Tool Management.
63, In: Procedia CIRP, 50th CIRP Conference on Manufacturing Systems, Taichung City (China), Elsevier B.V., S. 144-149, ISSN 2212-8271, [Online-Edition: https://doi.org/10.1016/j.procir.2017.03.172],
[Artikel]

Schaupp, Eva ; Metternich, Joachim (2017):
Ziele erkennen, rational handeln. Werkzeugvielfalt, Kostenreduktion, Praxistrends.
150, In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, (4), S. 66-70, ISSN 0043-2792, [Artikel]

Schnabel, Jan Eike ; Yousfi, Mejdi ; Mittelstedt, C. (2017):
Free-edge stress fields in cylindrically curved symmetric and unsymmetric cross-ply laminates under bending load.
180, In: Composite Structures, S. 862-875, ISSN 0263-8223, DOI: 10.1016/j.compstruct.2017.08.002,
[Artikel]

Schneider, Marius ; Schiffer, Heinz-Peter ; Lehmann, Knut (2017):
Parameterised Model of 2D Combustor Exit Flow Conditions for High-Pressure Turbine Simulations.
2, In: International Journal of Turbomachinery, Propulsion and Power, (4), S. 20, ISSN 2504-186X, DOI: 10.3390/ijtpp2040020,
[Online-Edition: https://doi.org/10.3390/ijtpp2040020],
[Artikel]

Schneider, P. ; Kienzler, R. (2017):
Dimensioning of thick-walled spherical and cylindrical pressure vessels.
In: Mathematics and Mechanics of Solids, Sage, ISSN 1741-3028, DOI: 10.1177/1081286517713243,
[Artikel]

Schneider, Patrick ; Kienzler, Reinhold (2017):
A Reissner-type plate theory for monoclinic material derived by extending the uniform-approximation technique by orthogonal tensor decompositions of nth-order gradients.
52, In: Meccanica, (9), S. 2143-2167, ISSN 0025-6455, DOI: 10.1007/s11012-016-0573-1,
[Artikel]

Scholtissek, A. ; Dietzsch, F. ; Gauding, M. ; Hasse, C. (2017):
In-situ tracking of mixture fraction gradient trajectories and unsteady flamelet analysis in turbulent non-premixed combustion.
175, In: Combustion and Flame, S. 243-258, DOI: 10.1016/j.combustflame.2016.07.011,
[Online-Edition: http://dx.doi.org/10.1016%2fj.combustflame.2016.07.011],
[Artikel]

Scholtissek, A. ; Pitz, R. W. ; Hasse, C. (2017):
Flamelet budget and regime analysis for non-premixed tubular flames.
36, In: Proceedings of the Combustion Institute, (1), Elsevier, S. 1349 - 1356, ISSN 1540-7489, DOI: 10.1016/j.proci.2016.06.148,
[Online-Edition: http://dx.doi.org/10.1016/j.proci.2016.06.148],
[Artikel]

Scholz, Alfred ; Kern, Torsten-Ulf ; Reigl, Martin ; Almstedt, Henning ; Oechsner, Matthias (2017):
High-temperature behavior under variable loads – FVWHT Working Groups W9 and W10.
In: VGB PowerTech 97 (2017), 10, S. 58 – 70 (special print, 15 S.). ISSN 1435-3199 <reviewed>, [Artikel]

Schork, Benjamin ; Kucharczyk, Pawel ; Madia, Mauro ; Zerbst, Uwe ; Hensel, Jonas ; Bernhard, Julian ; Tchuindjang, Didi ; Kaffenberger, Matthias ; Oechsner, Matthias (2017):
The effect of the local and global weld geometry as well as material defects on crack initiation and fatigue strength.
In: Engineering Fracture Mechanics 198 (2018), S. 103 – 122 (available online: 30 August 2017). ISSN 0013-7944 <reviewed>, [Artikel]

Schremb, Markus ; Campbell, James M. ; Christenson, Hugo K. ; Tropea, Cameron (2017):